Planar PXL2760MW - Manual

3 Package Overview Congratulations on your purchase of this high per formance LED edge lit, LCD monitor. This LED LCD Monitor comes with the following accessories: LED LCD Monitor Base Power Cord VGA Signal Cable Audio-in Cable HDMI Cable User’s Guide

4 First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the...

5 Front View of the Product ① ② ③ ④ ⑤ ① OSD Turn On/ Off ② Scroll Down/ Adjust Decrease/ Picture Mode/ Auto * ③ Scroll UP/ Adjust Increase/ Audio Adjust/ Mute * ④ Input select/ Confirm Selection ⑤ Power On/Off / LED Indicator * Hot keys Instructions please see “Using the OSD Menu” on page 7.

6 Rear View of the Product ① ②③ ④ ⑤ ⑥ ① Power Input ② Audio Input ③ Headphone Jack ④ DisplayPort Input (DisplayPort 20 pin) ⑤ VGA Input (D-Sub 15 pin) ⑥ HDMI input (HDMI 19 pin)

7 Quick Installation 1. Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note: The monitor ships with only VGA and HDMI cables. DisplayPort cable may be sourced separately from a cable supplier. 2. Conn...

8 Basic Operation Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press Power button on the front of LED LCD Monitor. The power LED indicator light will be bl...

10 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▼ or ▲ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertic...

13 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 76...

14 Technical Information Panel 27” TFT (with LED backlight) Power Management On: 40 Watts (typical), 50 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3114 x 0.3114 mm Display Color 16.7M T...

15 Wall-Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure belo...

16 Care and Maintenance Care Avoid exposing your LED LCD Monitor direc tly to sunlight or other heat source. Place your LED LCD Monitor away from the sun to reduce glare. Put your LED LCD Monitor in a well ventilated area. Do not place any heav y things on top of your LED LCD Monitor. Make cer tain ...

17 Planar Support Cables, Replacement Lamps, Accessories To find cables, replacement lamps and accessories for your Planar projector, monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/...