Q-See QSD2014 - Manual - manualsarea.com

Page 2 - INDEX

INDEX Chapter 1 ： DVR Features .................................................................................................................................... 1 Chapter 2 ： Layout ......................................................................................................................

Page 4 - DVR Features

QSD2014 User’s Manual 1 Chapter 1 ： DVR Features DVR Features  MPEG4 Compression;  Video Input / Output ： 4-CH Video Input- 1-CH Video Output;  Good Image quality, High definition;  System Format: NTSC/PAL ；  Uses SOC chip with high stability;  Linux operation System;  Supports Multiple recor...

Page 7 - Hard Disk Installation; Don’t take out the HDD when DVR is running.; Connecting Camera and Monitor; Please only use the power adapter supplied with the DVR.

QSD2014 User’s Manual 4 Chapter 3 ： DVR Installation 3.1 Hard Disk Installation Notice: Don’t take out the HDD when DVR is running. (1) Remove the top cover carefully; (2) Connect the power cord and data cable to hard drive; (3) Replace the top cover; 3.2 Connecting Camera and Monitor Attach the Cam...

Page 8 - Firmware version

QSD2014 User’s Manual 5 Chapter 4 ： Starting the DVR 4.1 Firmware version 4.2 Detecting Installed Hard Drive 4.3 Format Hard Drive After turning on the unit, DVR will boot-up and display the current version and release date of the DVR firmware. V2.X V-EN-BG 2008.XX.XX During start up, DVR will autom...

Page 9 - Browsing the Main Menu; Camera Setup allows you to turn cameras on or off.; Channel Setup; MAIN MENU; Main Menu

QSD2014 User’s Manual 6 Chapter 5 ： DVR Menu System 5.1 Browsing the Main Menu 5.2 Menu Directory Camera Setup Record Setup Record Framerate Video Quality Record Schedule Sensor Setup Hard Drive Setup Miscellaneous Setup Reset Menu Note: When the DVR is not setup to use a function, the option will n...

Page 10 - Note; Record Setup; Record Framerate

QSD2014 User’s Manual 7 Note ： If a channel is disabled in Channel Setup, DVR will not record or set frame rate. 5.4 Record Setup 5.5 Record Framerate Press [ ▲ ， ▼ ， ◄◄ and ►►] button s to select a channel, and then press [SEL] to increase the value or press [ ■STOP] to reduce the value. Note: High...

Page 11 - Motion Detector Setup; SENSOR SETUP

QSD2014 User’s Manual 8 5.7 Record Schedule Setting the Record Schedule allows you to customize the type of recording you want to use depending on the time of day. NO-RECORD [ WHITE ]:DVR will not record during this period. NORMAL RECORD [ RED ]:DVR will record continuously during this period. SENSO...

Page 12 - HDD SIZE; Miscellaneous Setup – Change Password; Area Selection; Hard Drive Setup; Miscellaneous Setup

QSD2014 User’s Manual 9 Press “Stop” button to disable all areas, and press “Quad” button to select all areas. 5.10 Hard Drive Setup HDD SIZE ： indicates the total capacity of the hard drive installed in the DVR. HDD USED ： indicates the space used in the hard disk drive for recording and the percen...

Page 13 - CON

QSD2014 User’s Manual 10 5.12 Miscellaneous Setup – Set Time 5.13 Miscellaneous Setup – Hidden Channel 5.14 Miscellaneous Setup – Image Parameters The system date and time format is YYYY/MM/DD and HH:MM:SS. Press [ ◄◄] or [ ►►] button s to select a data, press [SEL] button to modify the data, and pr...

Page 14 - Press; s to select

QSD2014 User’s Manual 11 5.15 Miscellaneous Setup – Password Enable 5.16 Miscellaneous Setup – Keypad tones 5.17 Miscellaneous Setup- SEQ. DWELL TIME 5.18 Miscellaneous Setup- VIDEO LOSS SOUND When Password Enable is set to “on”, the password will be required and must be entered correctly; otherwise...

Page 15 - Starting Recording

QSD2014 User’s Manual 12 5.19 RESET MENU System allows you to reset all your settings to the DVR factory default. You need to enter your password to reset the menu. 5.20 NTSC/PAL Output Select Chapter 6 ： Record 6.1 Starting Recording Press [ ●REC] button to start the record according to the record ...

Page 17 - Playback Control; ▲UP; SEACH VIDEO

QSD2014 User’s Manual 14 Chapter 7 ： Playback 7.1 Playback Control Press the [ ►] PLAY button to go into PLAYBACK mode. The newest recorded event will be played. Press the [MENU] button in Playback mode ， the system will list all the recorded events. The latest record will be on top of the list. Pre...

Page 18 - Software Installation; Convert Streams to AVI file; Insert software CD to your CD-ROM drive; Button functions

QSD2014 User’s Manual 15 Chapter 8 ： USB Program 8.1 Software Installation 8.2 Program Interface NOTE: Since this DVR does not support PTZ cameras the functions marked as 1 and 2 will not work. 1. PTZ Control (NO Function) 11. Convert Streams to AVI file 2 Z i Z t 12. Fast Rewind 60s 3. HDD Play Mod...

Page 19 - Program Running

QSD2014 User’s Manual 16 10. Capture Image 20. Audio Slider 8.3 Program Running 8.3.1 HDD Play Mode System will detect HDD automatically when you connect DVR to your PC with USB cable. An icon “ ” will appear in the system tray (right bottom corner of the screen). After seeing this icon, double-clic...

Page 21 - DVR Specification; Items

QSD2014 User’s Manual 18 Chapter 9 ： Specification DVR Specification Items Descriptions Video Standard NTSC/PAL Video Input / Output 4-Channels /1Channels Pre-view Resolution NTSC ： 720X480@30fps (Each CH) PAL ： 720X576@25fps (Each CH) Features Full-D1, 1-Channel/4-Channel 1-channel Playback display...

Page 22 - Appendix; System Connection Layout

QSD2014 User’s Manual 19 Chapter 10 ： Appendix 10.1 System Connection Layout 10.2 Accessories

Page 23 - Q-See Product Warranty; Thank you for choosing our products.

QSD2014 User’s Manual 20 Q-See Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Pe...

Q-See QSD2014 - Manual

Table of Contents:

Summary

Other Q-See Models