Page 2 - TABLE OF CONTENTS; Page; FOREWORD
TABLE OF CONTENTS 2 Page General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3C ongratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 3 - GENERAL SAFETY; KNOWLEDGE OF WARNINGS AND CAUTIONS; and summarized below .; Do Not Attempt Internal Service.
3 GENERAL SAFETY This equipment has been designed to minimize exposure of personnel to hazards . While the Polaris System is designed for safe operation, certain precautions must be observed . Use of the Polaris System not in conformance with the instructions specified in this manual may result in p...
Page 4 - The Polaris
GENERAL SAFETY 4 CONGRATULATIONS Congratulations on your purchase of the Polaris Universal Intraoral Video Camera System, the latest camera in the dental video imaging product line from Air Techniques, a leading manufacturer of dental equipment since 1962 . The Polaris Universal Intraoral Video Came...
Page 5 - Incorrect Usage; caused as a result of incorrect usage . The operator bears all risks .; IMPORTANT INFORMATION; UNPACKING AND INSPECTION; your Air Techniques authorized dealer .
5 General Notes. All instructions in this manual form an integral part of the unit . They must be kept close to the unit and in readiness whenever required . Precise observance of these instructions is a pre-condition for use of the unit for the intended purpose and for its correct operation . Thi...
Page 6 - BOX CONTENTS
6 The Polaris System is comprised of a Camera Handpiece and Control Module . Each is boxed separately along with associated accessories and is available individually by their selling numbers D7520 and D7560 respectively . When shipped together as a complete Polaris System, the separate boxes are pac...
Page 7 - Camera Handpiece -; The Camera Handpiece is extremely lightweight with
7 KEY PARTS IDENTIFICATION COMPONENT DESCRIPTION The Polaris System is an intraoral camera system designed for dental applications that consists of the Camera Handpiece with holder, Control Module, Power Supply Adapter and associated cables as described below . NOTE: Air Techniques’ VISIX Imaging So...
Page 8 - COMPONENT DESCRIPTION; Camera Covers Sample Pack -
8 COMPONENT DESCRIPTION Camera Covers Sample Pack - Provides a sample quantity of 20 disposable camera covers used as an effective barrier preventing any infection hazard to the patient . Polaris Handpiece Holder - The Polaris Handpiece Holder can be fastened in a convenient location for safe storag...
Page 9 - PRE-INSTALLATION INFORMATION; Minimum Computer System Requirements -
9 PRE-INSTALLATION INFORMATION IMPORTANT: When operating the Polaris System connected to the USB 2.0 port on a Computer System, the computer must also be loaded with Air Techniques Authorized Twain or DirectX 9 compliant streaming video software application such as VISIX. Contact your dealer for ava...
Page 10 - Polaris Camera Handpiece; 30o Swivel Lens Head Adjustment -; Button 1; HANDPIECE FUNCTIONS
10 Polaris Camera Handpiece IMPORTANT: Use care when adjusting the handpiece lens head. The swivel lens head turns only 165º left or right from the center point. Forcing the head past the 165º limit will damage the device. Prior to rotating the lens, slide the Camera Cover about 1/2 to 3/4 inches up...
Page 11 - CONTROL MODULE FUNCTIONS
11 CAMERA Connector A 10 pin connector socket that accepts con- nection of the keyed 10-pin quick disconnect plug end from the multi-conductor Handpiece cable . Makes connection between the Camera Handpiece and Control Module to provide power, video output and control for the camera . Power Indicato...
Page 12 - The diagram below shows the possible interconnections; SYSTEM INTERCONNECTIONS; Control Module Location -; Locate the Polaris Control Module on a table; INSTALLATION; System Interconnection
12 Polaris System - The diagram below shows the possible interconnections for the Polaris System . The heavy solid connection lines designate the typical operating configuration (connected to a computer system) . The dashed line shows the optional connection to a video monitor, while the lighter sol...
Page 13 - Camera Cable Connection -; Camera Handpiece Connection.; Polaris Handpiece Holder with Chair-side Adapter -
13 Camera Cable Connection - Carefully connect the supplied Camera Handpiece Cable between the Camera Handpiece and Control Module as follows: Do not twist or turn the cable connectors. The handpiece Cable connectors are keyed and mate straight on with the associated Camera handpiece and Control Mod...
