QLogic 59047-10 D - Manual

59047-10 D xv Reference Guide Simple Network Management Protocol QLogic 3000/5000/9000 Series Fibre Channel Switch 5 Fabric Element MIB Objects Fibre Channel FE MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Configuration Group . . . . . . . . . . . . . . . . . ....

59047-10 D xvii Reference Guide Simple Network Management Protocol QLogic 3000/5000/9000 Series Fibre Channel Switch fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4) . . . . . . . . . . . . . . . . . 5-30 fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5) . . . . . . . . . . . . . . . . . . 5-30 fcFxPortC2...

xviii 59047-10 D Reference Guide Simple Network Management Protocol QLogic 3000/5000/9000 Series Fibre Channel Switch qlgcChFwDwldHostPort (1.3.6.1.4.1.3873.3.1.1.2.5) . . . . . . . . . . . . . 7-3 qlgcChFwDwldPathName (1.3.6.1.4.1.3873.3.1.1.2.6) . . . . . . . . . . . . 7-3 qlgcChFwDwldFileName (1....

59047-10 D xxi Preface This guide describes the support for Simple Network Management Protocol (SNMP) used with QLogic switch products. This Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the QLogic switch products. This guide is organized as follo...

Preface Documentation Conventions xxii 59047-10 D Documentation Conventions This guide uses the following documentation conventions:  NOTE: provides additional information.  CAUTION! indicates the presence of a hazard that has the potential of causing damage to data or equipment.  WARNING!! indic...

Preface Technical Support 59047-10 D xxiii  Text in italics indicates terms, emphasis, variables, or document titles. For example:  For a complete listing of license agreements, refer to the QLogic Software End User License Agreement .  What are shortcut keys ?  To enter the date type mm/dd/yyyy...

59047-10 D 1-1 1 SNMP Overview Simple Network Management Protocol is the protocol governing network management and monitoring of network devices. This Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the QLogic switch products. Specifically, this gui...

1–SNMP Overview Traps 1-2 59047-10 D The Manager is the application through which the network administrator performs network management functions. The SNMP agent is the direct interface on the switch for any SNMP manager connecting to the switch using the SNMP protocol, as shown in Figure 1-1 . The ...

1–SNMP Overview Numbering System Conventions 1-4 59047-10 D Numbering System Conventions The conventions for numbering systems in this guide are as follows:  Decimal = 101  Hexadecimal = 0x101  Binary = 101b

59047-10 D 2-1 2 Configuring a Switch This section describes how to configure a QLogic switch to support SNMP. The following topics are covered:  System specifications and requirements  Configuring a switch using the Telnet command line interface  Configuring a switch using the Enterprise Fabric ...

59047-10 D 3-1 3 MIB-II Objects This section covers the implementation details for the MIB-II on the QLogic switch. A MIB defines the properties of the managed object within the device to be managed. Every managed device keeps a database of values for each definition written in the MIB. It is not th...

3–MIB-II Objects The Interfaces Group 59047-10 D 3-5 The Interfaces Group Implementation of the Interfaces group is mandatory for all systems. ifNumber (1.3.6.1.2.1.2.1) The number of network interfaces (regardless of their current state) present on this system. Syntax INTEGER Access read-only Statu...

3–MIB-II Objects The Address Translation Group 3-12 59047-10 D The Address Translation Group Implementation of the Address Translation group is mandatory for all systems. However, this group is deprecated by MIB-II. That is, it is being included solely for compatibility with MIB-I Nodes, and will mo...

3–MIB-II Objects The IP Group 3-14 59047-10 D The IP Group Implementation of the IP group is mandatory for all systems. ipForwarding (1.3.6.1.2.1.4.1) The indication of whether this entity is acting as an IP Gateway with respect to the forwarding of datagrams received by, but not addressed to, this ...

3–MIB-II Objects ipFragCreates (1.3.6.1.2.1.4.19) 3-20 59047-10 D ipFragCreates (1.3.6.1.2.1.4.19) The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. Syntax Counter Access read-only Status mandatory The IP Address Table The IP address table cont...

