QLogic 59244-00 A - Manual
QLogic 59244-00 A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Inventory Feature Licenses
- Page 4 – Remove the Fan Blades
- Page 5 – Remove Brackets and Rails
- Page 6 – Reinstall CPU Blades
- Page 7 – NOTE; Power Up the Switch
- Page 8 – Observe Heartbeat LED; Verify the POST Results
59244-00 A
1
*59244-00 A*
S i m p l i f y
A
SANbox 9000
™
Series
Chassis Replacement Guide
WARNING!!
This guide describes the procedure for one person to replace a SANbox 9000 Series chas-
sis. It involves removing blades while the switch is in the rack, and then removing the empty
chassis. Depending on the location of the switch in the rack, it may be easier to remove the
populated switch from the rack first. In this case, to avoid injury or damage to the switch,
arrange for the help of an assistant when removing or installing a populated switch.
Tools Required
Crosshead screw driver, medium
ESD wrist strap
CAUTION!
Always use an ESD wrist strap when handling and blades and modules.
To avoid damage to the I/O blades, CPU blades, Power Supply blades, and Fan blades,
do not touch the circuit boards and electrical components.
1. Chassis with shipping covers
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SANbox 9000 ™ Series Chassis Replacement Guide 2 59244-00 A A Backup the Switch Configuration Create a backup of the switch configuration if one does not already exist and upload it from the switch to the management workstation. Open a Telnet session and enter the Config Backup command to create the...
SANbox 9000 ™ Series Chassis Replacement Guide 4 59244-00 A A Remove Power Supply Blades WARNING!! The Power Supply blade faceplate and internal surfaces can become very hot. Handle with care. Rotate the latch to the full open position. Pull the Power Supply blade by the latch to disengage the blade...
SANbox 9000 ™ Series Chassis Replacement Guide 59244-00 A 5 A Remove Chassis from the Rack Using a crosshead screw driver, remove the screws that secure the chassis to the rack. Slide the chassis out of the rack. Slide the chassis out of the cabinet until the rail latches drop down to stop the chass...
