Quatech ABDG-ET-DP501/IN5010 - Manual
Quatech ABDG-ET-DP501/IN5010 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – manuf
- Page 4 – Express Setup Configuration Page; Figure 1 - Express Setup Page; Step
- Page 6 – LED
- Page 7 – Table 3 – DP500 Indicator LED’s
- Page 8 – 675 Hudson Industrial Parkway
Quick Start Guide
Airborne Direct Ethernet Adapter
ABDG-ET-DP501/IN5010
Revision v2.1
February 2011
Document Number: 940-0193-210
Kit Contents:
Upon receiving the kit please check that you received the following:
ABDG-ET-DP501 or ABDG-ET-DP5010 Unit
5VDC Power Supply (2.1mm barrel jack)
o
included with ABDG-ET_DP501
o
optional for ABDG-ET-DP5010, included only if ordered as an accessory
2dBi, 2.4Ghz 50 ohm, omni-directional antenna
Quick Start Guide
Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at
(800) 553-1170
or
.
What you will need:
To evaluate the unit you will need the following components and facilities:
ABDG-ET-DP501 or ABDG-ET-IN5010 unit with included antenna attached.
Laptop or desktop system with an Ethernet port.
Power outlet for ABDG-ET-DP501/IN5010 power supply. Optionally 5-36 VDC power for the terminal block attachment (IN5010).
802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be
known. Required information will include:
o
SSID (Wireless network name).
o
Security settings (WEP, WPA, WPA2, etc.).
o
Security credentials (passphrase, key or certificates).
o
Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. 940-0193-210 2 February 2011 Getting Started: 1 Open the AirborneDirect™ packaging and locate the Install CD. 2 Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the AirborneDirect™ device. Follow...
AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. 940-0193-210 4 February 2011 Express Setup Configuration Page When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is designed to allow a quick device set-up by presenting the mos...
AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. 940-0193-210 6 February 2011 Step Description Optional Press Restart [Button] Restarts the device. After the device as rebooted it will attempt to authenticate to the configured network. As long as the network is in range the wireless ...