3–MIB-II Objects The IP Routing Table 3-22 59047-10 D The IP Routing Table The IP routing table contains an entry for each route presently known to this entity. ipRouteDest (1.3.6.1.2.1.4.21.1.1) The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route...

3–MIB-II Objects The IP Address Translation Table 59047-10 D 3-27 The IP Address Translation Table The IP address translation table contain the IpAddress to`physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (for example, DDN-X.25 has a...

3–MIB-II Objects Additional IP Objects 59047-10 D 3-29 Additional IP Objects Following are the additional IP objects. ipRoutingDiscards (1.3.6.1.2.1.4.23) The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry coul...

3–MIB-II Objects The TCP Group 3-36 59047-10 D The TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in quest...

3–MIB-II Objects The TCP Connection Table 3-40 59047-10 D The TCP Connection Table The TCP connection table contains information about this entity's existing TCP connections. tcpConnState (1.3.6.1.2.1.6.13.1.1) The state of this TCP connection. The only value which may be set by a management station...

3–MIB-II Objects Additional TCP Objects 3-42 59047-10 D Additional TCP Objects Following are the additional TCP objects. tcpInErrs (1.3.6.1.2.1.6.14) The total number of segments received in error (for example, bad TCP checksums). Syntax Counter Access read-only Status mandatory tcpOutRsts (1.3.6.1....

3–MIB-II Objects The UDP Group 59047-10 D 3-43 The UDP Group Implementation of the UDP group is mandatory for all systems which implement the UDP. udpInDatagrams (1.3.6.1.2.1.7.1) The total number of UDP datagrams delivered to UDP users. Syntax Counter Access read-only Status mandatory udpNoPorts (1...

3–MIB-II Objects udpOutDatagrams (1.3.6.1.2.1.7.4) 3-44 59047-10 D udpOutDatagrams (1.3.6.1.2.1.7.4) The total number of UDP datagrams sent from this entity. Syntax Counter Access read-only Status mandatory The UDP Listener Table The UDP listener table contains information about this entity's UDP en...

3–MIB-II Objects The EGP Group 59047-10 D 3-45 The EGP Group Implementation of the EGP group is mandatory for all systems which implement the EGP. egpInMsgs (1.3.6.1.2.1.8.1) The number of EGP messages received without error. Syntax Counter Access read-only Status mandatory egpInErrors (1.3.6.1.2.1....

3–MIB-II Objects egpOutErrors (1.3.6.1.2.1.8.4) 3-46 59047-10 D egpOutErrors (1.3.6.1.2.1.8.4) The number of locally generated EGP messages not sent due to resource limitations within an EGP entity. Syntax Counter Access read-only Status mandatory The EGP Neighbor Table The EGP neighbor table contai...

3–MIB-II Objects egpNeighEventTrigger (1.3.6.1.2.1.8.5.1.15) 3-50 59047-10 D egpNeighEventTrigger (1.3.6.1.2.1.8.5.1.15) A control variable used to trigger operator-initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If...

3–MIB-II Objects The dot3StatTable 59047-10 D 3-51 The dot3StatTable EtherLike-MIB:dot3StatsIndex (1.3.6.1.2.1.10.7.2.1.1) An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified...

3–MIB-II Objects EtherLike-MIB:dot3StatsSymbolErrors (1.3.6.1.2.1.10.7.2.1.18) 3-52 59047-10 D EtherLike-MIB:dot3StatsSymbolErrors (1.3.6.1.2.1.10.7.2.1.18) For an interface operating at 10 Gbps, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or g...

3–MIB-II Objects The SNMP Group 3-54 59047-10 D The SNMP Group Implementation of the SNMP group is mandatory for all systems which support an SNMP protocol entity. Some of the objects defined below will be zero-valued in those SNMP implementations that are optimized to support only those functions s...

3–MIB-II Objects snmpOutTraps (1.3.6.1.2.1.11.29) 59047-10 D 3-61 snmpOutTraps (1.3.6.1.2.1.11.29) The total number of SNMP Trap PDUs generated by the SNMP protocol entity. Syntax Counter Access read-only Status mandatory snmpEnableAuthenTraps (1.3.6.1.2.1.11.30) Indicates whether the SNMP agent pro...

