Page 2 - Table of contents; General Information
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 1 Table of contents 1. General Information ......................................................................................................... 3 2. Safety Precautions ........................................................................................
Page 3 - Programming Remote Control
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 2 Channel Scan .................................................................................................................... 39 Auto Scan.....................................................................................................................
Page 4 - General Information; Important Information; CAUTION; Risk of electric
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 3 General Information This 3 7 ” wide active matrix TFT (thin film transistor) liquid crystal monitor is designed for use as a stand alone TV as well as a display device for video electronics appliances and personal computers. Important Information Warning: ...
Page 5 - Thank You for Choosing This Product
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 4 Thank You for Choosing This Product Your new LCD TV was built utilizing the latest advancements in television technology. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
Page 6 - Safety Precautions; Antenna lead in wire
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 5 Safety Precautions 1. Cleaning: Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. 2. Water and moisture: Do not use the product near water or areas o...
Page 7 - Stand: Do not place the product on an unstable
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 6 6. Lamp(s) Contain Mercury. Dispose According to Local, State, Federal Laws. 7. Stand: Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious persona...
Page 8 - Features; List of Features; Automatic channel program for up to 125 channels.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 7 Features List of Features Your TV is designed with the latest technology and is a high-performance unit that includes the following special features: ¾ Multiple input sources including Antenna terminal for Analog / Digital, D-SUB connector, HDMI connector,...
Page 9 - Ports; Component IN S-Video IN Composite IN Video & Audio OUT; Interface I; AV L R; Interface II VIDEO BOX
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 8 Ports Component IN S-Video IN Composite IN Video & Audio OUT HDMI D-SUB AUDIO IN Interface I Y1 Pb1 Pr1 L1 R1 SV1 L1 R1 AV1 L1 R1 Y2 Pb2 Pr2 L2 R2 SV2 L2 R2 AV2 L2 R2 AV L R Interface II VIDEO BOX RF IN ANALOG TV RF IN DIGITAL TV AC POWER SOCKET VHF / ...
Page 10 - Control Buttons; Main Power Switch; switch to; MAIN POWER; switch is located at the bottom-left back of the LCD display (near by; Function Key; display the main menu.; increase or decrease the volume.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 9 Control Buttons Main Power Switch Before operating the LCD display or remote control, users must press MAIN POWER switch to ON . The MAIN POWER switch is located at the bottom-left back of the LCD display (near by Power Inlet). Function Key These buttons c...
Page 11 - Accessories; User’s manual
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 10 Accessories User’s manual Remote control & Batteries (AAA x2) Power Cord USER’S MANUAL LCD - TV
Page 12 - Remote Control
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 11 Remote Control SELECT TV RATING
Page 13 - Summary of Control Button
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 12 Summary of Control Button P P o o w w e e r r c c o o n n t t r r o o l l POWER button Turn the TV on or off Selecting the primary signal source TV button Switch to TV mode AV/SV button Switch to AV and S-Video (composite and Y/C mode) CV button Switch to...
Page 14 - VIDEO DEVICE; Connections & Applications; * How to connecting Video Device via HDMI ?; Pr L; PC
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 13 VIDEO DEVICE (ex. DVD Player or Set-top Box…) Connections & Applications * How to connecting Video Device via HDMI ? This can be applied only if there is the HDMI Output connector on the external device. * How to connecting Video Device via D-SUB ? No...
Page 15 - * How to connecting Video Device via DVI –HDMI ?; VIDEO
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 14 VIDEO DEVICE (ex. DVD Player or Set-top Box…) * How to connecting Video Device via DVI –HDMI ? This can be applied only if there is the HDMI Output connector on the external device. 1. Connect a DVI-to-HDMI cable or DVI-HDMI adapter between the HDMI/DVI c...
