Page 2 - CAUTION
2 This symbol is intended to alert you to the presence of un-insulated dangerous voltage within the product’s enclosurethat might be of sufficient magnitude to constitute a risk ofelectric shock. Do not open the product’s case. This symbol is intended to inform you that important oper-ating and main...
Page 3 - FEATURES; Your System 360 includes these features:
3 FEATURES Your RadioShack System 360 Caller ID with Callback is thelatest in telephone technology. The system displays the call-er’s telephone number (and name, if available in your area)and the current date and time, as provided by your localphone company to Caller ID service subscribers. The sys-...
Page 5 - Important Information:; • To use this system, you must be in an area where Caller
5 Note: You need four AAA batteries (not supplied) to powerthe System 360. This system has been tested and found to comply with allapplicable UL and FCC standards. We recommend you record the system’s serial numberhere. The number is on the system’s bottom panel. Serial Number: _____________________...
Page 6 - FCC INFORMATION; ringer equivalence number; or; FCC Rules
6 FCC INFORMATION We have designed your System 360 to conform to federalregulations, and you can connect it to most telephone lines.However, each Caller ID system (and each device, such asa telephone or answering machine) that you connect to thetelephone line draws power from the line. We refer to t...
Page 7 - Note: You must not connect your System 360 to:; • Coin-operated systems
7 Note: You must not connect your System 360 to: • Coin-operated systems • Party-line systems • Most electronic key telephone systems In the unlikely event that your System 360 causes problemson the phone line, the phone company can temporarily dis-connect your service. If this happens, the phone co...
Page 8 - • Reorient or relocate the radio or TV receiving antenna
8 This system complies with the limits for a Class B device asspecified in Part 15 of FCC Rules . These limits provide rea- sonable protection against radio and TV interference in a res-idential area. However, your System 360 might cause TV orradio interference even when it is operating properly. To...
Page 9 - CONTENTS
9 CONTENTS Preparation ..................................................................... 11 Installing Batteries/Setup .......................................... 11Adjusting the Display Contrast ................................. 17Connecting the System ..............................................
Page 11 - PREPARATION; INSTALLING BATTERIES/SETUP; • Always use fresh batteries of the required size and
11 PREPARATION INSTALLING BATTERIES/SETUP You need four AAA batteries (not supplied) to power thesystem. For the longest operation and best performance, werecommend alkaline batteries, such as RadioShack Cat. No.23-558. Cautions: • Always use fresh batteries of the required size and type. • Do not m...
Page 13 - Turn the system over so; REV; while; ENGLISH; press; once to
13 4. Turn the system over so you can see the display.After you install batteries,the system beeps and dis-plays FA640 REV 1.8 (information about the sys-tem’s software), then SET LANGUAGE for a few sec- onds, then ENGLISH (the default display language)appears for about 45 sec-onds. 5. To select ano...
Page 17 - ADJUSTING THE DISPLAY CONTRAST; Note: Do not hold down
17 ADJUSTING THE DISPLAY CONTRAST To increase the display contrast, hold down DELETE while repeatedly pressing REVIEW . To decrease the display contrast, hold down DELETE while repeatedly pressing REVIEW . Note: Do not hold down DELETE without also pressing one of the REVIEW keys. You could accident...
Page 18 - CONNECTING THE SYSTEM; Connecting to a Phone; Disconnect the telephone line cord from the phone and; Plug one end of the supplied line cord into the system’s; Plug the other end of the cord into the phone’s jack.
18 CONNECTING THE SYSTEM Connecting to a Phone 1. Disconnect the telephone line cord from the phone and plug it into the system’s LINE jack. 2. Plug one end of the supplied line cord into the system’s PHONE jack. 3. Plug the other end of the cord into the phone’s jack. (illustration) 43-980.fm Page ...
Page 19 - Connecting to an Answering Machine; Disconnect the telephone line cord that connects your; Plug the cord’s other end into the answering machine’s
19 Connecting to an Answering Machine 1. Disconnect the telephone line cord that connects your answering machine to your phone from the answeringmachine’s jack. Then plug it into the system’s PHONE jack. 2. Plug one end of the supplied line cord into the system’s LINE jack. 3. Plug the cord’s other ...
Page 20 - MOUNTING THE SYSTEM; Follow these steps to mount the system on a wall.
20 Note: Some answering machines block Caller ID informa-tion from the System 360. If this happens, you might have todisconnect the answering machine. MOUNTING THE SYSTEM You can place the System 360 directly on a desk, shelf, ortable, or mount it on a wall using the supplied mountingbracket and scr...
