Quatech QSC(LP)-100 - Manual
Quatech QSC(LP)-100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Declaration of Conformity; Application of Council Directive:; Industrial
- Page 6 – General Information
- Page 7 – Hardware Configuration; The QSC(LP)-100 is automatically configured at boot time by the; Factory Default Configuration
- Page 9 – Hardware Installation; computer manufacturer.
- Page 10 – Address Map and Special Registers; The base address and IRQ used by the QSC(LP)-100 are determined by the; Port
- Page 12 – Enhanced Serial Adapter Identification; Read
- Page 14 – Windows Configurations; Windows Millennium; The final dialog screen will verify the file copy from the CD.
- Page 15 – The following dialog box will appear. Insert the Quatech COM CD
- Page 17 – easy configuration in the Windows 95 environment.
- Page 18 – NOTE; Viewing Resources with Device Manager
- Page 19 – do not attempt to modify the configuration values listed.; Click
- Page 21 – Use the Logical COM Port names to access the serial ports on your
- Page 22 – Changing Resource Settings with Device Manager; Device Manager; Double click on the hardware class; Multi-Port Serial Adapters; to list
- Page 23 – tab to view the Input/Output Range and Interrupt Request; Properties; tab to view the clock rate settings.
- Page 25 – Double click the hardware class; Quatech PCI Serial Port; listed in this class is a “child device” of the; dialog for a COM port, then click the; tab to view the settings for that port.
- Page 28 – Other Operating Systems; Device drivers for Windows NT and OS/2 are also available for the; DOS and other operating systems; Custom applications for which the customer has source code can be
- Page 29 – cannot be used to make changes.
- Page 30 – Figure 15 shows the Expert Mode display for the QSC(LP)-100 after the
- Page 31 – External Connections; DTE- and DCE-type devices have complementary pinouts to allow
- Page 32 – Signal
- Page 33 – PCI Resource Map
- Page 34 – Specifications; Serial ports
- Page 36 – 0 Troubleshooting; Listed here are some common problems and frequent causes of those; Computer will not boot up.; Perhaps try a different expansion slot.; Cannot communicate with other equipment.; Is the software configured with the correct base address and IRQ
QSC(LP)-100
Four Channel Low Profile RS-232
Asynchronous Communications Adapter
for PCI bus
User's Manual
QUATECH, INC.
TEL:
(330) 655-9000
5675 Hudson Industrial Parkway
FAX:
(330) 655-9010
Hudson, Ohio 44236
http://www.quatech.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Declaration of Conformity Manufacturer's Name: Quatech Inc. Manufacturer's Address: 5675 Hudson Industrial ParkwayHudson, Ohio 44236 (USA) Application of Council Directive: 89/336/EEC Standards to whichConformity is Declared: * EN50081-1 (EN55022, EN60555-2, EN60555-3) * EN50082-1 (IEC 801-2, IEC 80...
1 General Information The Quatech, Inc. QSC(LP)-100 provides four RS-232 asynchronous serial communication interfaces for Low Profile IBM-compatible personal computersystems using the PCI expansion bus. The QSC(LP)-100 uses Quatech's newEnhanced Serial Adapter design. Legacy serial port data rates a...
2 Hardware Configuration The QSC(LP)-100 is automatically configured at boot time by the computer's BIOS or operating system. There are no required switches or jumpersto set for installation. This chapter lists a number of optional jumper settings that control various hardware features. Jumpers J2-J...
