Page 2 - Table Of Contents
1 Table Of Contents Important Safety Instruction ----------------------------------------------------------------------2 Product Features ------------------------------------------------------------------ 4 Disc Information ------------------------------------------------------------------- 5 Front ...
Page 3 - Important Safety Instructions
- 2 - Important Safety Instructions CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY : Make sure the supplied power cord is connected to the TV/DVD Combo in the input marked "Power In". Plug th...
Page 4 - Copyright Protection
- 3 - Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product...
Page 5 - Product Features; Multiple Video Input Modes; Advanced Playing Features
- 4 - Product Features This product is designed with a moveable DVD Disc Tray. The Disc Tray can be installed in three different positions. The moveable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. The unit incorporates high-resol...
Page 6 - Disc Information; Discs Formats Supported By This Player; About Disc Terms; Chapter; Track
- 5 - Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm z The operating method of some DVD discs is specified b...
Page 7 - Front Panel; Front and Right View
- 6 - Front Panel Front and Right View 1. 31.5" Color TFT screen 31.5" color TFT screen offers a crystal clear image. 2. SOURCE button Press to enter the Input menu and then use the buttons to select mode: Tuner, AV1 (Composite 1), AV2 (Composite 2), AV3 (Component 1), AV4 (Component), VGA, ...
Page 9 - Rear Panel; Rear View
- 8 - Rear Panel Rear View Open the back cover on the right side of the unit’s rear panel, all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connectors for the Y/Pr(Cr)/Pb(Cb) input in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Ja...
Page 10 - Remote Control; Using Remote control
- 9 - Remote Control Preparation of Remote Control Push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Press the back cover to close it. z Under normal use the battery will last for six mo...
Page 11 - Remote Control Button Functions
- 10 - Remote Control Remote Control Button Functions For TV Operation 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. MTS button In TV mode, press to shift among SAP, Mono or Stereo mode. 4. VOL +/- button Press to increase or decrease the ...
Page 12 - Remote Control (Continued)
- 11 - Remote Control (Continued) Remote Control Button Functions For DVD Operation 1. Play button Press to play the disc in DVD mode. 2. Pause button In DVD mode, press to pause the playback or start step frame by frame playback. Press the PLAY button to resume normal playback. 3. Fast Forward butt...
Page 14 - System Connections; Connecting To External AV Signal Source (AV1)
- 13 - System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the color cables when connecting audio and video cables. • Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal So...
Page 18 - Connecting to External AV Device (AV Out)
- 17 - System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. Special Notes: The features of this A/V equipment allows you to connect to other A/V equipment. Ca...
Page 19 - Connecting to Digital Amplifier
- 18 - System Connections Connecting to Digital Amplifier The unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the below figure:
Page 20 - Connecting to PC
- 19 - System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel. 2. Connect the other end to the PC. 3. Connect o...
Page 21 - Connecting to TV Signal Input; Connecting to Power Supply
- 20 - System Connections(Continued) Connecting to TV Signal Input This unit can be connected to the TV signal input source via the 75 Ω antenna jack on the rear panel. After connection, turn on the power of the unit, press the Input button and select TV mode. Connecting to Power Supply One end is c...
Page 22 - Connecting to Earphone
- 21 - System Connections(Continued) Connecting to Earphone This unit can be connected to an earphone for listening music privately. See the below figure for details: CAUTION: Turn down the volume before connecting the earphone.
Page 23 - Input Source Selecting
- 22 - Input Source Selecting The player incorporates multiple video modes, you can select the video mode according to the input signal. Press the Input button to enter the Input menu, the screen will display as below: In the menu, press the direction button to select the video mode, press the Enter...
Page 24 - System Setup and Operation; Preparations
- 23 - System Setup and Operation Preparations 1. After completing your AV and power connections, press the POWER button to turn on the unit. 2. Press the Input button to display the Input menu, then press the ▲▼ button to select TV and press the Enter button to enter TV mode. You can go on with the...
Page 25 - System Setup and Operation(Continued); Video Setting
- 24 - System Setup and Operation(Continued) Menu Language Press the ▲▼ button to select the Menu Language , press the Enter button to select the menu language you prefer. Video Setting Contrast Press the ▲▼ button to select the Contrast , press the Enter button to enter the adjusting mode, then pre...
Page 28 - Feature Setting
- 27 - System Setup and Operation(Continued) Feature Setting Time Set Mode Press the ▲▼ button to select the Time Set Mode , press the Enter button to select the Auto or Manual. Select Manual, you can set all the items. Time Zone Press the ▲▼ button to select the Time Zone , press the Enter button t...
Page 31 - DVD Player Operation; DVD Playback
- 30 - DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the LCD TV. Press the Input button and select DVD mode, press the Enter button confirm and select DVD mode. 2. Handing the disc with its printed side facing the front of the unit, insert vertically into the disc tra...
Page 32 - DVD Player Operation(Continued)
- 31 - DVD Player Operation(Continued) Pause Press the Pause button once to pause the playback, press it repeatedly to start step-by-step playback, press the Play button to resume normal playback. Previous and Next Press the button to go to the next chapter. Press the button once to return to the be...
Page 33 - CD Playback
- 32 - DVD Player Operation(Continued) CD Playback The player will play all tracks on a CD disc by default. You can use the and (PREV/NEXT skip) buttons, or number buttons to select a track. Stop ■ Press the ■ Stop button once to stop playback and then press Play button to resume. Press this button ...
Page 34 - JPEG Playback
- 33 - DVD Player Operation(Continued) JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development com...
Page 36 - DVD System Setup; General Setup Page
- 35 - DVD System Setup Preparations 1. Install the DVD module onto the LCD TV. 2. Connect to the power supply and turn on the unit. 3. Press the Input button and select DVD, press the Enter button to select DVD mode. 4. Press the Setup button on the remote control to display the settings menu. The ...
Page 37 - DVD System Setup(Continued)
- 36 - DVD System Setup(Continued) OSD Lang Screen Saver Last Memory Media Center The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang . 2. Press the Enter button to enter the setup. 3. Use the direction buttons to select items. 4. Press the Enter button aga...
Page 40 - Preference Setup
- 39 - DVD System Setup(Continued) Sharpness Brightness Contrast Preference Setup Press the Setup button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the following: 1. Press the direction buttons to select Sharpness. 2. Press t...
Page 42 - Troubleshooting; SYMPTOM CHECK
- 41 - Troubleshooting SYMPTOM CHECK ITEM The player does not play. Make sure a disc is loaded in. Make sure disc is not loaded upside down. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred...
Page 43 - Specifications
- 42 - Specifications TFT-LCD Resolution 1366x768 TFT-LCD Screen Size 31.5 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz 20kHz ±2.5dB Audio Signal-to-noise Rate ≥ 85dB Audio distortion+noise ≤ 70dB (1kHz) Channel Separation ≥ 70dB (1kHz) Dynamic Range ≥ 80dB (1kHz) Aud...