59047-10 D 4-1 4 Fibre Alliance MIB Objects This section covers the implementation details for the Fibre Alliance Management Information Bases (FA-MIB) version 6.0 on the QLogic switch. FA MIB Definitions The FA-MIB version 4.0 is a collection of structured objects that resides on the workstation wi...

4–Fibre Alliance MIB Objects revisionNumber 59047-10 D 4-3 revisionNumber The revision number for this MIB. The format of the revision value is as follows:  (0) = high order major revision number  (1) = low order major revision number  (2) = high order minor revision number  (3) = low order mino...

4–Fibre Alliance MIB Objects Connectivity Unit Group 4-4 59047-10 D Connectivity Unit Group The objects described in this section are not in a table format. An example of how to access one of these objects is: "snmpget localhost public fcmgmt.connSet.uNumber.0". uNumber (1.3.6.1.3.94.1.1) Th...

4–Fibre Alliance MIB Objects Connectivity Table 4-6 59047-10 D Connectivity Table The objects described in this section are in a table format indexed by switch World Wide Name. An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is: "snmpget localhost public fcmgmt.c...

4–Fibre Alliance MIB Objects connUnitStatus (1.3.6.1.3.94.1.6.1.6) 4-8 59047-10 D connUnitStatus (1.3.6.1.3.94.1.6.1.6) Overall status of the connectivity unit. The goal of this object is to be the single poll point to check the status of the connunit. If there is any other component that has warnin...

4–Fibre Alliance MIB Objects connUnitProduct (1.3.6.1.3.94.1.6.1.7) 59047-10 D 4-9 Refer to Table 4-4 for connectivity unit return values. Return value will be OK (3), uninstalled IO or CPU boards are ignored connUnitProduct (1.3.6.1.3.94.1.6.1.7) The sml attribute Config.Snmp.SysDescr. This is the ...

4–Fibre Alliance MIB Objects connUnitControl (1.3.6.1.3.94.1.6.1.22) 59047-10 D 4-15 connUnitControl (1.3.6.1.3.94.1.6.1.22) This object is used to control the addressed connUnit. “Cold Start” and “Warm Start” are as defined in MIB-II and are not meant to be a factory reset.  resetConnUnitColdStart...

4–Fibre Alliance MIB Objects connUnitContact (1.3.6.1.3.94.1.6.1.23) 4-16 59047-10 D connUnitContact (1.3.6.1.3.94.1.6.1.23) Contact information for this connectivity unit, and is persistent across boots. Syntax DisplayString (SIZE (0..79)) Access read-write Status mandatory Return Value The default...

4–Fibre Alliance MIB Objects connUnitEventFilter (1.3.6.1.3.94.1.6.1.25) 59047-10 D 4-17 connUnitEventFilter (1.3.6.1.3.94.1.6.1.25) This value defines the event severity that will be logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in con...

4–Fibre Alliance MIB Objects Revision Table 4-20 59047-10 D Revision Table The objects described in this section are in a table format indexed by World Wide Name and Index. The Table of revisions for hardware and software elements. There are four revision items in each switch. An example of how to a...

4–Fibre Alliance MIB Objects connUnitRevsRevId (1.3.6.1.3.94.1.7.1.3) 59047-10 D 4-21 connUnitRevsRevId (1.3.6.1.3.94.1.7.1.3) A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId. Syntax DisplayString Access read-only Status mandatory Return V...

4–Fibre Alliance MIB Objects Sensor Table 4-22 59047-10 D Sensor Table The objects described in this section are in a table format indexed by World Wide Name and Index. The Index is the sensor number being interrogated. There are six sensor items in each switch. An example of how to access one of th...

4–Fibre Alliance MIB Objects connUnitSensorStatus (1.3.6.1.3.94.1.8.1.4) 4-24 59047-10 D connUnitSensorStatus (1.3.6.1.3.94.1.8.1.4) The status indicated by the sensor. Syntax INTEGER {unknown(1)other(2) - the sensor indicates other than ok (warning or failure).ok(3) - the sensor indicates okwarning...