Page 22 - OPERATION; RECEIVING CALLS; CALL; flashes during a new incoming call, the new call indi-; NEW
22 OPERATION RECEIVING CALLS Caller ID is a service provided by your telephone company.When you subscribe to this service, the telephone companysends the caller’s telephone number (and name, if available)and the call’s date and time between the first and secondrings. The system receives and displays...
Page 23 - , the caller is blocking; MESSAGE
23 If the new call indicator flashes rapidly while the phone isringing and you see PRIVATE CALL , the caller is blocking their name or telephone number from being sent. If you subscribe to your phone company’s message waitingservice, your system can inform you when the phone compa-ny has messages wa...
Page 24 - REVIEWING CALL RECORDS
24 REVIEWING CALL RECORDS Each time you receive a call, your system saves a callrecord in memory that you can review later or while you areon the phone. Your system saves up to 64 call records, then(for subsequent calls) it replaces the oldest call record witheach new one. A stored call record inclu...
Page 26 - Displayed Call Information; The system can display the following information:
26 Displayed Call Information The system can display the following information: Description Display (English, French, Spanish) Appears the first time you review a new call record. XX is the number of new calls. XX NEW CALL(S) (all languages) The caller has blocked the Caller ID Information from bein...
Page 28 - DELETING CALL RECORDS; Deleting a Single Call; Repeatedly press either; key until the call
28 DELETING CALL RECORDS Deleting a Single Call Note: You cannot delete a call marked as a VIP call by us-ing only the steps in this section. See “Using VIP Calls” onPage 31. 1. Repeatedly press either REVIEW key until the call you want to delete appears. 2. Press DELETE twice. (illustration) 43-980...
Page 29 - Deleting All Calls; key until; until; CALLS; USING CALLBACK; to automatically dial it.; DIALING
29 Deleting All Calls 1. Repeatedly press either REVIEW key until --END-- appears. 2. While --END-- appears, hold down DELETE until NO CALLS appears. USING CALLBACK When a phone number youwant to dial appears on thedisplay, you can press CALL- BACK to automatically dial it. DIALING appears, then the...
Page 31 - Calling the Last Reviewed Number; when the current time and date; . To complete the call, pick up the phone within 4; PICKUP; USING VIP CALLS
31 Calling the Last Reviewed Number To call the phone number in the last call record you re-viewed, press CALLBACK when the current time and date appear. The system dials the number and displays PICKUP PHONE . To complete the call, pick up the phone within 4 seconds after PICKUP PHONE appears. USING...
Page 32 - Marking a Call Record as a VIP Call Record
32 Notes: • The system protects VIP call records, to make it difficult to delete them by mistake. To delete a VIP call record,you must first unmark it using the steps in “Unmarking aVIP Call Record” on Page 33 then delete it using thesteps in “Deleting a Single Call” on Page 28. • If you try to mark...
Page 33 - Unmarking a VIP Call Record
33 As you press REVIEW or REVIEW to review stored records, appears on each record marked as a VIP call record. Unmarking a VIP Call Record 1. Repeatedly press REVIEW or REVIEW to display the VIP call record you want to unmark. 2. Hold down CALLBACK until disappears from the display and the system be...
Page 34 - TROUBLESHOOTING; Problem; Blank screen; DATA
34 TROUBLESHOOTING If your system is not working as it should, these suggestionsmight help you eliminate the problem. Problem Solution Blank screen Battery installation — Replace or rein-stall the batteries as described in “In-stalling Batteries/Programming the Mod-ule” on Page 11. Contrast control ...
Page 35 - CARE AND MAINTENANCE
35 CARE AND MAINTENANCE Your RadioShack System 360 Caller ID with Callback is anexample of superior design and craftsmanship. The followingsuggestions will help you care for your system so you can en-joy it for years. Keep the system dry. If it gets wet, wipe it dryimmediately. Liquids might contain...
Page 37 - LIGHTNING
37 LIGHTNING Your system has built-in protection circuits to reduce the riskof damage from surges in telephone and power line current.These protection circuits meet or exceed the FCC require-ments. However, lightning striking the telephone or powerlines can damage your system. Lightning damage is no...
Page 38 - NOTES
38 NOTES 43-980.fm Page 38 Monday, August 16, 1999 4:44 PM
Page 39 - Limited One-Year Warranty
39 Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in mate-rial and workmanship under normal use for one (1) year from the date of pur-chase from RadioShack company-owned stores and authorized RadioShackfranchisees and dealers. EXCEPT AS PROVIDED HEREI...
Page 40 - We Service What We Sell
RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 5A7 Printed in Malaysia (Continued) This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper orabnormal usage, failure to follow instructions, improper installati...
