Page 2 - CAUTION; IMPORTANT NOTICE; Information to User; – TO PREVENT FIRE OR SHOCK
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead, within an equilateral triangle, is intended to alert th...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be ad...
Page 4 - DANGER; NOTE TO CATV SYSTEM INSTALLER; You may use
POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Ne...
Page 5 - To establish a safe level:; We Want You Listening For A Lifetime
S001_En Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics G...
Page 6 - Contents
Contents 6 En Contents 01 Before you start Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remote control . . . . . . . . . 8 Using the remote control . . . . . ....
Page 7 - English; Chapter 1; Before you start; Features; What’s in the box
Before you start 01 7 En English Chapter 1 Before you start Features • Progressive scan-compatible Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV or monitor. (Check your TV/monitor for compatibility with this feature.) • Cin...
Page 8 - Open the battery compartment cover on the; Using the remote control; General disc compatibility; Video CD
Before you start 01 8 En Putting the batteries in the remote control 1 Open the battery compartment cover on the back of the remote control. 2 Insert two AA/R6P batteries into the battery compartment following the indications ( , ) inside the compartment. 3 Close the cover. Note Incorrect use of bat...
Page 9 - Frequently asked questions; Model
Before you start 01 9 En English – The DVD-Video content on DVD side of a DualDisc may or may not be played with this product. – Since audio content on ‘non-DVD’ side of a DualDisc is not compliant with the Compact Disc Digital Audio specification, it may or may not be played with this product. – If...
Page 10 - Connecting up; Rear panel connections; Front panel connections
Connecting up 02 10 En Chapter 2 Connecting up Rear panel connections 1 AC IN Connect to a power outlet using the supplied power cable only. 2 COMPONENT VIDEO OUT A high-quality video output for connecting to a TV or monitor with a component video input. 3 COAXIAL DIGITAL OUT A digital audio output ...
Page 11 - Easy connections
Connecting up 02 11 En English Easy connections The setup described here is a basic configuration that allows you to record TV programs on both this recorder and your VCR. When watching recordings from this recorder, set your TV to input 1; switch to input 2 to watch a video playing in the VCR. Impo...
Page 12 - Connecting using an S-video output; Use a component video cable (not supplied) to
Connecting up 02 12 En Using other types of video output This recorder has standard (composite), S-video and component video outputs. The main difference between them is the quality of the picture. S-video delivers a better picture than composite video, while component video gives better picture qua...
Page 13 - Connecting to a cable box or satellite receiver (1); Important
Connecting up 02 13 En English Connecting to a cable box or satellite receiver (1) If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page. Usin...
Page 15 - Connecting to an AV amplifier or receiver
Connecting up 02 15 En English Connecting to an AV amplifier or receiver To enjoy multichannel surround sound you need to connect this recorder to an AV amp/receiver using the digital coaxial output. In addition to the digital connection, we recommend also connecting using the stereo analog connecti...
Page 16 - Connecting a VCR or analog camcorder; Connect a set of audio and video outputs of your; Connect a set of audio and video inputs of your; Plugging in; Use the supplied power cable to connect this
Connecting up 02 16 En Connecting other AV sources Connecting a VCR or analog camcorder 1 Connect a set of audio and video outputs of your VCR or camcorder to a set of inputs on this recorder. This enables you to record tapes from your VCR or camcorder. • You can use standard video or S-video cables...
Page 17 - Chapter 3; Controls and displays; Front panel
Controls and displays 03 17 En English Chapter 3 Controls and displays Front panel 1 STANDBY/ON Press to switch the recorder on/into standby. 2 Front panel inputs (page 10) Audio/video inputs, convenient for connecting a video camera. 3 Front panel display See below for details. 4 IR remote sensor (...
Page 19 - TIMER REC
Controls and displays 03 19 En English TIMER REC Press to set a timer recording from the standard Timer Recording screen. CM SKIP Press repeatedly to skip progressively forward through the audio or video playing. DVR-230_KU.book Page 19 Thursday, January 27, 2005 2:42 PM
Page 20 - Getting started; Switching on and setting up
Getting started 04 20 En Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator. This takes you through setting the clock and the internal TV tuner settings. If you’re using the recorder ...
Page 21 - Other settings you can make
Getting started 04 21 En English 6 Use the / (cursor up/down) buttons to select ‘Auto’ or ‘Manual’ clock setting, then press ENTER. • Auto clock setting Some TV channels broadcast time signals together with the program. This recorder can use these signals to set the clock automatically. Use the / (c...
Page 22 - Playing back your recording; Using the built-in TV tuner; Changing TV channels
Getting started 04 22 En Making your first recording This quick guide shows you how to make a basic recording of a TV program to a recordable DVD. Recording is covered in much more detail in chapter 6 ( Recording ). 1 If they aren’t already on, switch on your TV and this recorder. Press STANDBY/ON t...
Page 23 - Note; Changing audio channels; Basic playback; Mono
Getting started 04 23 En English Note • Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125. Changing audio channels Some TV programs are broadcast with both a main and a Second Audio Program (SAP). You can change the TV audio using the AUDIO button. • Press AUDIO t...
