Porter-Cable 877 - Manual

Porter-Cable 877

Porter-Cable 877 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
Page: / 17

Table of Contents:

  • Page 2 – GENERAL SAFETY RULES; FOR ALL BATTERY OPERATED TOOLS; WORK AREA
  • Page 6 – ADDITIONAL SAFETY RULES FOR HAMMER-DRILLS; FUNCTIONAL DESCRIPTION; FOREWORD
  • Page 7 – ADJUSTING TORQUE COLLAR
  • Page 8 – DRIVER BIT STORAGE; OPERATION; CHARGING THE BATTERY PACK GENERAL; Battery temperature will increase during and shortly after use.; NORMAL CHARGING; Disconnect charger from power source when not in use.
  • Page 9 – A B
  • Page 10 – IT’S
  • Page 11 – enlarge it to the required size.; DRIVING WOOD SCREWS; Drill pilot and shank clearance holes. See following chart.; SUGGESTED HOLE SIZES; IT’S A
  • Page 12 – Drilling Concrete
  • Page 13 – Extreme care should be taken in the event bit should; MAINTENANCE; KEEP TOOL CLEAN; Remove battery pack to prevent accidental start-up.; REMOVE
  • Page 14 – SERVICE AND REPAIRS; ACCESSORIES; SPARE BATTERY PACKS
  • Page 15 – NOTES
  • Page 16 – ONE YEAR WARRANTY
  • Page 17 – DELTA SERVICE CENTERS; CANADIAN PORTER-CABLE
Loading the manual

Two-Speed Cordless
Hammer Drill/Drivers

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.

Part No. 900470-0011

ESPAÑOL: PÁGINA 17
FRANÇAISE : PAGE 35

MODEL 877

Hammer Drill/Driver

MODEL 8723

Battery Pack

MODELS

8604 and 8624

Chargers

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

MODEL 887

Hammer Drill/Driver

MODEL 8823

Battery Pack

Copyright © 2000 Porter-Cable Corporation

900470 - 11-30-00.QXD 9/25/02 11:09 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - GENERAL SAFETY RULES; FOR ALL BATTERY OPERATED TOOLS; WORK AREA

2 GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fireand/or serious personal injury. WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER C...

Page 6 - ADDITIONAL SAFETY RULES FOR HAMMER-DRILLS; FUNCTIONAL DESCRIPTION; FOREWORD

6 ADDITIONAL SAFETY RULES FOR HAMMER-DRILLS 1. Apply forward force only on pistol grip handle and ONLY with your hands when drilling. 2. Do not use bits larger than those recommended. They may cause personal injury due to jamming and loss of control. Large bits may alsooverload the drill and damage ...

Page 7 - ADJUSTING TORQUE COLLAR

7 INSTALLING AND REMOVING DRILLAND SCREWDRIVER BITS 1. CAUTION: Always set reversing button to center (locked OFF) position wheninstalling and removing bits. 2. The three-jaw chuck is designed for self-centering of the bit. Open jaws largeenough by turning outer sleeve (A) Fig. 2,counterclockwise, w...

Other Porter-Cable Models