Polk Audio SURROUNDBAR3000IHTSYS - Manual

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; EXPLOSION; CAUTION; ENGLISH

2 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600) IMPORTANT SAFETY INSTRUCTIONS This product was designed and manufactured to meet strict quality and safety standards.There are, however, some installation and operation precautions which you shouldbe particularly awa...

Page 3 - VOL

PLEASE TAKE INVENTORY Please check to ensure you have everything in your Polk Audio ® SurroundBar ® 3000 Instant Home Theater ® (IHT) carton. Inside, you should find: SurroundBarSubwooferSubwoofer Power Cord20V Power Supply6' Digital (Optical) Cable1/8" to 1/8" analog cable1/8" to RCA ad...

Page 5 - SUBWOOFER CONTROLS; Don’t forget to select the same; SUBWOOFER LEDS; Specifications

SUBWOOFER CONTROLS 1. Channel ID Switch —Selects the “channel” for the wireless subwoofer signal. Don’t forget to select the same “channel” on the bar. 2. Power Switch —Turns the wireless subwoofer on and off, but you can leave it on all the time if you wish. 3. Power Connection —The subwoofer power...

Page 6 - Here’s a little trick:; If you place; Overall Dimensions

WHERE TO LOCATE YOUR BARFOR THE BEST SOUND It’s easy. The bar comes with rubber pads already attached,so it will sit securely on any flat surface. Just center the barunder your TV screen. If your TV is housed in a media center,you can place the bar above the TV. If your TV is wall mounted, the bar c...

Page 7 - HEADPHONE

HOW TO CONNECT YOUR BAR This is really easy, too. You probably have two sourcesfor a signal: your TV or a cable/satellite TV box. We recommend you use the optical output from your TVso you can enjoy the highest quality audio for TV and DVD’s. In the event that your TV does not have an optical output...

Page 8 - FINE TUNING YOUR SURROUNDBAR 3000 IHT

HOW TO OPTIMIZE THE SOUNDWHEN TV SPEAKERS ARE ON You should hear sound from the bar. If you don’t, turn upthe volume on the bar using its volume control buttons. If your bar is connected to your TV, there’s a very good chanceyour TV speakers are also playing. It’s impossible to give specificinstruct...

Page 9 - Press and release Volume Up “; Blinks orange; LED; then turns solid green; SUB VOLUME CONTROL ON THE BAR

2 LED 3 5 4 LED VOL SOURCE LEARN MUTE LED Press and hold “LEARN” for 2 seconds, or until LEDblinks orange, then release the “LEARN” button. 1 The SurroundBar is turned on and the LED is solid green.And you have sound coming from the bar. Hold TV remote 1' - 2' from SurroundBar. Press and release Vol...

Page 10 - TROUBLESHOOTING; The bar learns almost all IR commands,

TROUBLESHOOTING The bar does not power on. Ensure you have plugged the power supplyinto a live wall outlet.Ensure that all components of the powersupply are connected properly.Ensure the power supply is properly connectedto the bar power input.Ensure the rear panel power switch is in the “on” positi...

Page 11 - FAQ’S; You have several options for connecting your audio:; What if my provided optical cable is too short?; There are three ways to control your SurroundBar 3000:; To contact Customer Service:; Products that have earned the Energy Star; A Note Regarding Wireless Performance:; WARNING: LISTEN CAREFULLY

FAQ’S (FREQUENTLY ASKED QUESTIONS) My TV does not have an optical output.How do I connect my audio? You have several options for connecting your audio: Use the optical output of your source unit (cable/satellite box,DVD player, etc.) and connect directly to the SurroundBar 3000using the supplied opt...

Polk Audio SURROUNDBAR3000IHTSYS - Manual

Table of Contents:

Summary

Other Polk Audio Models