Page 24 - Playing DVD discs; Playing Video CDs
Getting started 04 24 En • Press STANDBY/ON to switch the recorder into standby. Playing DVD discs The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. Playing audio CDs The table below shows the basic playback controls for audio CDs. Note • If you want to play ...
Page 25 - Stop display 1
Getting started 04 25 En English Note • When playing in PBC mode, some playback features, such as search and repeat play are not available. Displaying disc information on-screen You can display various on-screen information about the disc loaded. 1 Press DISPLAY repeatedly to display/change the on-s...
Page 26 - Play display 1
Getting started 04 26 En 4 Lock Disc On or Off 5 Number of titles/tracks on disc Play display 1 1 Disc type and mode Shows the disc type ( DVD-R , DVD-RW , CD , No Disk etc.), and the disc mode for recordable DVD, if applicable ( VR or Video ). Shows PBC if a Video CD is in playback control (PBC) mo...
Page 27 - Chapter 5; Playback; Introduction
Playback 05 27 En English Chapter 5 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the /// (cursor buttons) and ENTER . To go back one level from any screen, use the RETURN button. Remember also that the button guide at the b...
Page 28 - Navigating discs
Playback 05 28 En Note • The Disc Navigator is only accessible when there is a disc loaded. • Another way to find a particular place on a disc is to use the time search mode. See Search Mode on page 30. Navigating discs During playback you can easily jump to another title, chapter or track on a disc...
Page 29 - Playing in slow motion; Frame advance/frame reverse
Playback 05 29 En English • When scanning DVDs with Dolby Digital or Linear PCM sound on forward Scan1 , Linear PCM is output from the coaxial digital output. No sound is output when using other scan speeds. • Depending on the disc, normal playback may automatically resume when a new chapter is reac...
Page 30 - Tip
Playback 05 30 En The Play Mode menu The Play Mode menu gives you access to search and repeat play functions. Important • You can’t use the Play Mode features with Video CDs playing in PBC mode, or while a DVD disc menu is being displayed. For other restrictions, see the following sections. 1 Press ...
Page 31 - Repeat play; Displaying and switching subtitles; Switching DVD soundtracks
Playback 05 31 En English Note • When using time search, playback may occasionally start slightly before or after the time you input. Repeat play There are various repeat play options, depending on the kind of disc loaded. 1 Select ‘Repeat’ from the Play Mode menu. 2 Use the / (cursor up/down) butto...
Page 32 - Switching camera angles
Playback 05 32 En • Press AUDIO repeatedly to select an audio soundtrack. Note • The sound may drop out momentarily when switching soundtracks. • Some discs only allow you to change audio language from the disc menu. Press TOP MENU to access. • To set audio language preferences, see Language on page...
Page 33 - Chapter 6; About DVD recording; Recording time and picture quality
Recording 06 33 En English Chapter 6 Recording About DVD recording This recorder can record on both DVD-R and DVD-RW media. The main difference between the two is that DVD-R discs can only be recorded once, while DVD-RW can be recorded, erased and re-recorded many times. A further difference between...
Page 34 - CPRM; Recording equipment and copyright
Recording 06 34 En Restrictions on video recording • You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause automatically and an error ...
Page 35 - Basic recording from the TV; Setting a timer recording; Channel number
Recording 06 35 En English Basic recording from the TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. 1 Load a recordable disc. • If you load a new blank DVD-RW disc, the recorder takes a short while ...
Page 37 - Timer recording using the VCR Plus+; Extending a timer recording in progress; Moving the end time by 30-minute blocks
Recording 06 37 En English 5 To exit the timer recording screen, press HOME MENU. • If you change the Auto Channel Setting (from cable to antenna or the other way around), existing timer programs will be erased. Timer recording using the VCR Plus+ ® programming system This system makes programming t...
Page 38 - Programming a new end time; Timer recording FAQ; Frequently Asked Questions
Recording 06 38 En 2 Press REC repeatedly to extend recording in 30 minute increments. Programming a new end time 1 During timer recording, press TIMER REC to display the Timer Recording screen. You can also access the Timer Recording screen from the Home Menu (press HOME MENU , select Timer Recordi...
Page 39 - Finalizing a disc
Recording 06 39 En English • What happens when two or more timer programs overlap? Basically, the program with the earlier recording start time has priority. However, the recorder will start recording the program with the later start time after the earlier program is finished. If two programs have t...
Page 41 - Chapter 7; Editing; Erase; Edit mode
Editing 07 41 En English Chapter 7 Editing Using this recorder you can edit video content on unfinalized Video mode and VR mode DVD discs. More detailed editing is possible on VR mode discs, which can be edited at the chapter level. Video mode discs can only be edited at the title level. Once a Vide...
Page 42 - Title Name
Editing 07 42 En Title Name You can give titles names up to 64 characters long for VR mode recordings and 32 characters for Video mode recordings. 1 Select ‘Title Name’ from the Title Edit menu options. 2 Use the / buttons to select the title you want to name, then press ENTER to go to the name inpu...
