Page 2 - FCC STATEMENT; Notice
EN-1 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Note: Th...
Page 3 - READ THIS FIRST; Trademark Information
EN-2 READ THIS FIRST Trademark Information Microsoft ® and Windows ® are U.S. registered trademarks of Microsoft Corporation. Pentium ® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Inc. SD™ is a trademark. Other names and products may be trademarks or r...
Page 4 - SAFETY INSTRUCTIONS; Warnings; Do not disassemble, change or repair the camera.; Keep the battery out of the reach of children.
EN-3 SAFETY INSTRUCTIONS Please read all Warnings and Cautions before using this product. Warnings If foreign objects or water enter the camera, turn the power off andremove the battery. Continued use may cause personal injury. Please consult our friendlycustomer service. If the camera has been drop...
Page 5 - Cautions; Do not fire the flash close to anyone’s eyes.; Do not subject the LCD display to impact.; Do not wrap the camera or place it in cloth or blankets.; Before moving the camera, disconnect all cords and cables.
EN-4 Cautions Do not fire the flash close to anyone’s eyes. This may cause damage to the person’s eyesight. Do not subject the LCD display to impact. This may damage the glass on the screen or cause the internal fluid to leak.If the internal fluid comes in contact with your eyes, flush with fresh wa...
Page 6 - Notes on Battery Usage
EN-5 Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified battery (7.4V). Avoid extremely cold environments as low temperatures can shorten the battery lifeand reduce camera performance....
Page 8 - CONTENTS
CONTENTS EN-7 8 INTRODUCTION 8 Overview 8 Package Contents 9 GETTING TO KNOW YOUR CAMERA 9 Front View 10 Rear View11 LCD Display 13 GETTING STARTED 13 Preparation14 Installing Polaroid PoGo™ ZINK Photo Paper™ 15 Charging the Battery16 Initial Settings 18 CAPTURE MODE 18 Capturing Images19 Setting th...
Page 9 - INTRODUCTION; Overview; Optional Accessories:
EN-8 INTRODUCTION Overview Congratulations on your purchase of your new Polaroid PoGo™ Instant Digital Camera.This camera is a full featured digital camera with built-in full color printer. Take digitalimages like any other digital camera, review them on this camera, and print just theones you want....
Page 10 - GETTING TO KNOW YOUR CAMERA; Front View
EN-9 GETTING TO KNOW YOUR CAMERA Front View 1. Shutter button2. Power button 3. Speaker4. Self-timer LED5. Flash6. Focus switch7. Lens8. USB terminal9. Microphone10. DC IN 9V terminal 1 2 3 4 10 5 6 7 8 9
Page 11 - Rear View; OK
EN-10 Rear View 1 2 3 4 10 11 5 6 8 7 9 12 13 14 15 16 17 1. LCD display2. Paper tray door latch3. T Zoom in button W Zoom out button 4. Status LED5. Mode button (Image capture andplayback) 6. Menu button 7. c Up button Display button 8. OK Set button 9. Photo exit slot 10. f Right button a Flash mo...
Page 12 - LCD Display; Capture mode
EN-11 LCD Display Capture mode 1. Zoom status2. Flash mode [Blank]Auto Flash [ Y ] Red-eye Reduction [ _ ] Pre-flash [ a ] Always ON [ d ] Flash Off 3. Battery level [ l ] Full battery power [ o ] Medium battery power [ n ] Low battery power [ m ] No battery power 4. Storage media [ r ] Internal mem...
Page 14 - GETTING STARTED; Preparation
EN-13 GETTING STARTED Preparation 1. Attach the camera’s hand strap as shown in the illustration. 2. Open the battery/SD card door.3. Insert the battery in the correct orientation as shown in the illustration. 4. Insert an SD/SDHC memory card (Optional). The camera has 16MB internal memory (4MBava...
Page 15 - Installing Polaroid PoGoTM ZINK Photo Paper
EN-14 Installing Polaroid PoGo™ ZINK Photo Paper ™ Insert the photo paper before printing images.1. Slide the latch on the paper tray door as shown in the illustration. 2. Unwrap the 10-pack of Polaroid PoGo™ ZINK Photo Paper™. 3. Slide the 10-pack of Polaroid PoGo™ ZINK Photo Paper™ into the papert...
Page 16 - Charging the Battery
EN-15 Charging the Battery The AC power adapter charges the battery and also powers the camera. Make surethat the camera is turned off and the battery is inserted before starting. 1. Insert one end of the AC power adapter into the DC IN 9V terminal of the camera.2. Insert the other end of the AC pow...
