Porter-Cable 352VS - Manual

Porter-Cable 352VS

Porter-Cable 352VS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – SAFETY GUIDELINES - DEFINITIONS; WORK AREA; Keep your work area clean and well lit.; ELECTRICAL SAFETY; Read and understand all instructions.; Failure to; SAVE THESE INSTRUCTIONS.; GENERAL SAFETY RULES
  • Page 5 – Hz; LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL.; Persons removing paint should follow these guidelines:; KEEP THE WORK AREA WELL VENTILATED.; Open the windows and; REMOVE OR COVER; in the work area to catch any paint chips or; ADDITIONAL SAFETY RULES FOR PAINT REMOVAL
  • Page 7 – DISCONNECT TOOL FROM POWER SOURCE.; FUNCTIONAL DESCRIPTION
  • Page 8 – Some sanding belts are bi-directional. These belts will not have; TO START AND STOP THE BELT SANDER; To release the lock button, squeeze the trigger and release.; VARIABLE SPEED; To prevent excessive wear on both the sander and belt,; NEVER; allow the; OFF”; necting the tool to the power source.
  • Page 9 – Hold the sander off the work before starting the motor.
  • Page 10 – Lift the tool from the work before turning the motor off.; FAST SANDING ON ROUGH WORK; R e a d a n d f o l l o w “; A D D I T I O N A L S A F E T Y R U L E S F O R; section of this manual.; SPECIAL SANDING PROCEDURES
  • Page 11 – BE CAREFUL; when sanding at the; SANDING METAL
  • Page 12 – KEEP TOOL CLEAN; Wear safety glasses while using compressed air.; FAILURE TO START; MAINTENANCE
  • Page 13 – ACCESSORIES; for a catalog or for the name of your nearest
  • Page 14 – ONE YEAR WARRANTY
  • Page 15 – PORTER-CABLE • DELTA SERVICE CENTERS
Loading the manual

BELT SANDER

Part No. 899748 - 04-21-03

ESPAÑOL: PÁGINA 15
FRANÇAISE : PAGE 31

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who is
to use this equipment carefully reads and
u n d e r s t a n d s t h e s e i n s t r u c t i o n s b e f o r e
starting operations.

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 200

3

Porter-Cable Corporation

MODEL352VS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SAFETY GUIDELINES - DEFINITIONS; WORK AREA; Keep your work area clean and well lit.; ELECTRICAL SAFETY; Read and understand all instructions.; Failure to; SAVE THESE INSTRUCTIONS.; GENERAL SAFETY RULES

2 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some example of these chemicals are: ● ● lead from lead-based paints ● ● crystalline si...

Page 5 - Hz; LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL.; Persons removing paint should follow these guidelines:; KEEP THE WORK AREA WELL VENTILATED.; Open the windows and; REMOVE OR COVER; in the work area to catch any paint chips or; ADDITIONAL SAFETY RULES FOR PAINT REMOVAL

5 SYMBOL DEFINITION V ........................ volts A ........................ amperes Hz ........................ hertz W ........................ watts kW ........................ kilowatts µ F ........................ microfarads l ........................ liters kg ........................ kilo...

Page 7 - DISCONNECT TOOL FROM POWER SOURCE.; FUNCTIONAL DESCRIPTION

7 If an extension cord is to be used outdoors it must be marked with the suffixW-A or W following the cord type designation. For example – SJTW-A toindicate it is acceptable for outdoor use. RECOMMENDED EXTENSION CORD SIZES FOR USE WITH PORTABLE ELECTRIC TOOLS FOREWORD The Porter-Cable Variable Spee...

Other Porter-Cable Models