Pioneer AVIC-Z150BH - Manual
Pioneer AVIC-Z150BH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – A. Downloading the firmware update files; IMPORTANT; If this optional firmware update is performed by Pioneer,; Procedure
- Page 4 – process within a minute.; least 5 minutes as the update process may be in process.; AVIC-Z150BH or AVIC-X950BH will automatically reboot and the
- Page 5 – The; button on your AVIC-X950BH or AVIC-Z150BT to begin the uCom update.; reboot and the “Program forced write” screen will reappear:
- Page 6 – SD -> uCom Progress; faceplate motorizes down to reveal the SD card slot.
- Page 7 – C. Verifying System Application Version; Press the ‘HOME’
- Page 9 – Wireless Technology; owner’s manual for additional details.
- Page 10 – The next screen will ask “Is this Android?”; “Is this device equipped with a Digital AV/VGA Connector?”
- Page 12 – E. Connecting Your iPhone with Lightning Connector; configuration when connecting your device.
Optional Firmware Update (Version 1.03) for 2013 Navigation Models:
AVIC-Z150BH and AVIC-X950BH
In this manual, iPhone® 5 and iPod® touch fifth generation will be referred to as “iPhone with Lightning
connector.”
The following preparatory steps must first be undertaken in order to connect an iPhone with Lightning
connector to your AVIC-Z150BH or AVIC-X950BH and use AppRadio Mode.
A. Download the firmware update files
B. Update the firmware on your AVIC-Z150BH or AVIC-X950BH
C. Verify System Application Version
D. Pair your iPhone with Lightning connector with your AVIC-Z150BH or AVIC-X950BH and
establish a connection between your iPhone with Lightning connector and the AVIC-Z150BH
or AVIC-X950BH via Bluetooth wireless technology
E. Connect your iPhone with Lightning connector to your AVIC-Z150BH or AVIC-X950BH using
Pioneer CD-IH202 AppRadio Mode HDMI Interface Cable Kit for iPod/iPhone (sold
separately)
Once Steps A through D have been completed, the [
Apps
] key on the Home screen will become active,
allowing you to utilize AppRadio Mode.
IMPORTANT
•
“iPod source” will no longer be available when using AppRadio Mode with an iPhone with Lightning
connector. To play music and/or video files from your iPhone with Lightning connector, please first
install the free of charge CarMediaPlayer app on your iPhone with Lightning connector and then
launch CarMediaPlayer while in AppRadio Mode.
•
If you have previously paired your iPhone with Lightning connector with the AVIC-Z150BH or
AVIC-X950BH, you will have to re-register and connect your device after the firmware update has
been completed.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A. Downloading the firmware update files IMPORTANT Please download and print these AVIC-Z150BH and AVIC-X950BH Firmware Update instructions before downloading and installing the firmware update. It is very important that you complete all steps correctly and in the order described below. WARNING! Thi...
4. Insert the SD Card or microSD Card into your AVIC-Z150BH or AVIC-X950BH. • The system will automatically recognize the firmware update file, reboot, and start the update process within a minute. • If the AV Source screen was not set to [OFF] prior to inserting the SD card or microSD card, you wil...
5. With the “Program forced write” screen displayed, press the ‘HOME’ button on your AVIC-X950BH or AVIC-Z150BT. • The “Program forced write [System uCom Write]” screen will appear: • Confirm the that 1) The SD Version shows 8.06 and 2) the uCom version is lower than 8.06. • If the SD version is dis...
