Page 2 - For Customer Use; Know these; safety; symbols
WarrantyVerification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty. OwnerConfirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model...
Page 3 - Introduction 3; Features; • SmartPicture; Safety Precautions; Helpful Hints
Introduction 3 Features • Automatic Channel Setup• Automatic Clock Setting • Automatic Head Cleaner• Battery Backup• Blue Background• Child Lock• Daylight-Savings Time• Hi-Fi Stereo Tape Playback • Index Search• Multi-Channel Television Sound (MTS) System • 19 Micron Head, provides a better picture ...
Page 4 - Table of Contents
4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Befor...
Page 5 - Before Using Your VCR 5; Putting Batteries in the Remote Control; Replace the battery compartment lid.; Do not put objects between the remote control and the VCR.; VCR Maintenance
Before Using Your VCR 5 Putting Batteries in the Remote Control Using the Remote Control 3 Replace the battery compartment lid. 2 To record again, cover the hole with cellophane tape. • Do not put objects between the remote control and the VCR. • Point the remote control at the VCR’s remote sensor, ...
Page 6 - Hookups without a Cable Box; Disconnect the antenna or cable from your TV.
6 Hookups without a Cable Box ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 CABLEBOX LP 30561-003 OUT IN S-VIDEO OUT IN OR ANT. IN RF OUT 75 Ω ANT / CABLE OR 75 Ω ANT / CABLE The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box ora Direct Broadcast Syste...
Page 7 - or; Switch; Plug in the TV and the VCR.
Hookups without a Cable Box (cont’d) 7 ANT. IN VIDEO L R AUDIO (MONO) OUT IN OUT IN RF OUT CH3 CH4 S-VIDEO CABLEBOX LP 30561-003 CH 4 or CH 3 CH3 / CH4 Switch CH3 CH4 CH3 CH4 ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 CABLEBOX LP 30561-003 OUT IN S-VIDEO OUT IN 75 V ANT / CABLE 75 Ω ANT / CAB LE ...
Page 8 - Hookups with a Cable Box/Direct Broadcast System; Connections
ANT. IN VIDEO L R AUDIO (MONO) OUT IN OUT IN RF OUT CH3 CH4 S-VIDEO CABLEBOX LP 30561-003 75 Ω ANT / CAB LE OUT IN 8 Hookups with a Cable Box/Direct Broadcast System Connections 1 Connect a Cable signal to the IN jack on the Cable Box/DBS. 2 Use an RF coaxial cable (supplied) to connect the OUT jack...
Page 9 - With this connection:; • When you play a tape, make sure; Helpful Hint
Hookups with a Cable Box/Direct Broadcast System (cont’d) 9 ANT. IN VIDEO L R AUDIO (MONO) OUT IN OUT IN RF OUT CH3 CH4 S-VIDEO CABLEBOX LP 30561-003 IN OUT 75 Ω ANT / CAB LE Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN jack. 2 Use an RF coaxial cable (supplied) to connect the RF O...
Page 10 - 0 Installing/Removing the Lithium Battery; Replace the battery compartment cover.; Lithium Battery Warning
10 Installing/Removing the Lithium Battery You may install a lithium battery in the VCR. This will allow theVCR to save the clock setting and the programmed timerrecordings if a power outage occurs. The battery can back upyour timer recordings and clock setting for around six months(4,000 hours). Co...
Page 11 - Turning on Your VCR 11; Press the VCR button, then press the POWER button.; Instructions continue on page 12.
3 4 1 Turning on Your VCR 11 • Before turning on your VCR, make sure there are batteries in the remote control and the VCR, TV, and Cable Box/DBS (ifapplicable) are connected. • The menus will continue to appear every time you turn on the VCR until you complete the steps on pages 11-12. • If you wan...
Page 12 - Press the FF; you’ll only scan through channels that you receive.; • Auto or – – : – – may appear on; /OK button to leave the Controller
VCR TV VCR/TV QUICK PROGRAMMING POWER STILL/SLOW EJECT CH VOL EXIT/STATUS TIMER JOG/SHTL SMARTPICTURE INDEX AUDIO/MUTE MENU - + CBL / DBS 1 2 3 4 5 6 7 8 9 START STOP DATE DBS DAILY PLAY REW FF /OK STOP WEEKLY REV /OTR REC REC FWD - + - + SPEED 0 CLEAR 5-6 12 Turning on Your VCR (cont’d) 6 Press the...
