Page 2 - Table Of Contents
1 Table Of Contents Important Safety Instructions--------------------------------------------------2 Product Features ---------------------------------------------------------4 Disc Information -------------------------------------------------------------------5 Front Panel--------------------------...
Page 3 - Important Safety Instructions
- 2 - Important Safety Instructions CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY : Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the two-prong end o...
Page 4 - Copyright Protection
- 3 - Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the produ...
Page 5 - Product Features; Multiple Modes
- 4 - Product Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode Component mode VGA mode TV mode COMPOSITE mode S-VIDEO mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more tha...
Page 6 - Disc Information; Discs Formats Supported By This Player; About Disc Terms; Chapter; Track
- 5 - Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm z The operating method of some DVD discs is specified b...
Page 7 - Front Panel
- 6 - Front Panel 1. 19" color TFT screen 19" color TFT screen clearly show your images. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, COMPOSITE or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH ▲ / ▼ button In the TV mode, press to select channels. I...
Page 8 - Front Panel (Continued)
- 7 - Front Panel (Continued) 7. ■ STOP button Press to stop playback, then press the PLAY button to resume normal playback in DVD mode. Press the STOP button twice to stop playback completely. 8. Eject button Press to eject the disc out. 9. Power button Press to enter or exit the standby mode. 10. ...
Page 9 - Rear Panel
- 8 - Rear Panel 1. Y/Pb/Pr Input Jack (Component) Connected to the Y/Pb/Pr input in Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4. AV and S-Video Input Jacks In the S-VIDEO mode, connected ...
Page 10 - Remote Control; Using the Remote control
- 9 - Remote Control Preparation of Remote Control Softly push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. z Under normal use the battery will l...
Page 11 - Basic Operation
- 10 - Remote Control Basic Operation 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode. 5. VOL +/- button Press to...
Page 13 - System Connections; Connecting to External AV Signal Source
- 12 - System Connections • Do not connect the power cord to the unit until all other connections have been made. • Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on th...
Page 14 - System Connections (Continued)
- 13 - System Connections (Continued) Connecting to External AV Signal Source （ YPbPr ） Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and ...
Page 15 - Connecting to External AV Device (AV Out)
- 14 - System Connections (Continued) Connecting to External AV Device (AV Out) The unit supports audio and video signal input function, it can be connected to the external audio and video device. Use the audio and video cables to connect the AV output Jacks on the rear panel of the unit to the exte...
Page 16 - Connecting to PC
- 15 - System Connections (Continued) Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow these steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the P...
Page 18 - Connecting to TV Antenna
- 17 - System Connections (Continued) Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button of the remote or the unit and select TV as the input mode. After connect...
Page 19 - TV Setup and Operation; Preparations
- 18 - TV Setup and Operation Preparations 1. After making your connections, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is o...
Page 20 - TV Setup and Operation (Continued)
- 19 - TV Setup and Operation (Continued) Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU b...
Page 22 - Parental Setting
- 21 - TV Setup and Operation (Continued) Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menu shown on the right. In the Parental setup menu, pre...
Page 28 - DVD System Setup; General Setup Page
- 27 - DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to select the DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, and Preference. 4. Pre...
Page 29 - DVD System Setup (Continued)
- 28 - DVD System Setup (Continued) OSD Lang Screen Saver Last Memory Media Center The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang . 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select items. 4. Press the ENTER button ag...
Page 32 - Preference Setup
- 31 - DVD System Setup (Continued) Sharpness Brightness Contrast Preference Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the following: 1. Press the direction buttons to select Sharpness. 2. Press ...
Page 34 - DVD Playback Operation; DVD Playback
- 33 - DVD Playback Operation Preparation ： After making all your connections turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode. 2. Please handle the disc with its pri...
Page 35 - DVD Playback Operation (Continued)
- 34 - DVD Playback Operation (Continued) Stop Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this button twice to stop playback completely. Pause Press the PAUSE button once to pause the playback, press it repeatedly to start frame-by-frame playback, press...
Page 36 - CD Playback
- 35 - DVD Playback Operation (Continued) Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you ...
Page 37 - JPEG Playback
- 36 - DVD Playback Operation (Continued) Fast Playback Press the or FWD/REV SCAN button on the remote control to activate fast backward or forward playback. Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. ◆ Some discs do not support the repeat function. Audio Durin...
Page 40 - Other Functions; External AV Input Function; Computer Screen Function
- 39 - Other Functions External AV Input Function The unit has external AV input function. It supports COMPOSITE, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc....
Page 41 - Troubleshooting; SYMPTOM CHECK
- 40 - Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it oc...
Page 42 - Specifications
- 41 - Specifications TFT-LCD Resolution 1440 x 900 TFT-LCD Screen Size 19 inches Power AC100 ～ 240V ， 50/60Hz DC 12V 5A Power Consumption < 60W Dimension 494mm × 184mm × 412mm （ LXWXD ） Weight About 8.26 Kg Ambient Temperature 10~45 ℃ DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTIC...