Page 16 - * How to connecting Video Device via general cable ?; Component IN S-Video IN Composite IN Video & Audio Out
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 15 * How to connecting Video Device via general cable ? Interface II VIDEO BOX RF IN ANALOG TV Component IN S-Video IN Composite IN Video & Audio Out Y1 Pb1 Pr1 L1 R1 SV1 L1 R1 AV1 L1 R1 Y2 Pb2 Pr2 L2 R2 SV2 L2 R2 AV2 L2 R2 AV L R Subwoofer S/PDIF This T...
Page 17 - Controls & Adjustment; A. General Adjustment; Turning the LCD TV On and Off; Viewing the Menus and On-Screen Displays; Power; MENU
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 16 Controls & Adjustment A. General Adjustment Turning the LCD TV On and Off Plug the power cable into the AC-in socket located on the left rear of the LCD TV. Plug the other end into an electrical socket. Press the main POWER button located on the back ...
Page 18 - Switching Language Modes; Menu; OSD; Exit
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 17 Switching PC/HD / Video / S-Video/ TV / Component Modes 1. Turn on the power. 2. Select an input source as described below: TV PC/HD AV/SV CV DTV/Menu Switching Language Modes 1. Press the Menu button to display OSD from the main menu. 2. Press the △ or ▽...
Page 19 - Setting the Sleep Timer; Adjusting the Volume; Using Volume Control; Mute; SLEEP
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 18 Setting the Sleep Timer You can set the Sleep Timer to automatically turn off the LCD TV. 1. Press the SLEEP button to display the Sleep Timer screen. 2. Press the SLEEP button to set the sleep timer (in 10 minute increments). Adjusting the Volume Using V...
Page 20 - B. PC Mode Adjustment; Adjusting the Contrast & Black light Settings; ANALOG INPUT; CONTROL
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 19 B. PC Mode Adjustment Adjusting the Contrast & Black light Settings Each viewing mode supports separate adjustments for black light and contrast levels. PC mode is best viewed with middle black light and contrast levels as compared to other modes. Adj...
Page 21 - Adjusting Sound Settings; SOUND
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 20 Adjusting Sound Settings 1. Press the Menu button to display SOUND from the main menu. 2. Press the △ or ▽ button to access SOUND sub-menu. 3. Press the ◁ or ▷ button to select the settings. 4. Press the Exit button to exit from the menu or press the Menu...
Page 23 - MANUAL: POP
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 22 MANUAL: POP : JAZZ : VOICE: ROCK: CLASSIC:
Page 24 - PIP
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 23 Viewing Picture-in-Picture ( PIP) PIP : While viewing content on the main display, you have the option to select a secondary signal as a sub-display in a picture in picture window. This feature allows you to watch two video sources simultaneously. Activat...
Page 25 - PIP Function; POP: Show PIP side by side with the main source.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 24 PIP Function Control Key z POP: Show PIP side by side with the main source. Note: Numbers of Video source cannot be displayed at the same time.( refer to the Table on page25 ) 5. Press the or and △ ▽ ▷ button to access MULTI PICTURE option. CONTROL BUTTON...
Page 27 - C. General TV Mode Adjustment; Adjusting the TV settings; Press the TV button to set the main display to TV; TV; Sound Options
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 26 C. General TV Mode Adjustment Adjusting the TV settings 1. Press the TV button to set the main display to TV mode. Press the Menu button to display TV CHANNEL from the main menu. Sound Options Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on t...
Page 28 - Adjusting Picture Settings; PICTURE; PICTURE MODE; or ▽
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 27 Adjusting Picture Settings 1. Press the Menu button to display PICTURE from the main menu. Then press the △ or ▽ button to select PICTURE MODE option. 2. Press the ◁ or ▷ button to enter the USER menu. 3. Press the △ or ▽ button to select the desired item...
Page 29 - Memorizing Channels; Selecting the TV Signal Source; SOURCE
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 28 Memorizing Channels Your TV can memorize and store all of the available channels for both standard broadcast (antenna) and cable channels. After the available channels are memorized press the △ or ▽ button to view stored channels. You can also view any ch...
