Planar PT1545R - Manual

Introduction About PT1545R/PT1545P The PT1545R/PT1545P is a 15" flat panel screen with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD).This unit is to be used as commercial and light industrial equipment only. Features include: • Direct Analog signal input• Active matri...

Touch Screen for PT1545R • 5-wire resistive touch screen for finger and stylus input• Surface: Anti-glare treatment• Interface: Dual RS-232 Serial/USB controller• Transmittance: 82%±5%• HID: Windows® 7/8• Driver: Windows® 7/8, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux kernel 2.6.x (32 ...

4 Package Overview LCD Display Power Cord VGA Signal Cable RS-232 Cable (PT1545R only) USB Cable ( A to B) Audio-in Cable Landing Strip User’s Guide xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com Cable Cover Screw

Installation Product Overview • Front View • PT1545R Bottom View (Without Stand) • PT1545P Bottom View (Without Stand) 5 RS-232 VGA AC IN USB POWER SWITCH AUDIO AC IN USB POWER SWITCH VGA

6 Start Your Installation Please follow these instructions so that you can hookup the cables to associated connector.1. Lay the display flat on an even surface.2. Move the stand into position as seen in the step 2 diagram.3. Remove the cable cover as seen in the step 3 diagram.4. Connect the cables ...

Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. The Kensington lock is not included. 9

VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which defines a physical mounting interface for flat panel monitors, and corresponding with the standards of flat panel monitor mounting devices, such as wall and table arms. The VESA m...

Remove the Deskstand Remove 4 screws and then remove hinge. 11

User Controls Side Panel Controls Power Icon Key Name Menu Up Down Enter OSD Key Menu off status Menu on status Menu appear Menu disappear/ return to main item Brightness Main item select up/ Adjust up Mute Main item select down/ Adjust down Enter/Select sub-item function Power On/Off 12

13 How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu.2. Choose the adjustment items by pressing the “Enter ” button.3. Adjust the value of the ad...

On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving screen i...

Appendix Troubleshooting If you are experiencing trouble with the display, refer to the following. If the problempersists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected descr...

16 Warning Signal If you see warning messages on your screen, this means that the display cannot receive a clean signal from the computer graphics card.Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or Planar for more information. No Sign...

Product Dimensions PT1545R 17 202.0 mm 222.5 mm 350.8 mm 306.5 mm 275.9 mm 196.1 mm 67.0 mm ► Side View ► Top View ► Front View

Compatibility Modes Mode Resolution H-Frequency (KHz) V-Frequency (Hz) IBM VGA 720 x 400 31.47 70 IBM VGA 640 x 480 31.47 60 VESA VGA 640 x 480 37.86 72 VESA VGA 640 x 480 37.50 75 VESA SVGA 800 x 600 35.16 56 VESA SVGA 800 x 600 37.88 60 VESA SVGA 800 x 600 48.08 72 VESA SVGA 800 x 600 46.88 75 VES...

Touch Screen Driver Installation The PT1545R is available with both RS232 and USB connections. The touch driver islocated at www.planar.com/support for these operating systems: Windows® 7/8, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux kernel 2.6.x (32 bit & 64 bit),Apple® Mac OS. The...

PT1545P Optional Calibration Tool Install: Calibrating the touch screen in Windows 7/8:1. Tap the Start button, Control Panel and then Hardware and Sound.2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.3. On the Display tab, under Display options, tap Calibrate and then ...

PT1545R Install Instructions: If you are using a PC running Windows® 7/8, VISTA, XP, 2000, ME, 98, NT4.0, follow the instructions below: 1. Power on the PC. 2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the display. 3. Visit www.planar.com/support. 4. Follow the step-by-s...

PT1545P Install Instructions: If you are using a PC running, Windows® 7/8, VISTA, XP, 2000, follow the instructions below: 1. Power on the PC. 2. Make sure that the USB cable is connected to the computer. 3. Visit www.planar.com/support. 4. Follow the step-by-step instructions as shown on the pop-up...

Technical Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www. PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touch screen drivers, warra...