Page 17 - Initial Settings; Setting the Date and Time
EN-16 Initial Settings Setting the Date and Time The date/time needs to be set when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the battery for anextended period of time. When the date and time information is not displayed on the LCD disp...
Page 18 - Choosing your Language; Formatting the Memory Card or Internal Memory
EN-17 Choosing your Language Specify what language in the menus and messages are to be displayed on the LCD display. 1. Toggle the button to [ ] or [ 7 ]. 2. Press the button. 3. Select [Setup] menu with the f button. 4. Select [Language] with the c / d buttons and press the OK button. 5. Select the...
Page 19 - CAPTURE MODE; Capturing Images
EN-18 CAPTURE MODE Capturing Images Your camera is equipped with a 3.0" full color TFT LCD display to help you composeimages, playback recorded images/video clips or adjust menu settings. 1. Press the button to turn the power on.2. Toggle the button to [ ]. Set the focus switch to [ O ] if you...
Page 20 - Setting the Self-timer
EN-19 Setting the Self-timer This setting allows images to be captured with self-timer. 1. Toggle the e button to select the setting. Each press of the e buttton moves the icon one step through the sequence and displays it on the screen. 2. Compose your image in the LCD display.3. Press the shutte...
Page 21 - Setting the Scene Mode; Setting Manual White Balance
EN-20 Setting the Scene Mode By simply selecting one of the available 19 scene modes, you can capture the imagewith the most appropriate settings. 1. Press the button. 2. Select the desired scene mode with the e / f buttons, and press the OK button. 3. Compose your image and press the shutter button...
Page 22 - Recording a Subject onto an Existing Background Image; Combining Shots of Two People into a Single Image
EN-21 Recording a Subject onto an Existing Background Image Pre-Shot helps you get the background you want, even if you need to ask someone elseto record the image for you. Basically, Pre-Shot is a two-step process.1. Toggle the button to [ ]. a. Press the button. b. Select [Function] with the f but...
Page 23 - VIDEO MODE; Recording Video Clips; Playing Back Video Clips
EN-22 VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels.1. Press the button. 2. Select [Video] with the e / f buttons, and press the OK button. 3. Compose the image.4. Press the shutter button. The recording starts. Pressi...
Page 24 - PLAYBACK MODE; Playback of Still Images
EN-23 PLAYBACK MODE Playback of Still Images You can play back your still images on the LCD display. 1. Toggle the button to [ 7 ]. The last image appears on the screen. 2. The images can be displayed in forward or reverse sequence using the e / f buttons. To view the previous image, press the e...
Page 25 - Attaching Voice Memos; Playing back voice memo
EN-24 Attaching Voice Memos You may record a voice memo for a still image (up to 30 seconds in length). Only onevoice memo per image. 1. Toggle the button to [ 7 ]. The last image appears on the screen. 2. Select the image to which you want to attach the voice memo with the e / f buttons. 3. Press...
Page 26 - Protecting Images; Canceling the Protection
EN-25 Protecting Images To prevent images from accidentally being erased, follow the steps below:1. Toggle the button to [ 7 ]. 2. Select the image that you want to protect with the e / f buttons. 3. Press the button. 4. Select [Protect] with the c / d buttons, and press the OK button. 5. Select [Si...
Page 27 - Erasing Images
EN-26 Erasing Images 1. Toggle the button to [ 7 ]. 2. Select the image you want to erase with the e / f buttons. 3. Press the button.4. Select [Single] or [All] with the c / d buttons, and press the OK button. [Single]: Erases the selected image or the lastimage. [All]: Erases all of the images...
Page 28 - Setting the number of prints
EN-27 INSTANT DIGITAL PRINTER FUNCTIONS AND FEATURES 1. Press the PRINT button. 2. Select [Print] with the c / d buttons, and press the OK button. 3. Select the image that you want to print with the e / f buttons, and press the OK button. By default the print quantity is 1. Press the button to e...
Page 29 - Editing your Images; Cropping Images
EN-28 Editing your Images The camera has features that allow you to perform several photo editing functions onyour images before printing. You can remove red-eye effects, crop images to specificsizes and more. Cropping Images a. After selecting you image in the review mode, press the PRINT button. O...
Page 31 - MENU OPTIONS; Capture Menu; Quality
EN-30 MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. 1. Toggle the button to [ ]. 2. Press the button, and select the [Capture] / [Function] menu with the e / f buttons. 3. Select the desired option with the c / d buttons, and press the OK butto...
