Page 2 - Table of Contents
- - 1 Table of Contents Important Safety Instructions ................................................................................ 2 Accessory List ......................................................................................................... 4 Disc Information ..........................
Page 3 - Important Safety Instructions
- - 2 Important Safety Instructions CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player (if equipped) or back of the TV in the slot marked “Powe...
Page 5 - Accessory List; ITEM; Power Supply Cord; Operation Manual
- - 4 Accessory List ITEM NAME QTY Remote Control (optional) 1 Batteries for Remote Control (optional) 2 Power Supply Cord (Cannot be removed from TVs 19” or smaller) 1 Operation Manual 1 Note: ¾ Accessories and their numbers are subject to modification without prior notice.
Page 6 - Discs Supported; About Disc Terms
- - 5 Disc Information (for systems equipped with DVD Players) Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio & Video (Active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm z The software maker specifies t...
Page 7 - View of Unit
- - 6 View of Unit Front and Right Side Panel (including optional DVD player) 1. Color TFT screen 2. INPUT button Press repeatedly to toggle between input sources: TV, AV1 (Composite1), AV2 (Composite 2), AV3 (Component1), AV4 (Component2), VGA , HDMI or DVD mode. 3. MENU button Press to enter or ex...
Page 8 - Rear Panel
- - 7 View of Unit Rear Panel Open the back cover on the right side of the unit’s rear panel and all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) (Component) and L/R audio Input Jacks Connect Y/Pr(Cr)/Pb(Cb) (Component) input source in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(...
Page 10 - Remote Control; For TV Operation
- - 9 Remote Control For TV Operation 1. POWER button Press to enter or exit standby mode. 2. 0~9 Number buttons Press to select numbers. 3. MTS button Press repeatedly to select SAP, Mono or Stereo mode in TV mode. 4. VOL +/- button Press to increase or decrease the volume. 5. MUTE button Press to ...
Page 12 - For DVD Operation (for models so equipped)
- - 11 Remote Control (Continued) For DVD Operation (for models so equipped) 1. Play button Press to play the disc in DVD mode. 2. Pause button During disc playback, press to pause playback or start step frame-by-frame playback. Press the PLAY button to resume normal playback. 3. button Press to act...
Page 14 - Preparation
- - 13 Remote Control Preparation Softly push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), ensuring the polarity matches the marks inside the compartment. Softly press the back cover to close it. z Remove batteries when the remote is not in use for a long ti...
Page 15 - System Connections; Connecting an External AV Signal Source (AV1)
- - 14 System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe and correctly connect colored cables when connecting audio and video cables. • Before connecting, open the cover on the right side of the unit’s rear panel. • If you wall m...
Page 16 - Connecting an External AV Signal Source (AV2)
- - 15 System Connections Connecting an External AV Signal Source (AV2) Use audio cables to connect an external signal source to the AV2 (Composite 2) audio input jacks on the jack panel of the unit. Use either composite video or S-Video cables for the video connection to the input jack on the jack ...
Page 17 - Connecting External an AV Signal Source
- - 16 System Connections Connecting External an AV Signal Source （ AV3/AV4 ） Use AV cables to connect an external AV signal source to the Y/Pb (Cb) /Pr (Cr) (Component) input jacks on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source and p...
Page 19 - Connecting a Digital Amplifier
- - 18 System Connections Connecting a Digital Amplifier This unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the figure below:
Page 20 - Connecting a PC
- - 19 System Connections Connecting a PC Follow the steps and figure below to connect PC to the unit. 1. Connect one end of the VGA cable to the VGA input jack on the jack panel of the unit and the other end to the PC VGA output. 2. Connect one end of the audio cables to the PC audio input jack on ...
Page 21 - Connecting a TV Signal Source
- - 20 System Connections Connecting a TV Signal Source Connect a TV signal source (antenna or analog cable) to the RF (TV) jack on the jack panel of the unit. After connection, turn on the power of the unit and use the Input button to select TV mode. Connecting the Power Supply Connect one end of p...
Page 22 - Connecting Earphones
- - 21 System Connections Connecting Earphones Connect earphones to the earphone jack on the jack panel of the unit for listening. When earphones are connected, the television will automatically mute internal speaker output. Note: Excessively loud volume could damage your hearing. Please turn down t...
Page 23 - Input Source Selection
- - 22 Input Source Selection The unit incorporates multiple video modes which can be selected via the Input button on the television or remote. Press the Input button to enter Input menu. The screen will display as shown below: On the input menu, press the button to select the desired video mode an...
Page 24 - System Setup; Setup Settings
- - 23 System Setup Preparation 1. After connection, press the POWER button to turn on the unit. 2. Use the Input button to select TV mode and follow the procedures below. Setup Settings Tuning Band Press the ▲▼ button to select Tuning Band and press the Enter button to setup. DTV Signal Press the ▲...
Page 27 - Audio Settings
- - 26 System Setup Audio Settings Audio Language Press the ▲▼ button to select the Audio Language and press the Enter button to select the desired item if the program contains multi-audio languages. TruBass Press the ▲▼ button to select TruBass and press the Enter button to enter the menu as shown....
