Power King PK0913DD - User Manual

POWERKING 1-800-344-3371 [email protected] - 4 - Protecting Yourself and Those Around You WARNING Unsafe operation can create several hazards for you, as well as anyone else in the vicinity. Always take the following precautions when using this machine: A ． Keep in mind that the operator is responsi...

POWERKING 1-800-344-3371 [email protected] - 5 - gas. B ． Store all fuel and oil in containers specifically designed and approved for this purpose and keep away from heat and open flame, and out of the reach of children. C ． Replace rubber fuel lines and grommets when worn or damaged. D ． Fill the g...

POWERKING 1-800-344-3371 [email protected] - 6 - E ． Never use the machine without ensuring that all guards and shields are in place. F ． Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the Wood Chipper. This includes all shields and guards. Modificati...

POWERKING 1-800-344-3371 [email protected] - 7 - Getting Familiar with your Wood Chipper It may be helpful to familiarize yourself with the controls and features of the Wood Chipper. If you have any question, please contact the QVTools Power King support at 1-800-344-3371 or [email protected]. Techn...

POWERKING 1-800-344-3371 [email protected] - 8 - Operating the Wood Chipper WARNING A ． Read and understand all instructions, safety precautions, and/or warnings listed in “ General Safety Rules” before opera ting the WOOD CHIPPER. If any doubt or question arises about the correct or safe method of ...

POWERKING 1-800-344-3371 [email protected] - 9 - engine at idle for 3 to 4 minutes, then advance the engine throttle control to the maximum speed. 8. Always keep unit at full throttle when chipping. Stopping Turn the Multi-Use lever to the OFF position. WARNING Do not put your hands into the chute w...

POWERKING 1-800-344-3371 [email protected] - 10 - Maintenance Regular maintenance is the way to ensure the best performance and long life of your machine. Check all the parts regularly with 1-2 times monthly including bearing, blades, etc. Replace the blades as soon as the chipping performance begin...

POWERKING 1-800-344-3371 [email protected] - 11 - Lubrication NOTICE All Bearings of your Chipper are sealed units and should have sufficient lubricant to last the life of your machine with normal use. Tire Pressure Recommended tire pressure is 10PSI. Blade Replacement Put a log or wood branch to ke...

POWERKING 1-800-344-3371 [email protected] - 12 - Assembly Step 1: Install wheels with Axle, affix with Pin. Step 2: Install the Axle on the frame by bolts, washers and nuts.

POWERKING 1-800-344-3371 [email protected] - 14 - Troubleshooting The common faults Elimination method 1 The engine cannot be started Read the engine users ’ manual, check the fuel ON-OFF valve and check proper oil level. 2 Engine flameout midway Check if the engine is stopped by overloading, check ...

POWERKING 1-800-344-3371 [email protected] - 16 - No. Specification 1 Kohler RH265 Engine 2 Feed Hopper 3 Exit Hopper 4 Debris Diverter 5 Frame 6 Drum Housing 7 Drum 8 Blade 9 Bar Blade (Anvil) 10 Drum Housing Side Cover 11 Wheel 12 Rubber Stand 13 Drum Bearing 14 Rubber Guard 15 Rubber Guard Mount ...