Page 33 - Capture Mode; Date Print
EN-32 Capture Mode This sets the recording method at the time of capturing images. LCD Bright. Adjust the brightness level of the LCD display to your desired setting. The LCD becomes brighter with the c button and darker with the d button. The adjust ment range is from -5 to 5. Date Print The date t...
Page 34 - Video Menu
EN-33 Video Menu This menu is for the basic settings to be used when recording video clips. 1. Press the button. 2. Select [Video] with the e / f buttons, and press the OK button. 3. Press the button, and select the [Capture] / [Function] menu with the e / f buttons. 4. Select the desired option wit...
Page 35 - Playback Menu
EN-34 Playback Menu In the [ 7 ] mode, choose which settings are to be used for playback. 1. Toggle the button to [ 7 ]. 2. Press the button. 3. Select the desired option with the c / d buttons, and press the OK button to enter its respective menu. 4. Select the desired setting with the c / d button...
Page 36 - Setup Menu
EN-35 Setup Menu Set your camera’s operating environment. 1. Press the button, and select the [Setup] menu with the f button. 2. Select the desired option item with the c / d buttons, and press the OK button to enter its respective menu. 3. Select the desired setting with the c / d buttons, and pres...
Page 37 - System Requirement; Downloading Your Files
EN-36 TRANSFERRING FILES TO YOUR COMPUTER System Requirement Downloading Your Files 1. Connect one end of the USB cable to an available USB port on your computer. 2. Connect the other end of the USB cable to the USB terminal on the camera. 3. Turn on your camera.4. Select [PC] using the c / d button...
Page 38 - USING THE CAMERA AS A PC CAMERA
EN-37 USING THE CAMERA AS A PC CAMERA Your camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family. To use the camera for videoconferencing, your computer system must include the items as below: Microphone...
Page 39 - EDITING SOFTWARE INSTALLATION
EN-38 EDITING SOFTWARE INSTALLATION There are 2 types of software that are included on the CD-ROM: MediaImpression - manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo, video, and music files.Create your own movies or photo slide...
Page 40 - SPECIFICATIONS; Item
EN-39 SPECIFICATIONS * Design and specifications are subject to change without notice. Item Description Image sensor 1/2.5” CMOS sensor (5.0 megapixels) Image resolution Still image 7 MB (FW interpolation), 5 MB, 3 MB, 1.3 MB, 0.3 MB (VGA) Video clip640 x 480 (30 fps), 320 x 240 (30 fps) LCD display...
Page 41 - APPENDIX; Possible Number of Shots
EN-40 APPENDIX Possible Number of Shots Possible number of shots (still image) The table shows the approximate shots that you can capture at each setting based on the capacity of the internal memory and the SD/SDHC memory card. Possible recording time / sec (video clip) * We recommend a memory card ...
Page 42 - Troubleshooting
EN-41 Troubleshooting Refer to the symptoms and solutions listed below before sending the camera for repairs. If the problem persists, contact your local reseller or service center. Symptom Cause Solutions / Corrective Actions The camera does not come on. The battery is not inserted. Insert the batt...
Page 43 - Problem
EN-42 Troubleshooting when using the camera’s built-in printer: Problem Solution Do not: Do: The photo has streaks. Send another image to be printed. 1. Turn off the camera.2. Open the paper tray door and remove the photo paper. 3. Place one sheet of photo paper upside down (with watermark facing up...
Page 44 - Quick Printing
EN-43 Quick Printing Images can also be printed to an external printer. 1. Connect one end of the USB cable to your camera. 2. Connect the other end of the USB cable to the USB port on the printer. 3. Turn on your camera.4. The [USB] screen is displayed. Select [Quick Print] with the c / d buttons, ...
Page 45 - Connecting to a PictBridge Compliant Printer; Connecting the camera to the printer
EN-44 Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connectingthe digital still camera directly to the PictBridge-compatible printer without using acomputer. Connecting the camera to the printer 1. Connect one end of the USB...
Page 46 - PRINTING
EN-45 3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. Select the image that you want to print withthe e / f buttons. Select the [Num of Prints] (up to 99) with the c / d buttons. After selecting the desired image and printingnumber, press th...
Page 47 - Default Settings
EN-46 Default Settings The default language for the LCD screen may vary with different countries and regions. Camera Mode Menu Item Default Value Capture mode EV 0 Size 5M Quality Fine Sharpness Normal Saturation Normal White Balance Auto ISO Auto Metering Center Color Normal Capture Mode Single L...
