Page 2 - Our ice cream machine can work under below conditions:; Please strictly follow the instruction on the yellow sticker.; Do not directly connect the machine to electricity generator.
1. Structure 2. Conditions Our ice cream machine can work under below conditions: Ambient temperature: 5~40°C mixture temperature: 2~35°C Power: 200~230V/50±1HZ (standard model), customized model e.g. 110V/60Hz, or 220V/60Hz, pleasefollow other instruction.* The above conditions can directly affect ...
Page 4 - How to Make Ice Cream; when you hear scratch sounds between the beater
4. How to Make Ice Cream 1. Wash Connect it to 16A socket, switch on the power with the stick on the left down part of control panel. Pour waterfrom the hoppers to fulfill the cylinders, press “WASH”, allow it to run for 2 minutes, then press the handle todirectly drain the water in the “WASH”mode.r...
Page 6 - Wash Cylinder; discharger, and the big silica O ring from the discharger); C. Clean the airtube of the airpump
Hopper chilling is controlled by the value of set temperature. When actual temperature is higher than the setvalue, the compressor will start in 5 minutes (in order to minimize the running times), when actualtemperature is lower than the set value, the compressor will immediately shut off. Cylinder ...
Page 8 - THE BELOW ARE MERELY FOR THE MANUFACTURER’S SETTING
8. Parameters CODE INDICATION REMARK P00 time interval of auto freezerestarting Interval can be set between 5-30 minutes. P01 Precool temperature Range from 0-10 ℃ , if no precooling function, this code will not show P02 Fresh function in cylinderinterval Range from 30 to 120 minutes, If no precooli...
Page 9 - power supply is in accordance with that on the nameplate.
Mark:1: After replacing the motor or mechanical parts related to speed, be sure to perform automaticspeed identification: enter the F04 menu and clear the identified speed value. Then start thecleaning for more than 10 seconds, and the automatic speed recognition is completed.Note:Make sure turn on ...