RadioShack 43-144 - Manual

Installing the Charger You can power the charger using the supplied 9V, 210 mA AC adapter.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC outlet. Caution: You must ...

Before using your phone, you must install the battery pack, and then charge it for about 15-20 hours. 1. Press down and slide the battery compartment cover off. 2. Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way), then place the battery pack in t...

NOTES Always place the handset properly on the charger whenever you are recharging the handset. You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for added convenience. • • Registering the Handset You must register the handset to the base befo...

10 Base Model 43-143: 1. On the base, press the MENU soft key. 2. Scroll down to REGISTER HANDSET and press the OK soft key. 3. On the handset, press and hold # until the display reads HANDSET REGISTERING and you hear a beep. 4. When REGISTRATION COMPLETE is displayed; the handset has been registere...

11 3. DEREGISTER HS appears. Move the cursor to select YES. Press the OK soft key. 4. ARE YOU SURE? appears. Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone. Resetting the Handset Without the Base If the original base this handset was registered to is...

1 Controls & Functions Handset 2 1 3 5 4 6 7 8 11 12 1920 2122 13 17 18 15 14 16 9 10 Handset AntennaHeadset Jack Cover Belt Clip HoleSpeakerphone Speaker and RingerHandset Battery CompartmentNew Message indicatorHandset EarpieceHandset DisplaySoft keys /FLASH key (talk/flash) key (phonebook) 1....

1 Reading the Display The handset display uses the following icons to tell you the status of your phone. ICON STATUS DESCRIPTION Talk Appears while on a call. Talk Appears when Privacy mode is turned on. Talk Appears while recording a conversation (Answering System base only). に Talk Appears when yo...

1 The Standby Screen When the phone is in standby, the handset display shows the following items: NOTE Illustration is of a single line system. Dual line systems will have different soft keys and standby screen. Using the Four-way Function Key Your handset has a four-way function key that allows you...

1 Using the Handset Menus To open the menu, press the MENU soft key. Highlight the option you want by pressing the four-way function key. This will move the cursor; the option currently highlighted appears in reversed out text. Select the highlighted option by pressing the OK soft key. To exit the m...

1 Using Your Accessory Handset Making and Receiving Calls Using the handset Using the speakerphone Making a call 1. Remove the handset from the charger. 2. Dial the number. 3. Press /FLASH . 1. Remove the handset from the charger. 2. Dial the number. 3. Press . Answering a call 1. Pick up the handse...

1 Adjusting the Volume Ringer Volume Choose from three ringer volume settings (off, low, and high). With the phone in standby, use and to adjust the ringer volume. Earpiece Volume Choose from six volume levels for the handset. While on a call, press to make the handset volume louder or to make it so...

1 Press to open the Caller ID list. The first thing you will see is the summary screen. From the summary screen, you have the following options: Scroll through the list To scroll through the list from A to Z, press . To scroll through the list from Z to A press . Jump to entries beginning with a par...

0 Using the Phonebook Your phone allows you to store up to 2 numbers per name and up to 100 names in your phonebook. Your phone shares a total of 100 memory entries between your phonebook and CID. Once you store 100 phonebook entries, CID information will not be stored and will only display at time ...

Redialing a Number You can quickly redial the last 3 numbers dialed on the handset.1. With the phone in standby, press REDIAL/PAUSE or the REDIAL soft key to open the redial list. 2. Use and to scroll through the redial list. 3. When you find the number you want to dial, press /FLASH or . NOTE You c...

Care Keep the handset dry; if it gets wet, wipe it dry immediately. Use and store the handset only in normal temperature environments. Handle the handset carefully; do not drop it. Keep the handset away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Service an...

Glossary Accessory Handset — This phone system is expandable: one base supports a total of ten handsets. The accessory handset is a handset that is compatible with this model. Base — The main part of the phone that connects to your phone line. Charger — A cradle that comes with an accessory handset ...