Page 14 - USB Digital Video/Button Control Connection Options -; USB Cable Connection Directly to PC; USB Cable Connection via Hub
14 INSTALLATION USB Digital Video/Button Control Connection Options - Refer to corresponding figure below and perform the following procedure to connect the USB 2 .0 High Speed output of the Polaris Control Module to the associated PC computer as desired . 1 . Connecting Directly to PC . Connect the...
Page 15 - Video Connection Options -; Make connections as required by individual; Optional Video Connections; The Control Module receives
15 Video Connection Options - Make connections as required by individual office equipment to connect the Polaris System video outputs . 1 . S-Video . Using an optional 6-foot S-Video, 4-pin Mini DIN cable, connect between the S-VIDEO connector located on the rear of the Control Module and the associ...
Page 16 - Polaris Handpiece Storing; USB Device Driver Installation -; Connecting Handpiece
16 INSTALLATION The Polaris Camera Handpiece quickly detaches from the Handpiece Cable and is easily carried among patient operatories for use with additional Polaris Camera System Control Modules . Refer to the corresponding illustrations and transport the Camera Handpiece as follows: 1 . Retract c...
Page 17 - Disposable Camera Cover Installation -; Install a new camera cover; Camera Cover Installation
17 1 . Remove the Camera Handpiece from the holder . 2 . Insert the Camera Handpiece tip between the second and third layers (between the outer paper and plastic layers) with the camera/light source facing towards the paper layer . See A . 3 . Push the Camera Handpiece completely in until the tip is...
Page 18 - ACTIVATION; Computer-Connected System Operation -; SYSTEM OPERATION
18 Power Turn On- Perform the following procedure as necessary to turn the power on for operation of the Polaris System . 1 . Review the Installation Section as needed and make sure the Polaris System components are setup and connected for the applicable operating con- figuration . 2 . If connecting...
Page 20 - DIAGNOSTIC PROCEDURES; USB Video Diagnostic -; Properties
20 DIAGNOSTIC PROCEDURES USB Video Diagnostic - If live video is not displayed on the PC monitor of the Polaris System when the imaging software application is running, there could be a problem with the settings in the software application or with the handpiece. Perform the following USB Video Diagn...
Page 21 - INSPECTION AND CLEANING; MAINTENANCE
21 INSPECTION AND CLEANING Perform the following inspection and cleaning procedures periodically as a preventive maintenance measure to keep the Polaris System in optimal condition resulting in trouble-free operation producing crisp, clear images . Inspection - Routinely inspect each component of th...
Page 22 - Dimensions
22 SPECIFICATIONS External Adapter Voltage input: 100-240 Volts ±10% Frequency: 50/60 Hz Voltage Output: 12 VDC (Optional adapter configurations available for international outlet usage .)Power Consumption: 7 .2 watts Video Outputs: S-Video, Composite Video, High Speed USB 2 .0 Sensor: ¼ Inch CCD Fo...
Page 23 - Polaris Camera System; ACCESSORIES
23 The following lists the ordering number and description for accessory com-ponents available to maintain and expand the Polaris System to meet your professional needs .Contact your Air Techniques Dealer for information . Polaris Camera System Order Number Description D7500 Complete Polaris Univers...
Page 24 - VISIX IMAGING SOFTWARE
24 Consider VISIX, our new comprehensive digital imaging software application, providing seamless integration with our digital imaging suite; the Accent CCD Intraoral Sensor, ScanX PSP Systems and Polaris Intraoral Cameras . Key Features. Easy to learn . Simple to use . Acquire, mount, view an...
Page 25 - WARRANTY; warranty registration; link and complete; ON-LINE WARRANTY REGISTRATION
25 WARRANTY Quickly and easily register the Polaris Camera on-line . Just have your product model and serial numbers available . Then go to the Air Techniques web site, www.airtechniques.com , click the warranty registration link and complete the registration form . This on-line registration ensures...
Page 26 - NOTES