Page 44 - Combine
Editing 07 44 En Divide Use this command to divide a chapter into two new ones. 1 Select ‘Divide’ from the Chapter Edit menu options. 2 Use the / buttons to select the title containing the chapter you want to divide, then press ENTER. 3 Use the /// (cursor buttons) to select the chapter, then press ...
Page 45 - Chapter 8; The Initial Setup menu; Using the Initial Setup menu; Clock
The Initial Setup menu 08 45 En English Chapter 8 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. • Press HOME MENU and select ‘Initial Setup’. • Some settings can only be changed when th...
Page 46 - Tuner; Auto CH Setup
The Initial Setup menu 08 46 En 1 Select ‘Manual’. 2 Use the / buttons to set your time zone, then press ENTER. 3 Press then use the / buttons to set daylight saving time (D.S.T.) On or Off, then press ENTER. 4 Set the current date and time. Use the / buttons to change the value in the highlighted f...
Page 49 - Disc settings; Initialize; Undo Finalize; Video settings; Video Out
The Initial Setup menu 08 49 En English Disc settings Lock Disc • Default setting: Off Set to On to prevent accidental recording, editing or erasing of the disc loaded. If you need to unlock the disc to make edits, select Off . Important • A locked disc can still be initialized (which will completel...
Page 50 - Input Adjust; Audio settings; Audio Adjust setting
The Initial Setup menu 08 50 En Important If you switch to Progressive when using a TV that is not compatible with progressive-scan video, you will not be able to see anything displayed on your TV. If this happens, press and hold the + button on the front panel, then press STANDBY/ON . This will set...
Page 51 - Audio In
The Initial Setup menu 08 51 En English From the Audio Adjust screen, use the / buttons to adjust the Audio DRC setting On or Off . ( Off leaves the dynamic range untouched; On ‘squashes’ the dynamic range, making it good for lower-level listening.) Press ENTER to confirm and exit the screen. Audio ...
Page 52 - Auto Chapter; Playback settings; Parental Lock
The Initial Setup menu 08 52 En Recording settings Optimized Rec • Default setting: Off On the default setting, if a timer program (Standard or VCR Plus+ programming system) is set but there isn’t enough space on the disc at the recording quality set, the recording will start, but it will be cut off...
Page 53 - Change Password
The Initial Setup menu 08 53 En English Note • Not all discs that you may consider inappropriate for your children use the Parental Lock feature. These discs will always play without requiring the password first. • If you forget the password, you can reset the recorder to its factory settings (see R...
Page 55 - Selecting ‘Other’ languages; Visual settings; Action settings
The Initial Setup menu 08 55 En English Tip • You can switch between the audio and subtitle languages recorded on a DVD disc any time during playback using the AUDIO and SUBTITLE buttons. (This does not affect these settings.) Selecting ‘Other’ languages 1 Select ‘Other’ from the language list. This...
Page 56 - Additional information; When viewing on a standard TV or monitor
Additional information 09 56 En Chapter 9 Additional information Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The program is shown in wi d escreen with black bars at the top an d bottom of the screen. 4:3 (Pan &...
Page 57 - Troubleshooting; General; Problem
Additional information 09 57 En English Troubleshooting Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check the points below. Sometimes the trouble may lie in another component. Investigate the other components an...
Page 58 - TV Screen Size
Additional information 09 58 En • If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions. Screen is stretched vertically or hori-zontally • Make sure that the TV Scr...
Page 60 - Language code; Country/Area code list; Country/Area code letter
Additional information 09 60 En Language code list Language (Language code letter), Language code Country/Area code list Country/Area, Country/Area code , Country/Area code letter Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German ( d e), 0405 Italian (it), 0920 Spanish (es), 0519 Chine...
Page 61 - On-screen displays and recorder displays; Message
Additional information 09 61 En English On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message Explanation/Action • Initializing disc. Please wait a moment. When you load a bl...
Page 63 - Moving the recorder; Setting up; Glossary; Analog audio; Aspect ratio; Digital audio
Additional information 09 63 En English Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna. Use in a kitchen or other room whe...
Page 65 - Specifications
Additional information 09 65 En English Specifications General System . . . . . . . . . . . . . . . . . . . . . . . DVD-Video, DVD-R/RW, Video-CD, CD, CD-R/RW (CD-DA) Power requirements . . . . . . . . . . . . . . . . . . . . . . 120 V, 60 HzPower Consumption . . . . . . . . . . . . . . . . . . . . ...
Page 66 - Index
66 En Index A Audio digital output settings 51 input settings 51 setting preferences for audio language 54 setting which channel to record 35 switching on playback 31 , 32 switching TV audio 23 C CD Audio compatibility 8 playback controls for 24 , 27 – 32 D Dolby Digital adjusting the dynamic range ...
Page 68 - PIONEER CORPORATION; PIONEER EUROPE NV
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER...
