Q-See QSTD - Manual
Q-See QSTD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Network Setup; Blue box in; PICTURE 7; OK; PICTURE 9; SECTION 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK; FREE; Detect Multiple
- Page 3 – SECTION 2: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM; Download on Mirror 7; Start Menu; Simple Port Forwarding; Section 4; If Multiple Routers are Detected; Port Forwarding
- Page 6 – SECTION 4: SETTING UP DMZ IN ROUTER 2; Section 2; DMZ
Port Forwarding allows computers and devices outside of your network to communicate
with the DVR. You will need to forward ports 80 and 6036 from the attached router to the
IP address of the DVR. Your router must be powered up and attached to the DVR before
proceeding.
Things you will need to know :
1. The make and model of the router.
2. If you changed the default router login, then you will need to know the user name and
password for that router.
3. The IP address for the router.
4. You will be forwarding ports
80
and
2000
.
SECTION 1: DETERMINING THE IP ADDRESS OF DVR
To find out the IP of DVR for QSTD series DVRs do the following:
QSTD Series
Port Forwarding Instructions
NOTE!
The DVR and PC must be connected to the same router.
STEP 1
. Right-click the mouse to
display the
Menu Bar
at the bottom
of the display.
Click on the
Menu
icon.
STEP 2
. This will bring up the
Main
Menu
where you click on
System
.
STEP 3
. Select
Network
(
Red box in
Picture 3
) in the
System Menu
window.
STEP 4
. This is the
Network Setup
window. Put a checkmark in the
DHCP option box (
Red box in
Picture 4
)
Click
OK
button for the router to
assign the DVR an IP address
STEP 5
. After the router has assigned
the DVR an IP address, go back
to the
Main Menu
and click on the
Information icon
STEP 6
. Click on the
Network
Icon
PICTURE 1
PICTURE 3
PICTURE 4
PICTURE 2
PICTURE 5
PICTURE 6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STEP 7 . Write down the IP address, Subnet Mask, and Gateway assigned by the router. STEP 8 . Return to the Network Setup window in Step 4 and enter the information into the appropriate fields. STEP 9 . To prevent the router from changing your address information, remove the checkmark for DHCP ( Blu...
PICTURE 13 PICTURE 15 PICTURE 14 SECTION 2: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM Download the FREE Simple Port Forwarding program from: http://www.simpleportforwarding.com/download Click on Download on Mirror 7 to download and install this program. Once the program is installed, go to the Windows...
SECTION 4: SETTING UP DMZ IN ROUTER 2 NOTE! You will only need to proceed with this section if you detected a second router in Section 2 . NOTE! If you do not have a DMZ setting in the router, check to see if there is a Bridge setting. If so, then use the Bridge setting instead of DMZ. STEP 1 . Logi...
