Page 2 - Contents
POWERKING 1-800-344-3371 [email protected] - 1 - Contents General Safety Rules ......................................................................................................................................... - 2 - Getting Familiar with your Wood Chipper ........................................
Page 3 - Additional Information and Potential Changes; General Safety Rules; Safety Labels Found on Your Unit
POWERKING 1-800-344-3371 [email protected] - 2 - Additional Information and Potential Changes We reserve the right to discontinue, change, and improve its products at any time without notice or obligation to the purchaser. The descriptions and specifications contained in this manual were in effect a...
Page 4 - Before using the wood chipper
POWERKING 1-800-344-3371 [email protected] - 3 - CAUTION This machine is designed solely to chip wood and must not be used for any other purpose. It should only be used by trained operators who are familiar with the content of this manual. It is potentially hazardous to fit or use any parts other th...
Page 5 - Protecting Yourself and Those Around You; Safety for Children and Pets
POWERKING 1-800-344-3371 [email protected] - 4 - Protecting Yourself and Those Around You WARNING Unsafe operation can create several hazards for you, as well as anyone else in the vicinity. Always take the following precautions when using this machine: A ． Keep in mind that the operator is responsi...
Page 6 - disconnect the spark; General Safety
POWERKING 1-800-344-3371 [email protected] - 5 - gas. B ． Store all fuel and oil in containers specifically designed and approved for this purpose and keep away from heat and open flame, and out of the reach of children. C ． Replace rubber fuel lines and grommets when worn or damaged. D ． Fill the g...
Page 7 - Don
POWERKING 1-800-344-3371 [email protected] - 6 - E ． Never use the machine without ensuring that all guards and shields are in place. F ． Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the Wood Chipper. This includes all shields and guards. Modificati...
Page 8 - Getting Familiar with your Wood Chipper; Technical Specs
POWERKING 1-800-344-3371 [email protected] - 7 - Getting Familiar with your Wood Chipper It may be helpful to familiarize yourself with the controls and features of the Wood Chipper. If you have any question, please contact the QVTools Power King support at 1-800-344-3371 or [email protected]. Techn...
Page 9 - Operating the Wood Chipper; Starting
POWERKING 1-800-344-3371 [email protected] - 8 - Operating the Wood Chipper WARNING A ． Read and understand all instructions, safety precautions, and/or warnings listed in “ General Safety Rules” before opera ting the WOOD CHIPPER. If any doubt or question arises about the correct or safe method of ...
Page 10 - Stopping
POWERKING 1-800-344-3371 [email protected] - 9 - engine at idle for 3 to 4 minutes, then advance the engine throttle control to the maximum speed. 8. Always keep unit at full throttle when chipping. Stopping Turn the Multi-Use lever to the OFF position. WARNING Do not put your hands into the chute w...
Page 11 - Maintenance
POWERKING 1-800-344-3371 [email protected] - 10 - Maintenance Regular maintenance is the way to ensure the best performance and long life of your machine. Check all the parts regularly with 1-2 times monthly including bearing, blades, etc. Replace the blades as soon as the chipping performance begin...
Page 12 - Lubrication
POWERKING 1-800-344-3371 [email protected] - 11 - Lubrication NOTICE All Bearings of your Chipper are sealed units and should have sufficient lubricant to last the life of your machine with normal use. Tire Pressure Recommended tire pressure is 10PSI. Blade Replacement Put a log or wood branch to ke...
Page 13 - Assembly
POWERKING 1-800-344-3371 [email protected] - 12 - Assembly Step 1: Install wheels with Axle, affix with Pin. Step 2: Install the Axle on the frame by bolts, washers and nuts.
Page 15 - Troubleshooting
POWERKING 1-800-344-3371 [email protected] - 14 - Troubleshooting The common faults Elimination method 1 The engine cannot be started Read the engine users ’ manual, check the fuel ON-OFF valve and check proper oil level. 2 Engine flameout midway Check if the engine is stopped by overloading, check ...
Page 17 - Specification
POWERKING 1-800-344-3371 [email protected] - 16 - No. Specification 1 Kohler RH265 Engine 2 Feed Hopper 3 Exit Hopper 4 Debris Diverter 5 Frame 6 Drum Housing 7 Drum 8 Blade 9 Bar Blade (Anvil) 10 Drum Housing Side Cover 11 Wheel 12 Rubber Stand 13 Drum Bearing 14 Rubber Guard 15 Rubber Guard Mount ...