Page 30 - TV CHANNEL
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 29 Storing Channels (Automatic Method) 1. Press the Menu bottom to display TV CHANNEL from the main menu .Then press the ▽ button to select the AUTO SCAN option. 2. Press the ▷ button to run through all of the available channels and store them in memory. It ...
Page 31 - Changing Channels; Using the Channel Buttons
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 30 Changing Channels This LCD TV turner provides the ability to display up to 125 channels (1 to 125). To select a channel, enter the channel number using 1 to 3 digit numbers. Using the Channel Buttons 1. Press the channel (+ ) or channel (-) button to chan...
Page 32 - Using Parent Control; The
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 31 Using Parent Control The Parent Control feature allows you to block channels from being viewed unless an unlock PIN code is correctly entered. Before Parent Control restrictions can be utilized, you must first create a PIN number. 1. Press the TV button ....
Page 33 - Setting Up Your Personal ID Number (PIN); CHANGE
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 32 5. Enter your 4-digit PIN when you have finished entering the PIN. If the PIN is not correct, main menu will appear again. 6. After entering a valid PIN number, the all of Parent Control sub options will appear. Press the △ or ▽ button to select the sub-m...
Page 34 - button to enter the; BLOCKING; menu will be on the; “OK”; will be on the
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 33 2. Press the ▷ button to enter the BLOCKING PASSWORD menu. 3. Enter your new 4-digit PIN XXXX,and the BLOCKING CONFIRM menu will be on the screen. 4. Enter the 4-digit PIN the same as step3 XXXX again, IF the PIN is correct, “OK” will be on the screen. If...
Page 35 - PARENT CONTROL
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 34 . 5. When you have finished entering the PIN, new setting to be operation. How to Enable / Disable Parent Control Under the PARENT CONTROL sub-options: 1. Press the △ or ▽ button to select the V-CHIP . 2. Press the ◁ or ▷ button to select the V-CHIP ON or...
Page 36 - OK; ALL
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 35 4. Press the ▷ button to enter the TV-RATING , Rating menu will appear. 5. Press the OK key to select Content BLOCK or UNBLOCK. 6. Press the Exit or Menu buttons to jump-out the setting menu. TV-Rating function is operation. If the channel is set to a res...
Page 37 - Setting up restrictions using the “BLOCKING MOVIE” function.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 36 Setting up restrictions using the “BLOCKING MOVIE” function. The MOVIE-RATING option utilizes the Motion Picture Association of America (MPAA) ratings system for determining blocked programming. When the parent control lock is enabled, the TV will automat...
Page 38 - Child Lock; FUNCTION
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 37 If the channel is set to a restricted channel, the parent control will automatically block it, and the BLOCK menu will appear: Child Lock 1. Press the TV button . 2. Press the Menu button to display FUNCTION from the main menu. 3. Press the ▽ button to se...
Page 39 - CC Button; Viewing Closed Captions
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 38 CC Button Viewing Closed Captions This LCD TV has the ability to decode and display closed caption content if supported by the program. These captions are usually used for the hearing impaired or for foreign language translations. Most VCR's can record th...
Page 40 - Channel Scan; be scanned and memorized.; Initial Screen; you will see
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 39 D. DTV System Channel Scan Before you can use any of the channel buttons ( CH + / -, Fav.Ch ), the available channels must first be scanned and memorized. Initial Screen The first time the receiver is powered on, you will see the message as below. As the ...
Page 41 - Auto Scan; AUTO SCAN
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 40 Auto Scan To automatically scan your channels, follow these steps: 1. Press the Menu button to display DTV-CHANNEL from the main menu ,and then press the △ or ▽ button to select AUTO SCAN option. 2. Press the ◁ or ▷ button to enter the Auto Scan menu. 3. ...
