Page 2 - This TV incorporates High-Defi nition Multimedia Interface (HDMI
This TV incorporates High-Defi nition Multimedia Interface (HDMI TM ) technology. HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product contains electrical or electronic materials. The presence of these materials may...
Page 3 - ENGLISHENGLISH; Federal Communications; Increase the separation between the equipment and receiver.
ENGLISHENGLISH 1 FCC Federal Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resident...
Page 4 - Warnings and Precautions; CAUTION
2 Warnings and Precautions Warnings and Precautions To reduce the risk of fi re or electric shock, do not expose this equipment to rain or moisture. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualifi ed serv...
Page 6 - Outdoor; Ground clamps; If an outdoor antenna is connected, follow the precautions below:
4 Warnings and Precautions Outdoor Antenna Safety Instructions Antenna lead-in wire Antenna discharge unit(NEC section 810-20) Grounding conductors(NEC section 810-20) Ground clamps Power service grounding(NEC Art250 part H) Ground clamps Electric service equipment NEC : National Electrical code If ...
Page 7 - TABLE OF CONTENTS
ENGLISHENGLISH 5 TABLE OF CONTENTS Preparation Important Safety Instructions .............................................................................. 1 Antenna Safety Instructions .................................................................................4 Chapter 1 Introducing the LCD T...
Page 8 - Package Contents
6 Chapter 1 Introducing the LCD TV Make sure all of the above contents are included in the package. If you are missingany items, please contact the Polaroid customer service department. LCD TV Make sure all of the following contents are included. Power Cord These items are all you need to set up and...
Page 9 - ENGLISH; Setting Up Your LCD TV; Follow the instructions below to install the TV stand:
ENGLISH 7 Chapter 1 Introducing the LCD TV Setting Up Your LCD TV Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: How to install the TV Stand Cover an even stable surface with a soft cloth. Place the LCD TV ...
Page 10 - Insert the 2 batteries supplied in remote control.
8 Chapter 1 Introducing the LCD TV Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suff er damage. Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page 15-18). Connect the AC power cord...
Page 11 - Your LCD TV; Turns the LCD TV on and into standby mode.; Front View
VOL.+ VOL.- CH. CH. MENU INPUT ENGLISH 9 Chapter 1 Introducing the LCD TV Your LCD TV Front/Left /Right Side View and Controls MENU Press once to display the OSD (on screen display), press again to turn the OSD off. VOLUME +- Adjusts the volume up and down. Selects the main-menu item and change valu...
Page 12 - Rear View and Jacks
PC/VGA IN VHF/UHF IN 6 5 7 3 4 2 8 1 AC IN / Power Switch Connects the AC power cord to this socket./ Make sure that this switch is in the ON position (Red LED light willshow on the bottom centre of the T V). 2 AV1 SCART Connect to external equipment with scart socket. This scart input allows audio ...
Page 13 - Your Remote Control; Turns the LCD TV on and into standby mode .; Changes the channels up and down .; Turns on and off the Teletext function.; Cycles through the TV Sound options:
ENGLISH 11 Chapter 1 Introducing the LCD TV Your Remote Control POWER CH LIST SUBTITLE GUIDE SLEEP ATV DTV VOL CH INPUT EXIT MENU OK INFO P MODE 1 2 3 4 5 6 7 8 13 9 10 12 11 POWER Turns the LCD TV on and into standby mode . Mutes and restores your LCD TV sound. AT V/DT V Pressing enter AT V (analog...
Page 14 - Cycles among the diff erent input signal INPUT:; INPUT
12 Chapter 2 Installing the LCD TV POWER CH LIST SUBTITLE GUIDE SLEEP ATV DTV VOL CH INPUT EXIT MENU OK INFO P MODE 14 29 18 17 16 15 14 Pressing once displays a variety of information such as the current channel and the input source. TV AV1(SCART ) AV2(S-VIDEO) AV3(CVBS) AV4(Y Pb Pr) AV5( VGA) AV6(...