Page 13 - Automatic Channel Setup 13; button, you will scan only
Automatic Channel Setup 13 5 Wait for the VCR to set upchannels. 2-4 1 Although your VCR may automatically memorize the channels youreceive when you turn it on for the first time, this function lets youset up channels again. Make each entry within one minute of theprevious entry. 5 Wait for a few mi...
Page 14 - Adding/Deleting Channels
14 Automatic Channel Setup (cont’d) Adding/Deleting Channels 2 Press the PLAY 8 or STOP 9 button to select TUNER SET UP, then press the FF : /OK button. 3 Press the PLAY 8 or STOP 9 button to select ADD/DELETE CH., then press the FF : /OK button. 4 Use the Number buttons, the CH(annel) 8 / 9 button,...
Page 15 - Setting the Clock 15; • To program the VCR so its clock; You make each entry within one minute of the previous entry.; Manual Clock Setting; CLOCK MANUALLY will appear briefly.; Instructions continue on page 16.
Setting the Clock 15 • To program the VCR so its clock will automatically move forward onehour in April and turn back onehour in October, see page 20. • To make corrections, follow steps 1-3, then press the FF : /OK button until the item you want to correct isflashing. Press the PLAY 8 or STOP 9 but...
Page 17 - Time Zone Selection; • When the power plug is connected; /OK button repeatedly
Setting the Clock (cont’d) 17 6 Press the EXIT/STATUS button. 7 An on-screen message will ask you to turn off the VCR.Press the POWER button to turn off the VCR.Auto will flash in the display panel until the clock is set. Leave theVCR turned off until the time appears on the display panel.If – – : –...
Page 18 - Manual PBS Channel Selection
3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the FF : /OK button. CABLE BOX USERS SET CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to OFF, PBS CH. will not be available inthe menu. If this happens, press the FF : /OK button to select AUTO CLOCK, then press the PLAY 8 ...
Page 19 - Automatic PBS Channel Selection
Setting the Clock (cont’d) 19 5 Press the PLAY 8 or STOP 9 button repeatedly so that AUTO flashes beside PBS CH. • To display the time on the display panel, press the EXIT/STATUSbutton repeatedly. • If you live near the boundary of an adjacent time zone, your PBSchannel may come from a differenttime...
Page 20 - 0 Daylight-Savings Time
20 Daylight-Savings Time 6 Press the EXIT/STATUS button. Follow the steps below to program the VCR so its clock willautomatically move forward one hour in April and turn back onehour in October. 3 Press the PLAY 8 or STOP 9 button to select CLOCK, then press the FF : /OK button. CABLE BOX USERS SET ...
Page 21 - Language Selection 21; • If you accidentally select Spanish or
Language Selection 21 5 Press the EXIT/STATUS button. Follow the steps below to change the language of the on-screendisplays and menus. 3 Press the STOP 9 button or PLAY 8 button to select LANGUAGE. • If you accidentally select Spanish or French and need English, followthese steps.1) Press the VCR b...
Page 22 - 2 Remote Control Buttons; • The buttons that are shaded in
VCR TV VCR/TV QUICK PROGRAMMING POWER STILL/SLOW EJECT CH VOL EXIT/STATUS TIMER JOG/SHTL SMARTPICTURE INDEX AUDIO/MUTE MENU - + CBL / DBS 1 2 3 4 5 6 7 8 9 START STOP DATE DBS DAILY PLAY REW FF /OK STOP WEEKLY REV /OTR REC REC FWD - + - + SPEED 0 CLEAR VCR ButtonPress this button before pressingVCR ...
Page 23 - • This remote control may or may
STILL/SLOW ButtonsWhile recording, press STILL/SLOW to temporarily stop the recording. Press a second time toresume normal recording. Details areon page 31. During tape playback,press STILL/SLOW once tofreeze the picture. Press repeatedlyto advance the Still picture frame byframe. Details are on pag...
Page 24 - Operation indicators; Searching; button so that A/V IN
Operation indicators These indicators tell you thecurrent operation of the VCR. 3 : Play, Forward and Reverse Searching \ : Record \I : Record Pause 3I : Still Picture +8 4 0 6 -15 dB NORM SP VCR 24 Display Panel Remote Sensor Receives a signal from your remotecontrol so you can operate your VCRfrom...
