Page 2 - Table of Contents; Product Features
1 Table of Contents Important Safety Instructions------------------------------------------------ Product Features ---------------------------------------------------------------- Front Panel------------------------------------------------------------------------- Rear Panel-------------------------...
Page 3 - Important Safety Instructions
- 2 - Important Safety Instructions POWER SUPPLY : Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the ...
Page 4 - Copyright Protection
- 3 - Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product...
Page 5 - Multiple Mode
- 4 - Product Features This product incorporates LCD display and TV receiver in one system. Multiple Mode Component mode VGA mode TV mode Composite mode S-VIDEO mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. LCD (Liquid...
Page 6 - Front Panel
- 5 - Front Panel 1. 20" color TFT screen 20" color TFT screen clearly show the data. 2. SOURCE button Press to select the modes: Component, VGA, TV, Composite or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH + /CH- button In the TV mode, press to select channels. In setup...
Page 8 - Rear Panel
- 7 - Rear Panel 1. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in Component mode 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. The L/R audio input jacks can also be used in S-Video mode. 3. AV Output Jacks Connected to the external AV input device. 4. S-Video Inp...
Page 9 - Remote Control; Remote Control Drawing
- 8 - Remote Control Remote Control Drawing 1. SOURCE button Press to select the mode Component, VGA, TV, Composite or S-VIDEO. 2. 0~9 Number buttons Press to select numbers 3. LAST button In the TV mode, press to return to the channel last viewed. 4. VOL +/- button Press to increase or decrease the...
Page 10 - Preparation of Remote Control
- 9 - Remote Control Preparation of Remote Control Push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Press the back cover to close it. z Under normal use the battery will last for six mo...
Page 11 - System Connections; Connecting to External AV Signal Source
- 10 - System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the color-corded cables when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the r...
Page 12 - Connecting to External AV Signal Source (YPbPr)
- 11 - System Connections Connecting to External AV Signal Source (YPbPr) Use the audio and video cables to connect the YPbPr (Component) input jacks on the rear panel of the unit to the external AV signal source. After making all AV connections, turn on the power of the unit and external AV signal ...
Page 13 - Connecting to External AV Device(AV Out)
- 12 - System Connections Connecting to External AV Device(AV Out) The unit supports audio and video signal input function, it can be connected to the external audio and video device. Use the audio and video cables to connect the AV output Jacks on the rear panel of the unit to the external AV input...
Page 14 - Connecting to PC
- 13 - System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect ...
Page 15 - Connecting to Headphones
- 14 - System Connections Connecting to Headphones This unit can be connected to an earphone for listening music in private. See below figure for details: After connecting to the earphone, the internal speakers’ output will turn off automatically. Connecting to Power Adapter Power is supplied throug...
Page 16 - Connecting to TV Antenna
- 15 - System Connections Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After making all connections, turn on the power of the unit and press the SOURCE button to shift to TV mode. When channel system is set to Antenna, you can s...
Page 17 - TV Setup and Operation; Preparations
- 16 - directly . * X is the channel number. TV Setup and Operation Preparations 1. After making all connections, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operation...
Page 18 - Audio Setting
- 17 - TV Setup and Operation Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to ret...
Page 20 - Parental Setting
- 19 - TV Setup and Operation Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menu shown on the right. In the Parental setup menu, press the ENTER...
Page 26 - Other Function; External AV Input Function; Computer Screen Function
- 25 - Other Function External AV Input Function The unit has external AV input function. It supports Composite, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, satellite receiver or game player etc. Turn on t...
Page 27 - Troubleshooting; SYMPTOM CHECK
- 26 - Troubleshooting SYMPTOM CHECK ITEM There is no sound. Make sure system connection is correct. Make sure the speakers are not muted. In the TV mode, set the correct sound mode. Nothing display on the LCD. LCD screen is blank. Make sure the unit is turned on and the connections are correct. Mak...
Page 28 - Specifications
- 27 - Specifications TFT-LCD Resolution 800 x 600 TFT-LCD Screen Size 20 inches Power AC100~240V 50/60Hz DC 12V 5A Power Consumption < 60W Dimension 490mm ×478mm ×184mm (LXWXD) Weight About 9.52 Kg Ambient Temperature 10~45 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE "Pola...