Page 15 - Chapter 2; Antenna Connection; Connecting a TV Cable or an Antenna
ENGLISH 13 Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Refer to the owner’s manual of any external equipment to be connected.When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Antenna Connection The...
Page 17 - Cable TV Line
ENGLISH 15 Chapter 2 Installing the LCD TV This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grou...
Page 19 - Rear of TV; Connecting a DVD Player
ENGLISH 17 Chapter 2 Installing the LCD TV Rear of TV Use a Component cable to connect the (Y Pb Pr ) sockets on the DVD player to your LCD T V.Use an audio cable to connect the DVD’s audio sockets to your LCD T V. Connect all power INPUTs before turning on the power switch of the LCD T V or other c...
Page 20 - Connecting a VCR&Video Camera
18 Chapter 2 Installing the LCD TV Use an Audio cable to connect the VCR’s/ the Video Camera’s audio output sockets to your LCD T V.Use a S-Video cable to connect your LCD T V and VCR player/ video camera. Use an A/ V cable to connect the VCR’s/ video camera’s composite output sockets to your LCD T ...
Page 21 - Connecting a TV Cable Box or Satellite Receiver
ENGLISH 19 Chapter 2 Installing the LCD TV Connecting a TV Cable Box or Satellite Receiver Method A(AV4) :Use a Component cable to connect the Y/Pb/Pr sockets on the T V Cable Box to your LCD T V.Use an Audio cable to connect T V cable box’s audio output sockets to LCD T V. Method B(AV2) : Use an Au...
Page 22 - Connecting an Audio Receiver
20 Chapter 2 Installing the LCD TV Use an audio cable to connect the audio receiver’s audio LINE IN sockets to LCD T V ‘s DIGITAL OUT sockets. Press the POWER button to turn on your LCD T V. Connect all power INPUTs before turning on the power switch of the LCD T V or other connected equipments. Rea...
Page 23 - Chapter 3; Selecting a INPUT
ENGLISH 21 Chapter 3 Using the LCD TV Chapter 3 USING THE FEATURES Tuning in the T V channels After connecting an aerial to your LCD T V and connecting the mains cable to the T V and 230VAC mains socket, turn the POWER SWITCH of rear T V on, a red light will show on the front centre panel of the T V...
Page 24 - OSD Menu Operation; OPTION
22 Chapter 3 Using the LCD TV OSD Menu Operation 1 The main menu provides access to the following menus: Video Adjust picture setting such as picture mode, contrast, brightness,sharpness colour and advanced. Audio Adjust sound option and eff ects. Setup Adjust colour standard, sound standard, APS, M...
Page 25 - The VIDEO Settings
ENGLISH 23 Chapter 3 Using the LCD TV OPTION DESCRIPTION Advanced Display Mode Allows you to select the display mode to be Wide, 4:3,Original, Zoom. DCE Allows you to adjust the (Dynamic Contrast Enhancemen) to be off , low, mid, high. Blue Stretch Allows you to adjust the blue stretch. Green Stretc...
Page 26 - Press the
24 Chapter 3 Using the LCD TV OPTION DESCRIPTION Colour Standard Allows you to select the colour standard : AUTO,PAL, SECAM, UK = PAL. Sound Standard Allows you to select the sound standard : DK, BG, I, L/L’. DK PAL D/K, SECAM D/K (East Europe / China ) BG PAL B/G, SECAM B/G (Europe / East Europe / ...
Page 27 - The Preferences Settings
ENGLISH 25 Chapter 3 Using the LCD TV OPTION DESCRIPTION OSD Language : Allows you to select the OSD to be English, French, Spanish, German, Italian, Portugese, Dutch, Polish .Transparency: Allows you to adjust transparency from 0 to15. Blue Screen Allows you to select the blue screen to be off or o...
