Quatech IN5420 - Manual
Quatech IN5420 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Express Setup Configuration Page
- Page 7 – Serial Port Pin Out; Serial Port Defaults Settings:; Setting; Second Serial Port
- Page 8 – 675 Hudson Industrial Parkway
Quick Start Guide
AirborneDirect™ Industrial Serial Device Server
ABDG-SE-IN5410/IN5420
Revision v2.1
February 2011
Document Number: 100-8106-210
Kit Contents:
Upon receiving the kit please check that you received the following:
ABDG-SE-IN5410 or ABDG-SE-IN5420 Unit
2dBi, 2.4Ghz 50 ohm, omni-directional antenna
Quick Start Guide
5 VDC power supply (optional, included only if ordered as an accessory)
Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at
(800) 553-1170
or
.
What you will need:
To evaluate the unit you will need the following components and facilities:
ABDG-ET-IN50X0 unit with included antenna attached.
Laptop or desktop system with an Ethernet port.
5-36 VDC power for terminal block attachment, or an AC power outlet for optional ABDG-SE-IN5410/IN5420 power supply.
802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be
known. Required information will include:
o
SSID (Wireless network name).
o
Security settings (WEP, WPA, WPA2, etc.).
o
Security credentials (passphrase, key or certificates).
o
Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
A web browser on the laptop top or desktop (MS Explorer, Firefox, Opera and Chrome v4.0 are supported).
CAT5 Ethernet cable for connecting the Airborne™ device to the laptop or desktop.
Serial cable to connect Airborne™ device to host system.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AirborneDirect™ Serial Device Server Quick Start Guide Quatech, Inc. 100-8106-210 4 February 2011 Express Setup Configuration Page When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is designed to allow a quick device set-up by presenting the...
Serial Port Pin Out Figure 2 - DE-9 Connector Pin-out Table 3 – Serial Port Pin Definition Pin RS232 (DTE) Port 1 & 2 (Default) RS422/485 1 No Connect No Connect 2 RxD RxD+ 3 TxD TxD+ 4 No Connect No Connect 5 GND GND 6 No Connect RxD- 7 RTS No Connect 8 CTS No Connect 9 No Connect TxD- Serial P...
AirborneDirect™ Serial Device Server Quick Start Guide Quatech, Inc. 100-8106-110G 8 4/27/2010 5675 Hudson Industrial Parkway Hudson, OH 44236 Tel: 330.655.9000 800.553.1170 [email protected] www.quatech.com ©2010-2011 Quatech, Inc. All rights reserved.
