Planar PL2410W - Manual - manualsarea.com

Page 2 - Content

Content Operation Instructions ................................................................................................................................................... 1 Safety Precautions .......................................................................................................

Page 3 - Operation Instructions; Reorient or relocate the receiving antenna.; Important Recycle Instruction:

1 Operation Instructions Thank you for purchasing this TFT LCD Monitor, a high-resolution multi-scan color TFT LCD Monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This TFT LCD Monitor has been tested and f...

Page 4 - Safety Precautions; Do not place heavy objects on the cable or power cord.

2 Safety Precautions This TFT LCD Monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the TFT LCD Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep th...

Page 5 - First Setup; Install the stand base

3 First Setup Congratulations on your purchase of this high performance TFT LCD monitor. This TFT LCD Monitor comes with the following accessories :  LCD Monitor  User's Guide  Power Cable  Base  VGA Cable (15 pin) Install the stand base 1. Lay the TFT LCD Monitor flat on a table with the LCD s...

Page 6 - Front View of the Product; Input select/ Confirm Selection

4 Front View of the Product ① OSD Turn On/ Off ② Contrast/Brightness Setting/Scroll Down/Adjust Decrease ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ Power On/ Off ⑥ LED Indicator ① ②③④ ⑤⑥

Page 7 - Rear View of the Product; Power Input

5 Rear View of the Product ⑦ Power Input ⑧ DVI Input (DVI 24 pin) ⑨ VGA Input (D-Sub 15 pin) ⑦ ⑧ ⑨

Page 8 - Quick Installation; monitor and computer are powered OFF.

6 Quick Installation 1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the AC power cord to the AC/DC power adapter, then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. 4. Set the timing mo...

Page 9 - Basic Operation; POWER; Using the OSD Menu

7 Basic Operation Before using the TFT LCD Monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the TFT LCD Monitor on/off: Press POWER button on the front of TFT LCD Monitor. The power LED indicator lights green wh...

Page 11 - Advanced Operation—OSD Menu

9 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Po...

Page 14 - Supporting Timing Modes; Doing so may result in permanent damage to your monitor.

12 Supporting Timing Modes STANDARD RESOLUTION VGA 720 X 400 @ 70Hz VGA 640 X 480 @ 60Hz Mac 640 X 480 @ 67Hz VESA 640 X 480 @ 72Hz VESA 640 X 480 @ 75Hz VESA 800 X 600 @ 56Hz VESA 800 X 600 @ 60Hz VESA 800 X 600 @ 72Hz VESA 800 X 600 @ 75Hz Mac 832 X 624 @ 75Hz VESA 1024 X 768 @ 60Hz VESA 1024 X 76...

Page 15 - Technical Information

13 Technical Information LCD Panel 23.6” TFT Power Management On: 40 Watts (typical), 55 Watts (maximum) Standby Mode: <0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.2715 mm LCD Display Color 16.7M Tilt -2° (+/-...

Page 16 - Wall-mount instruction; Lay the TFT LCD Monitor face down on a soft surface.; Attaching The Optional Wall Mount Arm (not supplied); Place the wall mounting arm onto the back of the TFT LCD

14 Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This TFT LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the TFT LCD Monitor before performing the procedure below. 1. Lay the ...

Page 17 - Care and Maintenance; Care; Put your TFT LCD Monitor in a well ventilated area.; Note; Pull the base from Parallel versus Panel to Vertical.; Safety Tips; Troubleshooting; No power; Make sure all signal cables are installed.; Power on but no screen image; Connect the TFT LCD Monitor to another computer.

15 Care and Maintenance Care  Avoid exposing your TFT LCD Monitor directly to sunlight or other heat source. Place your TFT LCD Monitor away from the sun to reduce glare.  Put your TFT LCD Monitor in a well ventilated area.  Do not place any heavy things on top of your TFT LCD Monitor.  Make cer...

Page 18 - Product Registration and Technical Support; Register Your Planar Products Today; Planar Support

16 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/pro...

Planar PL2410W - Manual

Table of Contents:

Summary

Other Planar Models