Page 3 - Contents
1 Contents Introduction ...........................................................................................2 Features .........................................................................................................................................2 Safety Precautions ...................
Page 4 - Introduction; Features; Warning
2 Introduction The PE1900 LCD monitor has a 19-inch active matrix TFT (thin film transistor) liquid crystal display module. It is designed for use with any Windows ® -based PC. Features Ö Automatic configuration to the PC video settings with maximum SXGA resolution. Ö Three control buttons plus OSD ...
Page 6 - Installation; Unpacking the Display
4 Installation Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your display, first read through the instructions in this chapter and the safety precautions in the previous chapter. Unpacking the Display When you are unpacking the display, make sure...
Page 7 - Making the Connections
5 The functions of the three control buttons which are located at the lower left side of the front panel of your display are described as below: Button Function Description Select (1) Turn on OSD menu while it is off. (2) Execute the function selected in the OSD menu. (3) Hold down for 3 sec will cl...
Page 9 - Using Your Display; Turning the Display On and Off
7 Using Your Display This chapter contains information about using your LCD Monitor. Turning the Display On and Off Use the power button located at the lower right side of the front panel of the display to turn the display on and off. When the display is on, the light (LED) near the Power button is ...
Page 10 - Tilting the Display; Setting the Video Mode
8 Tilting the Display The monitors have a tilt feature that allows you to tilt the display back and forth to find the most comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull it toward you, or turn it left or right until it is in the desired position....
Page 13 - Adjusting Your Display; Summary of Control Buttons; Displaying the OSD “Main Menu”
11 Adjusting Your Display This chapter contains information about how to change display settings for your LCD Monitor. It is designed with an OSD menu to help you easily adjust to its optimum performance. Note: You must perform auto-setup before making any adjustments. Summary of Control Buttons The...
Page 14 - Auto Setup
12 Item Description Auto Adjust the “Auto Setup”. See “Adjusting Auto Setup” on page 12. Management Open the “ Management ” submenu to select Brightness, Contrast or Image Position for further adjustment. See Adjustment in the “Management” Submenu on page 13. Clock/Phase Open the “ Clock/Phase ” sub...
Page 15 - Adjusting the “Management” Submenu
13 3. Use ‘ Select ’ button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show the following message: If the image looks correct, choose ‘ Yes’ . OR If the image requires further adjustment, choose No . This will activate the ‘Phase’ bar for f...
Page 18 - Adjusting the “Clock/Phase” Submenu
16 Adjusting the “Clock/Phase” Submenu Follow the steps below to adjust the “Clock/Phase” submenu: 1. Activate the OSD “ Main Menu ”. 2. Use ‘ Up ( △ ) ’ (or ‘ Down ( ▽ ) ’) to move forward (or backward) to the clock/phase icon and highlight it. 3. If ‘Clock’ is selected, use ‘ Up ( △ ) ’ or ‘ Down ...
Page 19 - Adjusting the “Color” Submenu
17 Adjusting the “Color” Submenu Follow the steps below to adjust the “Color” submenu: Activate the OSD “ Main Menu ”. 1. Use ‘ Up ( △ ) ’ (or ‘ Down ( ▽ ) ’) to move forward (or backward) to the color icon and highlight it. 2. Use ‘ Select ’ button to enter the “Color” submenu. This activates three...
Page 21 - Adjusting the “OSD Display” submenu
19 Adjusting the “OSD Display” submenu Follow the steps below to adjust the OSD Horizontal and Vertical positions: 1. Activate the OSD “ Main Menu ”. 2. Use ‘ Up ( △ ) ’ (or ‘ Down ( ▽ ) ’) to move forward (or backward) to the OSD display icon and highlight it. 3. Use ‘ Select ’ button to enter the ...
Page 22 - Adjusting the Factory Recall
20 Select ‘Exit’ to exit the “OSD Display” submenu and return to the “ Main Menu ”. Adjusting the Factory Recall To recall factory settings back you should follow the steps below: 1. Activate the OSD “ Main Menu ”. 2. Use ‘ Up ( △ ) ’ (or ‘ Down ( ▽ ) ’) to move forward (or backward) to the factory ...
Page 23 - Selecting your preferred Language; Exit and Clear the OSD Menu
21 Selecting your preferred Language Follow the steps below to select one of the five languages: 1. Activate the OSD “ Main Menu ”. 2. Use ‘ Up ( △ ) ’ (or ‘ Down ( ▽ ) ’) to move forward (or backward) to the languages icon and highlight it. 3. Use the ‘ Select ’ button to enter the “Language” subme...
Page 24 - Using the Direct Keys
22 Using the Direct Keys There are two direct keys that function while OSD “ Main Menu ” is inactivated: “Auto-Setup” and “ Brightness.” Using the “Auto Setup” Direct Key Use Auto-Setup whenever you apply a new video mode or change the refresh rate. While the Auto- Setup routine is running, ensure a...
Page 26 - Troubleshooting; My display doesn’t work, even though the computer appears to work.; The message “Check Cable” appears on my display.; The message “Signal Out Of Range ” appears on my display.
24 Troubleshooting This chapter contains information about how to troubleshoot your LCD Monitor. If you have tried all of the items listed below, please contact qualified service personnel. A. My display doesn’t work, even though the computer appears to work. 1. Make sure the power cable is securely...
Page 27 - The image is very unstable.
25 E. The image is very unstable. 1. Set your PC to a supported video mode, preferably 1280 x 1024 at 60 Hz. See “Setting the Video Mode” on page 8. 2. Restore the original factory settings by choosing Factory Recall in the OSD “ Factory Recall ” submenu. 3. Perform the Auto Setup function. See “Aut...
Page 28 - Technical Information; Display Information
26 Technical Information This chapter contains technical information about your LCD Monitor. Display Information LCD Module 19-in, active matrix TFT, anti-glare coating, 0.294 mm pixel pitch. Display Size 14.8 (H) x 11.9 (V) inches. Viewing Angle Left / Right Up / Down -85 ° / 85 ° (Typical). -85 ° ...
Page 29 - Video Modes; Unknown Video Modes
27 Video Modes Your LCD monitor supports the following industry-standard combinations of screen resolution and refresh rates. Other combinations are possible, but may require adjustments to the image. For optimum performance, set your PC to a screen resolution of 1280 x 1024 at a 60 Hz refresh rate....
Page 30 - Regulatory Information; Agency Approvals
28 Regulatory Information Agency Approvals European USA Japan Others CE UL Safety CSA Emissions FCC Class B .DOC Immunity Ergonomic EPA YES FCC Statement: FCC Notice – Part 15 This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may no...
