Primera RW-12 - Manual
Primera RW-12 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Section 1: Unpack and Inspect
- Page 5 – Section 3: Attach Label Stock; the rewinder by moving the printer from side to side.
- Page 6 – Section 4: Operation
- Page 7 – Specifications
© 2010 All rights reserved
Quick Start Guide
Unpack and Inspect 3
Setup 4
Attach Label Stock 5
Operation
6
Specifications 7
511279-120110
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Section 1: Unpack and Inspect Thank you for purchasing the RW-12. The RW-12 Label Rewinder makes it easy to rewind large quantities of labels. Its perfect for use with Primera’s entire line of LX-Series Label Printers and many other label printers. Chuck Support Bar Chuck Chuck Tension Knob Adjust...
5 Section 3: Attach Label Stock 1. Locate a suitable core on which to rewind labels. The core should be equal to or less than the width of the liner width. 2. Remove the Chuck Support Bar by unscrewing the thumb screw at the base. 3. Place the core on the chuck. 4. Place the Adjustable Label Guide o...
6 8. Before you attach the label stock print a header of approximately 2 feet (61 cm) of label stock. 9. Feed the header under the dancer arm. 10. Attach the stock to the core using tape. 11. Turn on the rewinder. 12. Start your print job. Section 4: Operation During normal operation the following w...
