Phivve GZDWICMS125 - User Manual
Phivve GZDWICMS125 Ice Cream Maker – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Our ice cream machine can work under below conditions:; Please strictly follow the instruction on the yellow sticker.; Do not directly connect the machine to electricity generator.
- Page 4 – How to Make Ice Cream; when you hear scratch sounds between the beater
- Page 6 – Wash Cylinder; discharger, and the big silica O ring from the discharger); C. Clean the airtube of the airpump
- Page 8 – THE BELOW ARE MERELY FOR THE MANUFACTURER’S SETTING
- Page 9 – power supply is in accordance with that on the nameplate.
ICE CREAM MACHINE
MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Structure 2. Conditions Our ice cream machine can work under below conditions: Ambient temperature: 5~40°C mixture temperature: 2~35°C Power: 200~230V/50±1HZ (standard model), customized model e.g. 110V/60Hz, or 220V/60Hz, pleasefollow other instruction.* The above conditions can directly affect ...
4. How to Make Ice Cream 1. Wash Connect it to 16A socket, switch on the power with the stick on the left down part of control panel. Pour waterfrom the hoppers to fulfill the cylinders, press “WASH”, allow it to run for 2 minutes, then press the handle todirectly drain the water in the “WASH”mode.r...
Hopper chilling is controlled by the value of set temperature. When actual temperature is higher than the setvalue, the compressor will start in 5 minutes (in order to minimize the running times), when actualtemperature is lower than the set value, the compressor will immediately shut off. Cylinder ...