Planar PT2275SW/PT2285PW - Manual

Introduction About PT2275SW / PT2285PW The PT2275SW / PT2285PW is a 22" fl at panel screen with an active matrix, thin- fi lm transistor (TFT) liquid crystal display (LCD). Features include: • Direct Analog signal input• Direct Digital signal input• Active matrix TFT LCD technology• 1920 x 1080 ...

4 Package Overview LCD Display Power Cord VGA Signal Cable RS-232 Cable (PT2275SW only) USB Cable ( A to B) Audio-in Cable DVI-D Cable Cable Cover Screw Touch Screen Driver Installation CD-ROM Landing Strip User’s Guide xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com

Installation Product Overview • Front View PT2275SW PT2285PW • PT2275SW Bottom View (Without Stand) VGA IN AC IN AUDIO DVI IN RS-232 USB • PT2285PW Bottom View (Without Stand) VGA IN AC IN Audio DVI IN USB 5

Start Your Installation 1. Lay the LCD fl at on an even surface. 2. Remove the stand back cover by pulling in the direction of the arrow as seen in step 2 diagram. 3. Move the stand into position as seen in step 3 diagram. 4. Connect the cables to the appropriate connectors as seen in Step 4 diagram...

Kensington Security Slot The monitor can be secured to your desk or any other fi xed object with Kensington lock security products. The Kensington lock is not included. 10

VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which de fi nes a physical mounting interface for fl at panel monitors, and corresponding with the standards of fl at panel monitor mounting devices, such as wall and table arms. The VE...

12 Remove the Deskstand Remove 4 screws and then remove hinge.

13 User Controls Side Panel Controls Icon key Name Menu Up Down Enter Power OSD Key Menu off status Menu on status Menu appear Menu disappear / return to main item Brightness Main item select up / Adjust up Mute Main item select down / Adjust down Enter / Select sub-item function Power On / Off

14 How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu.2. Choose the adjustment items by pressing the “Enter ” button.3. Adjust the value of the ad...

15 On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving scree...

Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected ...

Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or our service center for more in...

Product Dimensions PT2275SW 538.5 mm 383.8 mm 330.0 mm 73.2 mm 287.1 mm 327.74 mm Side View Top View Front View 18

Rotate 330.0 mm 73.2 mm 573.1 mm 538.5 mm 287.1 mm 327.7 mm Top View Front View Side View 19

Compatibility Modes Mode Resolution H-Frequency(khz) V-Frequency(hz) IBM VGA 720X400 31.47 70 IBM VGA 640X480 31.47 60 Apple MacII 640X480 35.00 66 VESA VGA 640X480 37.86 72 VESA VGA 640X480 37.50 75 VESA VGA 800X600 35.16 56 VESA VGA 800X600 37.88 60 VESA VGA 800X600 48.08 72 VESA VGA 800X600 46.88...

Touch Screen Driver Installation The PT2275SW is available with both RS232 and USB connections. The touch driver is located on the enclosed CD-ROM for these operating systems: Windows ® 7, VISTA 64/32 bits, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple ® Mac OS. The PT2285PW is available w...

PT2285PW Calibration Instructions: Calibrating the touch screen in Windows 7:1. Tap the Start button, Control Panel and then Hardware and Sound.2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.3. On the Display tab, under Display options, tap Calibrate and then Yes to all...

If you are using a PC running Windows ® CE, follow the instructions below (PT2275SW only): 1. Power on the computer.2. Make sure that the RS232 or USB cable is connected to the computer.3. Using Platform Builder, build an image fi le by following the step-by-step instructions found in the zipped fi ...

Product Registration and Technical Support Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the bene fi ts of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/...