Page 28 - Feature Settings
- - 27 System Setup Feature Settings Time Set Mode Press the ▲▼ button to select Time Set Mode and press the ◄ ► button to select Auto or Manual. Time Day Press the ▲▼ button to select Time Day and press the ◄ or ► button to select time day. Time Press the ▲▼ button to select Time and press the ◄ or...
Page 31 - Special Features of the DVD Module
- - 30 Special Features of the DVD Module Your TV may have come equipped with an optional removable DVD player. The television is designed to allow simultaneous use of two different modules; the DVD player can be installed in three different positions. Please follow the procedures below to remove or...
Page 32 - DVD Playback Operation; DVD Playback
- - 31 DVD Playback Operation Preparation 1. Install the DVD module into the TV as detailed above. 2. Connect the module to the power supply and press the POWER button to turn on the unit. 3. Use the Input button on the TV or remote to select DVD mode. 4. Gently insert the disc, with the label side ...
Page 33 - DVD Playback Operation (Continued)
- - 32 DVD Playback Operation (Continued) Pause During playback, press the Pause button once to pause the playback; press it repeatedly to start step-by-step playback and press the Play button to resume normal playback. Previous and Next During playback, press the button to go to the next chapter. P...
Page 34 - CD Playback
- - 33 DVD Playback Operation (Continued) Various Camera Angles The movies on some discs have been recorded from various camera positions, which allow scene viewing from different perspectives. When playing a disc containing various camera angles, the camera symbol appears on the screen. Press the A...
Page 35 - JPEG Playback
- - 34 DVD Playback Operation (Continued) JPEG Playback JPEG is a common format for pictures and digital photographs. The DVD module is capable of displaying JPEG images stored on a DVD or CD disc. Play After loading a JPEG disc, a root menu appears on the screen. Use the Enter button and the direct...
Page 36 - USB and SD/MS/MMC Card Function
- - 35 USB and SD/MS/MMC Card Function Preparation In DVD mode, connect an external USB device to the USB port or insert a SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the optional DVD module. Note ¾ Make sure that files are stored on the USB device or the SD/MS/MMC card before c...
Page 37 - DVD System Setup
- - 36 DVD System Setup Preparation 1. In DVD mode, press the Setup button to open DVD setup menu. 2. Press the button to select the Setup menu 3. Press the Setup button again to exit the DVD setup menu. General Setup Page Press the Setup button to enter the General Setup Page, as shown: TV Display ...
Page 39 - Audio Setup Page; Dolby Digital Setup
- - 38 DVD System Setup Audio Setup Page Press the Setup button to enter the General Setup Page and then press the button to select Audio Setup Page, as shown below: Dolby Digital Setup On Audio Setup Page, press the button to select Dolby Digital Setup and press the Enter button to enter the setup,...
Page 40 - HDCD Setup; Video Setup
- - 39 DVD System Setup Dynamic HDCD Setup On Audio Setup Page, press the button to select HDCD Setup and press the Enter button to enter the setup, as shown below: Video Setup Press the Setup button to enter the General Setup Page and then press the button to select Video Setup Page, as shown: 1. P...
Page 41 - HD Mode; Video Quality Setup
- - 40 DVD System Setup HD Mode On Video Setup Page, press the button to select HD Mode and press the Enter button to enter the setup, as shown: Video Quality Setup On Video Setup Page, press the button to select Quality and press the Enter button to enter the setup, as shown: Sharpness 1. Within th...
Page 42 - Preference Setup
- - 41 DVD System Setup Brightness Contrast Preference Setup Press the Setup button to enter the General Setup Page and then press the button to select the Preference Page, as shown: Audio 1. Press the button to select Brightness . 2. Press the Enter button to enter the setup. 3. Press the button to...
Page 44 - Use of the Wall Mount; Wall Mount Installation:; Stand Reinstallation:
- - 43 Use of the Wall Mount Your TV may have come equipped with an optional wall mount, which can be attached to the TV through use of the mounting holes on the back of the system. We recommend removing the TV stand prior to wall mounting the TV. Please refer to the figure and the procedure below. ...
Page 45 - Troubleshooting
- - 44 Troubleshooting Note: if a hospitality VOD system is in use, please ensure all VOD functionality is working properly, contacting the VOD provider’s technical support if necessary, prior to following the television troubleshooting procedures below. Many simple problems can quickly be solved us...
Page 46 - Specifications
- - 45 Specifications Model 26” 32” 37” 40” 46” TFT-LCD Resolution 1366x768 1366x768 1366x768 1366x768 1366x768 TFT-LCD Screen Size 26 inches 31.5 inches 37 inches 40 inches 46 inches Laser Wavelength 780/650 nm 780/650 nm 780/650 nm 780/650 nm 780/650 nm Video System NTSC NTSC NTSC NTSC NTSC Freque...
Page 47 - Warranty
- - 46 Warranty Warranty and service terms for your account are detailed in your Master Purchase Agreement. For warranty or service-related issues or concerns, please contact Polaroid at http://www.polaroid.com/service or by phone at 1-888-779-6779.
