Primera DX850 - Manual
Primera DX850 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Section 1: Unpacking and Setup
- Page 4 – Section 2: Loading the Label Stock
- Page 9 – Section 3: Dispensing the Label
- Page 11 – Section 4: Using the Control Panel
- Page 12 – Section 5: Label Path Diagram; Label Path; Label Path Diagram; Front or Rear Liner Output
- Page 13 – Troubleshooting; Maintenance; Section 6: Troubleshooting and Maintenance
- Page 14 – Section 7: Specifications
Quick S
tart
© 2009 All rights reserved
Unpacking and Setup
3
Loading the Label Stock
4
Dispensing the Label
9
Using the Control Panel
11
Label Path Diagram
12
Troubleshooting and Maintenance 13
Specifications
14
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank you for purchasing the DX850 Label Dispenser (hereafter referred to as "Label Dispenser"). The Label Dispenser includes a Power Cord, 12 volt Power Adapter and the parts shown in Figure 1-1. The Roll Bar, Roll Guides and Roll Drag Arm are located in the supply box along with the Power ...
1. Remove the Roll Bar and Roll Guides from the Label Dispenser. The Roll Guides and Roll Drag Arm are removable and adjustable. They are held in place magnetically. (Figure 2-1.) 2. Remove one Roll Guide and the Roll Drag Arm from the Roll Bar. 3. Place the label stock roll on the Roll Bar with one...
DX850 Label Dispenser 9 To dispense a label, first load label stock as described in Section 2, connect power and switch on the Label Dispenser. Follow these steps to dispense labels. 1. Before you start dispensing you should adjust the Label Sensor on the Label Sensor Bracket so that the distance be...