4–Fibre Alliance MIB Objects connUnitSensorInfo (1.3.6.1.3.94.1.8.1.5) 59047-10 D 4-25 connUnitSensorInfo (1.3.6.1.3.94.1.8.1.5) Miscellaneous static information about the sensor, such as its serial number. Syntax DisplayString Access read-only Status mandatory Return Value Always returns an empty s...

4–Fibre Alliance MIB Objects connUnitSensorType (1.3.6.1.3.94.1.8.1.7) 59047-10 D 4-27 connUnitSensorType (1.3.6.1.3.94.1.8.1.7) The type of component being monitored by this sensor. Syntax INTEGER {unknown(1),other(2),battery(3),fan(4),power-supply(5),transmitter(6),enclosure(7),board(8),receiver(9...

4–Fibre Alliance MIB Objects connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8) 4-28 59047-10 D connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8) The characteristics being monitored by this sensor. Syntax INTEGER {unknown(1),other(2),temperature(3),pressure(4),emf(5),currentValue(6), - current is...

4–Fibre Alliance MIB Objects Port Table 59047-10 D 4-29 Port Table The objects described in this section are in a table format indexed by World Wide Name and Index. The Index is the port number being interrogated. There may be different numbers of ports in each switch so the agent must determine the...

4–Fibre Alliance MIB Objects connUnitPortType (1.3.6.1.3.94.1.10.1.3) 4-30 59047-10 D connUnitPortType (1.3.6.1.3.94.1.10.1.3) The port type. Syntax INTEGER {unknown(1),other(2), not-present(3),hub-port(4), n-port(5), - end port for fabricnl-port(6), - end port for loopfl-port(7), - public loopf-por...

4–Fibre Alliance MIB Objects connUnitPortFCClassOp (1.3.6.1.3.94.1.10.1.5) 4-32 59047-10 D connUnitPortFCClassOp (1.3.6.1.3.94.1.10.1.5) Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to zero. This object has the same def...

4–Fibre Alliance MIB Objects connUnitPortTransmitterType (1.3.6.1.3.94.1.10.1.8) 4-34 59047-10 D connUnitPortTransmitterType (1.3.6.1.3.94.1.10.1.8) The technology of the port transceiver. Syntax INTEGER {unknown(1),other(2), unused(3), shortwave(4), longwave(5), copper(6), scsi(7),longwaveNoOFC(8),...

4–Fibre Alliance MIB Objects connUnitPortModuleType (1.3.6.1.3.94.1.10.1.9) 59047-10 D 4-35 connUnitPortModuleType (1.3.6.1.3.94.1.10.1.9) The module type of the port connector. Syntax INTEGER {unknown(1),other(2), gbic(3), embedded(4), - fixed (oneXnine)glm(5),gbicSerialId(6),gbicNoSerialId(7),gbic...

4–Fibre Alliance MIB Objects connUnitPortControl (1.3.6.1.3.94.1.10.1.16) 59047-10 D 4-39 Each implementation may choose not to allow any or all of these values on a SET. On a read, if you do not support write, then return invalid. Otherwise, return the last control operation attempted. Syntax INTEG...

4–Fibre Alliance MIB Objects connUnitPortHWState (1.3.6.1.3.94.1.10.1.23) 59047-10 D 4-43 connUnitPortHWState (1.3.6.1.3.94.1.10.1.23) The hardware detected state of the port. Syntax INTEGER {unknown(1),failed(2), - port failed diagnosticsbypassed(3), - FCAL bypass, loop onlyactive(4), - connected t...

4–Fibre Alliance MIB Objects Event Table 4-44 59047-10 D Event Table The objects described in this section are in a table format indexed by World Wide Name and Index. The maximum index is determined based on the number of events in the table. An example of how to access one of these objects given a ...

4–Fibre Alliance MIB Objects connUnitEventObject (1.3.6.1.3.94.1.11.1.8) 4-48 59047-10 D connUnitEventObject (1.3.6.1.3.94.1.11.1.8) This is used with the connUnitEventType to identify which object the event refers to. Examples include connUnitPortStatus.connUnitId.connUnitPortIndex and connUnitStat...

