Planar LX1200 - Manual

Planar LX1200

Planar LX1200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

LX1200

QUICK START GUIDE

LX1200

Thank you for choosing Planar’s LX1200
LCD touchscreen monitor.

Customer Service:
To view online documentation and frequently
asked questions, or to send an email to our
technical support staff , please visit:
http://www.planar.com/support or call
1-866-PLANAR1 (1-866-752-6271).

To receive advanced notifi cation of product
updates, please register your monitor at
www.planar.com/support.

Planar is one of the world’s most accomplished
providers of fl at-panel displays, with over 20
years’ expertise in fl at-panel innovation. The
company provides the most dependable display
solutions for various applications in industrial,
medical, and commercial markets.

Installation

1. Recommended Mounting -
• Planar recommends an approved mount
for in-vehicle use.
2. Cable Connections -

(Sold separately. Refer to the diagram below)

1. USB Type B Upstream

2.

VGA

Video

Cable

3. 12V Power Input
4. 3.5mm Audio Input Cable
5. All-in-one Power Cable

(See User’s Guide)

Package Overview

Contents -

LCD Display

Landing Strip

Touchscreen Driver

Installation CD-ROM

Important Recycle Instruction -

LCD Lamp(s) inside this product contain mercury. This

product may contain other electronic waste that can be

hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information,
contact the Electronic Industries Alliance at

WWW.EIAE.ORG.

For

lamp specifi c disposal information check

WWW.LAMPRECYCLE.ORG.

The test results show that this device meets the FCC rules. Refer to the product operation manual for FCC clas-
sifi cation found at: http://www.planar.com/support. Those limits are set to protect residential areas from the
devices with harmful emission. This device will produce, use and radiate radio frequency energy. In addition,
failure to follow the user’s manual to install or use this device might produce harmful interference with radio
communication. Notwithstanding the foregoing, it does not guarantee that this type of harmful interference
does not occur in some special installations. The interference caused by this device to the reception of radio
or television signals may be verifi ed by turning it on and off . Any changes or modifi cations to this TFT LCD
would void the user’s authority to operate this device.

020-0451-00A

36.65401G001 Ver. A

Features and User Controls

• 2-Port USB Hub
• Video Blanking for Privacy
• All-In-One Power Button Controls the

Remote

PC


1. USB Type A
2. Dimming Dial
• Adjust brightness by turning the dial.

Turn

off the backlight for video blanking

by turning the dial clockwise.
3. All-in-One Power Button
• This button doesn’t turn off the monitor
directly. When connected to a docking
station it will act as the power button for
the computer. When the computer is

turned

off , the LED will turn red and the

monitor will go into standby. See User’s
Guide for more detail
4. USB Type B Upstream to the Computer
5. VGA
6. Power 12V
7. Audio
8. Speaker Volume
• Adjust speaker volume by turning the dial.

9. LED Status Light
• Red - Standby mode. No video signal
• Green - The display is receiving a video
signal from the computer.
• Amber - The display has been dimmed to
off . Turn the dimming dial up to see the

display.

10. Front Accessible USB Port
• For USB peripherals - i.e., printer, memory

stick,

etc.

1

2

3

4 5

AFTER INSTALLATION IS COMPLETE,

PLEASE LEAVE IN VEHICLE

6

7

1

8

9

Keyboard

(optional)

Computer

USB

VGA

All-in-One Power

Audio

12V

Power Source

3. Power Up -
• Connect the video and power cables. The
unit will display a test screen as soon as
power is applied.

• Power up the computer.
- See the User’s Guide for the LX1200 at
www.planar.com/support for
advanced set-up instructions.
5. Touchscreen Set-up -
• Refer to the User’s Guide for touch set-up

instructions.

6. Cleaning -
• Use a clean cloth to clean the display. If

cleaning

fl uid is required, mild detergent

or IPA can be used, if applied to the cloth
fi rst.

6948 PLNR.LX1200_QSG.indd 1

6948 PLNR.LX1200_QSG.indd 1

3/10/06 9:50:25 AM

3/10/06 9:50:25 AM

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Planar Models

All Planar Other