Page 42 - Once the digital TV signal is scanned, the channel
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 41 4. Once the digital TV signal is scanned, the channel number and the program name are shown on the “Scan List”. 5. No channel is found. You will see the message as below: 6. Press the Menu button to exit the screen. 0
Page 43 - Manual Scan; MANUAL SCAN; Enter
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 42 Manual Scan You can add channels manually if they aren't detected by the Auto Scan utility using the following steps: 1. Press the Menu button to display DTV-CHANNEL from the main menu. 2. Press the △ or ▽ button to select the MANUAL SCAN option, and then...
Page 45 - Time Zone; TIME ZONE
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 44 Time Zone 1. Press the Menu button to display DTV-CHANNEL from the main menu. 2. Press the △ or ▽ button to select TIME ZONE option. 3. Press the ▷ button to enter the TIME ZONE settings. . 4. Press the Enter button to highlight the input column, and then...
Page 46 - Channel Control; Press the; CHANNEL CONTROL
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 45 Channel Control Change Passwords 1. Press the Menu button to display DTV-CHANNEL from the main menu. 2. Press the △ or ▽ button to select CHANNEL CONTROL option. 3. Press ▷ button to enter the sub-menu. CONTROL BUTTONS
Page 47 - PASSWORD; when you have finished entering the PIN, new
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 46 4. Press the ▷ button to enter the PASSWORD menu. 5. Enter your new 4-digit PIN twice. If the PIN is not correct, main menu will appear again. 6. when you have finished entering the PIN, new setting to be operation. CONTROL BUTTONS NUMBER BUTTONS
Page 48 - Edit Favorite Channel
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 47 Edit Favorite Channel You can block access to channels or add them to your favorites list using the following steps: Under the CHANNEL CONTROL options: 1. Press the △ or ▽ button to select CHANNEL EDIT item. 2. Press the ▷ button to enter the CHANNEL EDIT...
Page 49 - DTV Rating Setting
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 48 DTV Rating Setting This menu lists both MPAA and USTV (FCC) Parental ratings. You can independently lock the MPAA and TV ratings. The locked ratings are indicated by the lock symbol. Under the CHANNEL CONTROL options: 1. Press the △ or ▽ button to select ...
Page 50 - FV
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 49 Rating ( Lock Programs by Rating ) Explanation of the MPAA and TV (FCC) Rating Systems: USTV (FCC) Age-Based Ratings TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ag...
Page 51 - Closed Caption Options; CC
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 50 Closed Caption Options At Digital TV mode. follow these steps to turn on closed captioning: You must use the remote control to enable / disable the function. If the I-Plate indicates that there is Closed Caption data on the current channel, pressing the C...
Page 52 - Current Program; Next Program; Info
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 51 INFO ( Information-Plate ) When you are watching digital channels, you can view the current program name and relevant information by pressing the “INFO” button to show I-Plate on screen. Current Program After pressing the Info button, the I-Plate appears ...
Page 53 - button to display the; MTS
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 52 MTS ( Multitrack Language Selection-Design ) 1. Press the Enter / MTS button to display the Multi-language window. 2. Use △ or ▽ keys to highlight the language you want and press Enter . 3. Press the Exit button to close the language window. MTS Button EN...
Page 54 - Button; Favorite Channel List
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 53 Fav. CH Button Favorite Channel List 1. When you are watching broadcast or cable TV channels, you can press the “FAV” button on the remote control to display the Favorite Channel List. 2. Use ◁ or ▷ keys to select the input source program lists. 3. Use △ ...
Page 55 - Selecting Digital Channels; “button; Freezing the Picture; FREEZE
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 54 Selecting Digital Channels Selecting digital channel numbers is different from selecting traditional channel numbers. For example, To select digital channel number: 10 - 2 (1) press numeric key “1” and “0” (2) press the “ ▷ “button (3) press the numeric k...
Page 56 - ARC
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 55 E. Other Functions 1. Channel +/ - : Under TV mode, Channel + / - keys are for changing channels. 2. Volume +/ - : Under any display mode, “ Volume + / - ” are for adjusting sound volume. 3. ARC (Aspect Ratio Control) : ˙ Full : Expands 4:3 video sources ...