4–Fibre Alliance MIB Objects Zone Table 4-54 59047-10 D Zone Table The objects described in this section are in a table format indexed Zone number and Index. The zones are numbered 1 to connUnitZoneSetNumZones, the index represents the members within the zones. An example of how to access one of the...

4–Fibre Alliance MIB Objects Zoning Alias Table 59047-10 D 4-59 Zoning Alias Table The objects described in this section are in a table format indexed by Alias Number and Index. The aliases are numbered 1 to connUnitZoningAliasNumAliases, the index represents the members within the alias. An example...

4–Fibre Alliance MIB Objects Port Statistics Table 4-62 59047-10 D Port Statistics Table The objects described in this section are in a table format indexed by World Wide Name and Index. The index represents the port number to interrogate. An example of how to access one of these objects given a WWN...

4–Fibre Alliance MIB Objects Simple Name Server Table 4-80 59047-10 D Simple Name Server Table The objects described in this section are in a table format indexed by World Wide Name and Index. The index represents the table index. An example of how to access one of these objects given a WWN of 10000...

4–Fibre Alliance MIB Objects connUnitSnsPortType (1.3.6.1.3.94.5.2.1.1.10) 4-84 59047-10 D connUnitSnsPortType (1.3.6.1.3.94.5.2.1.1.10) The port type of this entry in the SNS table. Syntax OCTET STRING (SIZE (1)) Access read-only Status mandatory Return Value A value indicating the PortType for the...

4–Fibre Alliance MIB Objects Platform Table 59047-10 D 4-87 Platform Table The Platform Table is a simple, read-only view of platform registration entries. Platform registry is a service hosted by the connectivity unit, in a very similar manner as the SNS table. The platform table is contained by th...

4–Fibre Alliance MIB Objects Trap Table 4-92 59047-10 D Trap Table Traps are asynchronous messages sent from the agent (residing on the switch) to the manager (residing on the workstation) to identify significant events. There can be up to 5 trap addresses within the trap table. All trap information...

4–Fibre Alliance MIB Objects Related Traps 4-96 59047-10 D Related Traps The following traps contain the trap information being sent from the agent to the manager. connUnitStatusChange (1.3.6.1.3.94.0.1) The overall status of the connectivity unit has changed. The recommended severity level (for fil...

4–Fibre Alliance MIB Objects connUnitEventTrap (1.3.6.1.3.94.0.4) 59047-10 D 4-97 Table 4-29 lists the fields in the connUnitEventDescr variable. Table 4-30 lists the trap information returned for the connUnitEventDescr variable. Table 4-29. connUnitEventDescr Variable Field Descriptions connUnitEve...

4–Fibre Alliance MIB Objects connUnitPortStatusChange (1.3.6.1.3.94.0.6) 59047-10 D 4-99 connUnitPortStatusChange (1.3.6.1.3.94.0.6) The overall status of the connectivity unit has changed. The recommended severity level (for filtering) is “alert”. Sent whenever a UserPort.StateChange or UserPort.Op...

59047-10 D 5-1 5 Fabric Element MIB Objects This section covers the implementation details for the Fabric Element Management Information Bases (FE-MIB) on the QLogic switch. Fibre Channel FE MIB Definitions The textual substitutions in Table 5-1 are specific to the FE-MIB and can be used in place of...

5–Fabric Element MIB Objects Configuration Group 5-2 59047-10 D Configuration Group This group consists of scalar objects and tables. It contains the configuration and service parameters of the Fabric Element and the FxPorts. The group represents a set of parameters associated with the Fabric Elemen...

5–Fabric Element MIB Objects Module Table 5-4 59047-10 D Module Table The objects described in this section are in table format indexed by switch. An example of how to access one of these objects is: "snmpget localhost public fcFeModuleDescr.1". This table contains one entry for each module....

5–Fabric Element MIB Objects fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4) 59047-10 D 5-5 fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4) Switch definitions map 1-to-1 with the MIB definitions. This object indicates the operational status of the module.  online (1) - the module is functioning pro...

