QLogic QL A 4 0 5 0 - Manual
QLogic QL A 4 0 5 0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Quick Start Guide; Installation Instructions; Minimum Software Requirements
- Page 4 – PCI Express
- Page 5 – Step 3. Install the HBA Driver
- Page 7 – Windows Vista; Adding the HBA Driver to an Existing Operating System
- Page 8 – SANsurfer for SANblade iSCSI HBAs; Solaris; package selection
- Page 9 – Troubleshooting and Technical Support
- Page 10 – Warranty; Laser Safety; EMI and EMC Requirements; CE Mark 89/336/EEC EMC Directive compliance
- Page 11 – Product Safety Compliance
[
Quick Start Guide
]
QUICK
STAR
T
GUIDE
i S C S I H B A I N S T A L L A T I O N
d
Q L A
®
4 0 5 0 / 4 0 5 0 C / 4 0 5 2 C
Q L E 4 0 6 0 C / 4 0 6 2 C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Quick Start Guide Installation Instructions This Quick Start Guide describes how to install and configure your new QLogic SANblade ® host bus adapter (HBA) and SANsurfer iSCSI HBA Manager application in four simple steps: ❑ Step 1. Verify the package contents. ❑ Step 2. Install the HBA hardware. ❑...
2 Step 1. Verify the Package Contents The QLogic HBA is shipped with the following items: ❑ QLogic SANblade HBA ❑ Low-profile bracket (not available in all models) ❑ Quick Start Guide (this document) ❑ SANsurfer ® for SANblade iSCSI HBAs CD(s) Step 2. Install the HBA Hardware NOTE: When installing t...
3 3. Pull out the slot cover (if any) by removing the screw or releasing the lever. 4. Grasp the HBA by the top edge and seat it firmly into the slot. 5. Refasten the HBA’s retaining bracket using the existing screw or lever. 6. Close the computer cover. 7. Plug in the power cable and turn on the co...
