RadioShack 06A00 - Manual
RadioShack 06A00 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY INSTRUCTIONS
- Page 3 – SPECIFICATIONS
- Page 4 – Limited Ninety-Day Warranty; We Service What We Sell
OWNER’S MANUAL — Please read before using this equipment.
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Compact Ni-Cd/Ni-MH Battery Charger
Your RadioShack Compact Ni-Cd (nickel
cadmium)/Ni-MH (nickel metal hydride) Bat-
tery Charger is designed to charge two or
four batteries — AA and AAA types.
Its features include:
Two Charging Indicators — an indicator
lights during charging for each battery type
(Ni-Cd or Ni-MH), and turns off when charg-
ing is complete.
Reverse Polarity Protection — protects the
charger and batteries against damage from
incorrectly installed batteries.
Automatic Timer Shut-Off — turns off the
charger to prevent overcharging the batter-
ies.
OPERATION
1.
To charge two Ni-Cd or Ni-MH AA bat-
teries, install both into
BAY 1
as indi-
cated by the polarity symbols (+ and –)
marked inside the compartment, then
slide
Ni-Cd/Ni-MH
to the appropriate set-
ting.
Note: Both batteries must be installed in
the same bay.
To charge two Ni-Cd or Ni-MH AAA bat-
teries, install both into the supplied AAA
battery adapter as indicated by the
polarity symbols (+ and –) marked on
the adapter. Then install the battery
adapter into
BAY 1
with the battery con-
tacts facing the top of the bay and the
arrow marked on the adapter pointing
toward the back of the charge bay and
set
Ni-Cd/Ni-MH
to the appropriate set-
ting.
2.
To charge four Ni-Cd or Ni-MH AA bat-
teries, install two batteries into each bay
as indicated by the polarity symbols (+
and –) marked inside each compart-
ment, then slide
Ni-Cd/Ni-MH
to the
appropriate setting.
To charge four Ni-Cd or Ni-MH AAA bat-
teries, install four batteries into the two
supplied AAA battery adapters as indi-
cated by the polarity symbols (+ and –)
marked on the adapters. Then install an
adapter into each bay with the battery
contacts facing the top of the bay and
the arrows marked on the adapters
pointing toward the back of the charge
bay, and slide
Ni-Cd/Ni-MH
to the appro-
priate setting.
Cautions:
Bay 1
Bay 2
Ni-Cd/
Ni-MH
Switch
AAA
Adapter
23-427.fm Page 1 Friday, July 7, 2000 8:12 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 • Do not mix battery types. (Ni-Cd and Ni-MH). • Do not mix AA and AAA battery sizes. Note: The charger does not charge if youinstall two AA or AAA batteries into BAY 2 and leave BAY 1 empty. 3. Lift the prongs of the AC plug until the plug snaps into place. Plug the chargerinto a standard AC outl...
3 SPECIFICATIONS Input ........................................................................................................................................ AC 120V, 60 Hz Output .................................................................................................... DC 2.8V, 170 mA ×...
23-427 0904-211-18801 06A00 Printed in Hong Kong RadioShack CorporationFort Worth, Texas 76102 Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for ninety (90) days from the date of purchase from RadioShac...