5–Fabric Element MIB Objects FxPort Configuration Table 59047-10 D 5-7 FxPort Configuration Table The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is: snmpget localhost public fcFxPortName.1.1. This tab...

5–Fabric Element MIB Objects fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13) 59047-10 D 5-11 fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13) A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort. Syntax TruthValue Access read-only Status current Return Value A...

5–Fabric Element MIB Objects FxPort Physical Level Table 5-14 59047-10 D FxPort Physical Level Table The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is: "snmpget localhost public fcFxPortPhysAdminS...

5–Fabric Element MIB Objects fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2) 59047-10 D 5-15 fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2) The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2), ...

5–Fabric Element MIB Objects fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3) 5-16 59047-10 D fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3) The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has no...

5–Fabric Element MIB Objects The Error Group 59047-10 D 5-21 The Error Group The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is: "snmpget localhost public fcFxPortLinkFailures.1.1". This group ...

5–Fabric Element MIB Objects fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12) 59047-10 D 5-25 fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12) The number of Offline Sequences issued by this FxPort. Syntax Counter32 Access read-only Status current Return Value The total number of TxOflineSeqs sent by a port. A...

5–Fabric Element MIB Objects Class 2 Accounting Table 59047-10 D 5-29 Class 2 Accounting Table The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is: "snmpget localhost public fcFxPortC2InFrames.1.1&#...

5–Fabric Element MIB Objects fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6) 59047-10 D 5-31 fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6) The number of F_BSY frames generated by this FxPort. Syntax Counter32 Access read-only Status current Return Value The total number of FBusy frames generated b...

5–Fabric Element MIB Objects fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5) 59047-10 D 5-33 fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5) The number of Class 3 frames discarded by this FxPort. Syntax Counter32 Access read-only Status current Return Value The total number of Class3Toss discarded by a ...

59047-10 D 6-1 6 QLOGIC MIB Objects This section covers the implementation details for the QLogic Management Information Bases (QLOGIC-MIB) on the QLogic switch. QLOGIC MIB Definitions This MIB replaces the fcFxPortPhysTable module defined in FIBRE-CHANNEL-FE-MIB, and defines volatile control object...

6–QLOGIC MIB Objects fcQxPortPhysOperStatus (1.3.6.1.4.1.1663.1.3.10.1.1.4) 6-2 59047-10 D Refer to Table 6-2 for fcQxPortPhysAdminStatus write values. fcQxPortPhysOperStatus (1.3.6.1.4.1.1663.1.3.10.1.1.4) The current operational status of the FxPort. The testing(3) indicates that no operational fr...

6–QLOGIC MIB Objects Related Traps 59047-10 D 6-3 Related Traps The following traps contain the trap information being sent from the agent to the manager. qlSB2PortLinkDown (qLogicExperimental 0 10) A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the fcQxPo...

59047-10 D 7-1 7 Firmware Download MIB Objects This section covers the implementation details for the Firmware Download Management Information Bases (FD-MIB) on the QLogic switch. Firmware Download MIB Definitions The FD-MIB enables you to download, install, and activate new firmware on QLogic switc...

59047-10 D 8-1 8 Maintenance Panel Health Check MIB Objects This section covers the implementation details for the Maintenance Panel (MP) MIB (QLGC-MP-MIB) on the QLogic 9000 switches. This MIB applies only to the QLogic 9000 switches. Maintenance Panel MIB Definitions The Maintenance Panel MIB allo...

59047-10 D Glossary-1 Glossary AL_PA Arbitrated Loop Physical Address Arbitrated Loop A Fibre Channel topology where ports use arbitration to establish a point-to-point circuit. Arbitrated Loop Physical Address (AL_PA) A unique one-byte value assigned during loop initialization to each NL_Port on a ...

59047-10 D Index-1 Index A Accounting Groups 5-25 Additional IP Objects 3-29 Additional TCP Objects 3-42 Address Translation Group 3-12 Agent 1-1 Alert 1-3 , 4-92 atIfIndex 3-12 atNetAddress 3-13 atPhysAddress 3-13 atTable 3-12 C Capability Group 5-33 Class 1 Accounting Table 5-25 Class 2 Accounting...