Q-See QT4 - Manual
Q-See QT4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – STEP 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK
- Page 4 – Click on ADD CUSTOM
- Page 5 – Input the information.
Q-
SEE
QT4 and QT52X series Port Forwarding steps:
DVR and PC need to be connected to the same Router.
Things you need to know :
1. Router make and model
2.If customer changed the default router login, then need to know router login (user name and password)
3. need to know IP of dvr and ports of dvr.
STEP 1: FIND THE IP ADDRESS OF THE DVR.
To find out the IP of DVR for QT4 or QT52X series DVR do the following:
Right Click the Mouse to display the menu bar
This will bring up the Main Menu, click on System
Click on the menu icon in the lower left corner.
In the System menu , click on Network
Put a checkmark in the box after Obtain an IP address
automatically. Click TEST button, if you get OK message at
the bottom. Click Apply and Exit.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
After the router has assigned the DVR an IP address Then return to the Network setup screen and enter this information into Go back to the Main Menu and click on the the table in the configuration screen (shown below) and remove Information Icon then Network Icon and write down checkmark from the th...
Select the router from the drop down list. Enter the IPaddress of Router 1 (from Step 2). Enter the Usernameand Password for your router or use the default setting.Then click on + sign at the bottom. Click on ADD CUSTOM
Input the information. Name: any nameType: TCP Start Port: 80 End Port: 80 IP add: IP of DVRClick on ADD Repeat for port 6036 The ports you added will now show on the list. Click on Update Router at the bottom. "Updating is in progress" message will display, wait until you see it say DONE at...
