Polaroid Wireless Surveillance Camera - Manuals

12 13 IP200 Manual 2.1.1.1 Basic Properties Under Basic Properties you will find three options. 1) Device ID 2)System Firmware Version 3) Web UI version (see figure 2.1) Figure 2.1 Device ID. This is the same ID as the one found on the sticker on the bottom of your camera. It is called the MAC ID. I...

16 17 IP200 Manual Figure 2.7 2.3 TO USE IE BROWSER TO GAIN ACCESS Figure 2.8 The first time you login to a camera, it is possible to get the ActiveX prompt with a box around it (as seen in fig. 2.8). In this case click this prompt first and choose Run Add-on. This is telling you to refresh and logi...

18 19 IP200 Manual Figure 2.9 Figure 3.0 NOTE: If live video stream does not come up, but instead a red cross such as this appears on the screen or the screen goes black, follow the following steps: 1. Close your computer’s firewall. 2. Change all the ActiveX settings to enable (including IE BROWSER...

20 21 IP200 Manual Here are some other things you can do if the video still does not appear. 1. Go to your computer’s Start menu and go to Internet Explorer, choose internet attributes to enter, or go directly to your Control Panel, choose Internet Explorer and go to security settings. If the red bo...

22 23 IP200 Manual 2.6 ACTIVEX MODE FOR IE BROWSER ACCESS When you login the camera in ActiveX model you will be asked what level of user you are: Visitor, Operator, or Administrator. Each of these user types come with different levels of authority and usage privileges (see 3.11 for user settings, f...

28 29 IP200 Manual Click to support 15 positions. Begin by rotating camera to the position you want. Then click the preset position icon and a pop-up will appear with 15 position slots. Keep moving camera to desired positions and set one at a time much the same way you’d preset the radio stations in...

32 33 IP200 Manual 3.1.4 Restore Factory Settings Figure 5.5 Clicking on Restore Factory Settings will cause a prompt to pop-up. Select OK and the camera will return to original factory settings and the device will reboot. 3.1.5 Reboot Device Clicking on Reboot the Device will cause a prompt to pop-...

34 35 IP200 Manual 3.4 Wireless LAN Settings Figure 6.1 Figure 6.2 Note: Follow the instruction numbers as they appear in this figure. 1. You must have a wireless router. 2. Your wireless antenna must be installed on camera. 3. If your router is encrypted, you must ascertain and keep the key code. 4...

36 37 IP200 Manual 3.5 ADSL Settings When connect to the Internet through ADSL directly, simply enter ADSL user name and password obtained from ISP. (see figure 6.6 and figure 6.7 below) Figure 6.6 Figure 6.7 3.6 UPnP Settings Click UPnP Settings to choose Using UPnP to Map Port Figure 6.8 All you h...

38 39 IP200 Manual Figure 7.3 In order to do this you must have registered account before hand, have and kept the user name, password, host, and then input the information. NOTE: If your camera default port reads 80, it must be changed to another number, clikck OK, and camera will reboot. Figure 7.4...

46 47 IP200 Manual MSN Settings. NOTE: Before setting MSN, set port forwarding (see DDNS setting instructions for details) Go to MSN settings Page. File in correct user name and password, add MSN buddies, up to ten friends. Once submitted, they will appear in MSN friend’s list. For MSN status, click...

48 49 IP200 Manual authorization selection. SMTP User. Input correct SMTP user; usually his or her full email address. Sometimes the address can be inputted without the suffix and just using the user name. SMTP Password. Input correct password. NOTE: Click Submit before going to TEST. Figure 9.2 If ...

58 59 IP200 Manual 3.22 Sign in mobile phone For monitoring using a mobile phone, you must first choose Sign in mobile phone, login the camera, and the following will window and interface will appear on your computer screen: Figure 11.3 NOTE: Mobile phone does not support ActiveX, therefore, Mobile ...

60 61 IP200 Manual UPnP ALWAYS FAILS? Sometimes your firewall or anti-virus software fails to allow the connection. It is recommended you try port forwarding manually in your router. WHY ISN’T THE SHORTCUT TO IP CAMERA TOOL APPEARING? If you use Windows7 or Vista it may be necessary to check if you ...

62 63 IP200 Manual PROBLEMS WITH NETWORK BANDWIDTH? The picture quality you are getting is subject to several factors: Network bandwidth, PC performance, the number of visitors accessing at one time, or whether your using a switch or a hub for access (use of a switch is recommended for multiple came...