Q-See 9004 - Manual
Q-See 9004 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PICTURE 9; SECTION 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK; FREE; Detect Multiple; If Multiple Routers are Detected; Port Forwarding
- Page 3 – SECTION 3: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM; Download on Mirror 7; Start Menu; Simple Port Forwarding; ADD CUSTOM
- Page 4 – DONE; Test that the ports
- Page 5 – Your Internet Address:; SECTION 4: SETTING UP DMZ IN ROUTER 2; Section 2
Things you will need to know :
1. The make and model of the router.
2. If you changed the default router login, then you will need to know the user name and
password for that router.
3. The IP address for the router.
4. You will be forwarding ports
80
,
9000
and
18004
.
SECTION 1: FIND OUT THE IP ADDRESS OF DVR
To find out the IP of DVR for your DVR do the following:
QR, QSDR, and 9004 Series
Port Forwarding Instructions
NOTE!
The DVR and PC must be connected to the same router.
Using the mouse, right-click and then select
Main Menu
in the pop-up menu.
Select
NETWORK
in the
Main Menu
window.
STEP 1.
Select
DHCP
from the
Type
drop-down menu,
STEP 2.
Click on
APPLY
STEP 3.
Select
EXIT
.
STEP 4.
Restart the DVR.
Once the DVR has restarted, reopen the
Network Setup
window and the IP address
of the DVR will now be listed.
Forward ports 80 and 9000 to this IP
address.
If you are going to access the DVR from a
smart phone you will also need to go the
Mobile Setup
and set up the DVR for smart
phone access.
Go to the Main Menu and click on the
DEVICES
icon.
Then click on the
MOBILE
icon.
Enter the User Name and Password you
wish to use when accessing the DVR via a
smartphone.
Smartphones will access the DVR using port
18004. This port will need to be forwarded
along with ports 80 and 9000.
1
2
3
UPNP
OFF
PICTURE 1
PICTURE 2
PICTURE 3
PICTURE 4
PICTURE 5
PICTURE 6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STEP 5. Click on CHECK NOW to detect how many Routers are in the network. In this case, you will need to proceed with the next section using the IP address for Router 1 to forward its ports. After that, you will need to proceed to Section 4 . PICTURE 9 PICTURE 7 PICTURE 8 SECTION 2: DETERMINE THE NU...
SECTION 3: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM Download the FREE Simple Port Forwarding program from: http://www.simpleportforwarding.com/download Click on Download on Mirror 7 to download and install this program. Once the program is installed, go to the Windows Start Menu (Windows icon in the ...
You will now be returned to the main window of the program. The ports you added will now show on the list. Click on Update Router at the bottom. You will see the “Updating is in progress” message. Please wait until you see it say DONE at the bottom. If for some reason, a port or ports that you forwa...