Page 57 - Programming Remote Control; A. Direct Device Code Setup
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 56 Programming Remote Control A. Direct Device Code Setup Although your Remote Control is set up to provide control of this TV, you can specify other devices to be controlled, according to the following steps. [MODE] → <<SET>> (2 blinks) → 5- dig...
Page 58 - B. Searching for a Device Code
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 57 B. Searching for a Device Code If none of the codes listed under Device Codes list match your device, you can search for a set of commands that will work. Your Remote will sample all the codes in its system to find one that will allow you to control your ...
Page 59 - Cable Converters
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 58 C. Device Codes The following sections list the available device codes for each device mode button. If there is more than one code listed for device, enter the first one, and then try the POWER button. If the device turns on (or off), the code is correct....
Page 60 - Satellite Receivers
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 59 Satellite Receivers AlphaStar 00772 NEC 01270 Chaparral 00216 Next Level 00869 Crossdigital 01109 Panasonic 00247, 00701 DirecTV 00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076, 01109, 00099, 01392, 01640, 01442, 01414, 01108 P...
Page 61 - Audio Amplifiers
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 60 Audio Amplifiers Bose 30674 Sansui 30321 GE 30078 Shure 30264 JVC 30331 Sony 30689 Marantz 30321 Soundesign 30078 Nakamichi 30321 Victor 30331 NEC 30264 Wards 30078 Optimus 30395 Yamaha 30354, 30133 Realistic 30395 --------------- ------------------------...
Page 62 - VCR
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 61 VCR ABS 21972 Gateway 21972 Admiral 20048, 20209 GE 20060, 20035, 20240 Aiko 20278 General 20045 Aiwa 20037, 20479 Go Video 20432 Alienware 21972 GoldStar 20037, 20209, 20038, America Action 20278 Haojie 20240 American High 20035 Harman/Kardon 20081, 2003...
Page 64 - DVD Player
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 63 DVD Player Aiwa 20641, 21912 Microsoft 20522 Akai 20770 Mintek 20717 Allegro 20869 Mitsubishi 21521, 20521 Apex Digital 20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915 Nesa 20717 Blaupunkt 20717 Norcent 21003 Blue Parade 20571 Onkyo 2...
Page 65 - Troubleshooting; There is no picture or sound.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 64 Troubleshooting There is no picture or sound. ‧ Make sure the AC adapter is connected. ‧ Verify that there is a valid source signal. ‧ Make sure the correct input mode is selected. ‧ Make sure the master power switch has been turned on. There is no pictur...
Page 66 - Picture is not clear.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 65 Picture is not clear. ‧ The source signal may be weak. ‧ The provider may be experiencing difficulties. ‧ Check input connections. Picture is light or improperly tinted. ‧ Check the Hue, Saturation and Color adjustments. ‧ Reset the TV to the factory defa...
Page 67 - The picture is doubled or tripled.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 66 The picture moves. ‧ The source signal may be weak. ‧ The provider may be experiencing difficulties. ‧ Check input connections. The picture is doubled or tripled. ‧ The source signal may be weak. ‧ Check input connections. The picture is spotted. ‧ There ...
Page 68 - PC / DVI Timing Table
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 67 PC / DVI Timing Table Mode No. Mode Name Resolution H. Freq (KHZ) V. Freq (HZ) H. Polarity V. Polarity Pixel CLK (MHZ) Hor. Total Hor. Display H. Back Porch Hor. Sync Width Ver..Total Ver. Display V. Back Porch Ver. Sync Width 1 VGA 60HZ 640*480 31.469 59...
Page 69 - Specifications; ITEMS
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 68 Specifications ITEMS SPECIFICATION Screen Size 37.07” TFT-LCD Panel (CMO) Aspect Ratio 16 ： 9 Resolution 1920 x 1080 Display Area (opening) H x V 820.8 mm x 461.7 mm Pixel Pitch 0.1425 mm x 0.4275 mm x RGB Display colors 16,777,216 colors Contrast Ratio (...
