Q-See QSZ515D - Manual
Q-See QSZ515D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Baud Rate; Part 2 Functions & Operating Instructions; Set CCTV encoding
- Page 3 – Part 3 Extended Function
- Page 4 – Setting of DIP Switches
- Page 5 – Form of Command Code as follows
QSZ515D
QSZ515D
QSZ515D
QSZ515D
Medium Speed Intelligent Dome PTZ
User’s Manual
Rev 120110
Part 1 Performance Features
◇
4.2”Vandalproof Pan/Tilt Dome Camera
◇
1/3” SONY CCD + SONY DSP
◇
540TVL
◇
Super wide voltage board: 8-18V
◇
High transparent vandal-proof dome cover
◇
5-15mm F2.2 2.0MP auto focus lens
◇
With RS485 remote control, With 128 preset points
◇
360° Horizontal endless rotation, 90° vertical movement
◇
A panoramic view
◇
body rotates flexibly with less noise and
wider view shooting
◇
Memory function at accidental power-off (Settings saved)
Technical Specifications:
Model
PDS-320FZA
Image Sensor
1/3"SONY CCD
Digital Signal Processor
SONY DSP
Signal System
PAL / NTSC
Scanning System
2:1 Interlace
Scanning Frequency(H)
NTSC:15.734KHZ , PAL:15.625KHZ
Sync. System
Internal
Horizontal System540TVL
Effective Pixels
(HxV)
PAL:795×596
NTSC:811×508
Shuttle Speed
PAL=1/50 ~1/100,000 sec
；
NTSC=1/60 ~1/100,000
sec
Mini Illumination
0.01 Lux
S/N Ratio
> 48dB
（
Auto Gain Off
）
Gamma
0.45
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Lens 1.3 Megapixel 5-15mm F2.2 2.0MP auto focus lens White Balance Auto BLC Open Video Output 1.0V P-P,75 Ω BNC AGC Auto Power Voltage Super Wide Voltage (8V~18V) Input Current DC12V+/_20% 50/60Hz, 1.2A above Output Current 12V 800mA Operating Temperature 14°F to 122°F (-10°C to 50 ℃ ) （ relative hu...
5. Large square of monotonous object, like a wall; 6. The object is too dark or vague; 7. The targeted picture is too small 3. 3. Surveillance function a) Set & Transfer the preset points The function of preset positions is, temporarily storing such location parameters as horizontal angle / incl...
Problem Possible reason Solution No movement and ima ge at power-on 1.Check the connection of C power input 2.Turn off power and check t he transformer 1.Check the power connection, make sure the soc ket is well connected 2.Make sure the power outlet is working Power-on shows mage, but the controlle...