Page 28 - Chapter 4 Using the DTV OSD Settings; EDIT CHANNEL LIST; CREATE A FAVOURITE LIST
OPTION DESCRIPTION Edit Channel List Lock some channels that are not suited for younger members of the family, skip/add the channel list as you wish . Confi guration Add new channel, set audio language, subtitle language, as you wish. Upgrade the system. View the signal information. Parental Control...
Page 29 - Using the DTV OSD Settings
Using the DTV OSD Settings Channel L i st 1 23456 B B C O N E C B B C C h a n n e l B B C TW O F AV 1 B B C TH R E E B B C N E W S 2 4B B C i L o ck S k ip S k ip A d d A ll S o r t M o v e Exit Exit Screen When you complete the edit, press the EXIT button to quit the favourite channel list menu. Th...
Page 30 - DELETE A FAVOURITE LIST; MODIFY A FAVOURITE LIST
DELETE A FAVOURITE LIST Using the ▲ / ▼ buttons to highlight the list name which you want to delete, then pressing the OK button to delete the favourite list, the pop-up menu will ask if you confi rm or cancel the delete operation. ( Note: The default favourite channel list name isn’t displayed in t...
Page 31 - buttons and press the OK button to start the
Highlight the Confi guration option, then press OK button to enter the selected option. The confi guration menu is displayed on the screen now. CHANNEL INSTALLATIONUse these options If you have moved location or want to rescan for new channels. Press OK button to display the channel installation men...
Page 32 - If you want to install the channels by yourself, using the
30 Chapter 3 Using the LCD TV If you want to install the channels by yourself, using the ▲ / ▼ buttons to highlight the channel installation (manual) option, and press ok to install manually. First you should choose the installation type, then you can see the following menu. Using ◄ / ► to cycle the...
Page 34 - SIGNAL INFORMATION
32 Chapter 3 Using the LCD TV Highlight the system information item in the system parameter menu, pressing OK button to display the system information menu. You can view the system information in this menu, however, you can modify nothing in this menu, Pressing OK button to quit. SIGNAL INFORMATION ...
Page 35 - buttons to cycle
ENGLISH 33 Chapter 3 Using the LCD TV Highlight the parental control line in the parental control menu and use ◄ / ► buttons to cycle through the enable and disable option. Toggle this option to enable, then the following items can be altered. CONFIGURATION MENU If you toggle this option to YES, you...
Page 36 - EPG
34 Chapter 3 Using the LCD TV EPG EPG (Electronic Programme Guide) menu is reached by pressing GUIDE button, quit by pressing GUIDE button again. Current program is highlighted. Use Channel Up/Down ▲ / ▼ buttons to change channels and view the other programmes on the selected channel. Press the Arro...
Page 37 - Troubleshooting
ENGLISH 35 Chapter 3 Using the LCD TV Before consulting service personnel, check the following chart for a possible cause of problem and for a possible solution. Move any infrared equipment away from the TV. T V will not turn on Make sure the power cord is plugged in The batteries in the remote cont...
Page 38 - DISPLAY MODES; Key Features
36 Specifi cations DISPLAY MODES The screen resolution has been optimized during production for the display modes listed below. If the signal from the system equals the standard signal mode, the screen adjusts automatically. If the signal from the system is not equal to the standard signal mode, adj...
Page 39 - ENGLISHENGLISHENGLISH; SPECIFICATIONS; MODEL
ENGLISHENGLISHENGLISH 37 Specifi cations SPECIFICATIONS MODEL TLU-01541C TLU-01941C LCD Panel Panel Size 15.4” TFT LCD 19” TFT LCD Brightness 200 300 Contrast Ratio 400:1 850:1 Max. Resolution 1280x800 1440x900 Input Connector VIDEO 1 1 S-VIDEO 1 1 YPbPr/ AUDIO IN(L/R) 1 1 AUDIO IN(L/R) 1 1 PC/VGA I...