Page 25 - or Number buttons to change; Front Panel 25; Press to turn the VCR power on and off.
SUPER VHS ET - REC/OTR MENU/EXIT /OK S-VHS ET VCR/TV lingual ON SCREEN DISPLAY POWER SMARTPICTURE VRA 999 S-VHS HI-FI STEREO CHANNEL PLAY PAUSE/STILL STOP/EJECT +8 4 0 6 -15dB NORM SP VCR OPEN SUPER VHS ET @ FO R W D R E W IN D HI FI STEREO SMARTPICTURE A/V FRONT CONNECTORS- VCR/TV ButtonPress to se...
Page 26 - 6 Rear Panel; AC Power Cord
ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 CABLEBOX LP 30561-003 OUT IN S-VIDEO OUT IN S-VIDEO OUT Jack Connect an S-Video cable goingto the S-VIDEO IN jack of a TVhere. You may use S-Videoconnections instead of thestandard RCA-style video (yellow)connections. S-Video connectionsprovide a better ...
Page 27 - On-Screen Status Displays 27; • If ON SCREEN MODE is set to ON; Whenever you press the PLAY
On-Screen Status Displays 27 5 Press the EXIT/STATUS button. • If ON SCREEN MODE is set to ON or COUNTER:• You may bring up the status display at any time by pressingthe EXIT/STATUS button. (Theexception is during Slow, Search,or Still mode.) The display willappear for about five seconds. • Channel ...
Page 28 - 8 Setting the Remote Control to Operate a TV; • If you had to program the remote; button. If your remote control; button. Your TV may turn on or off automatically.; Find the code for your TV.; TV CODES
VCR TV VCR/TV QUICK PROGRAMMING POWER STILL/SLOW EJECT CH VOL EXIT/STATUS TIMER JOG/SHTL SMARTPICTURE INDEX AUDIO/MUTE MENU - + CBL / DBS 1 2 3 4 5 6 7 8 9 START STOP DATE DBS DAILY PLAY REW FF /OK STOP WEEKLY REV /OTR REC REC FWD - + - + SPEED 0 CLEAR 28 Setting the Remote Control to Operate a TV •...
Page 29 - Setting the Remote Control to Operate a Cable Box/DBS 29; button. If the remote control operates the
Setting the Remote Control to Operate a Cable Box/DBS 29 • If you had to program the remote control to operate your CableBox/DBS, whenever you replace thebatteries in the remote control, youmay have to program the remotecontrol again. • The remote control may only operate some features of yourCable ...
Page 30 - Press the EJECT button to remove the tape.; • Playback options and features are; Read and follow the steps below to play a tape.; If playback does not start automatically, press the PLAY; light will appear on the VCR display panel.; button to rewind the tape.
6 Press the EJECT button to remove the tape. 2 Insert a tape in the VCR. The power will come on. The VCRwill place itself in VCR position automatically (the VCR light willappear on the display panel of the VCR). If the VCR light does notappear, press the VCR/TV button once. If the tape’s record tabh...
Page 31 - light will; Read and follow the steps below to record a television program.; Press the VCR button.; light will appear on the display panel.
Recording 31 9 Press the STOP 9 button to stop recording. The \ light will disappear from the display panel. • If the REC(ord)/OTR button is pressed while a tape without arecord tab is in the VCR,PROTECTED CASSETTE CANNOTRECORD will appear on the screenbriefly. The VCR will eject the tape. • The VCR...
Page 34 - 4 One-Touch Recording; light will flash on the display panel.; To stop an OTR before recording is finished, press the STOP; Starting an OTR
34 One-Touch Recording 3 Press the REC(ord)/OTR button repeatedly until thedesired recording length appears briefly on the screen andon the display panel. The \ light will flash on the display panel. (The recording length will not appear on the screen if ONSCREEN MODE is set to OFF.) • To check the ...
Page 35 - Recording One Channel/Watching Another 35; button to; button to select the channel you want to; light will appear on the VCR display panel.)
Recording One Channel/Watching Another 35 5 To return to the channel being recorded, use the TVremote control to select channel 03 or 04 (whicheverchannel the CH3/CH4 switch on the back of the VCR is set to).Or, if the VCR remote control operates your TV, pressthe TV button, then use the CH(annel) 8...
Page 36 - 6 Setting Up the VCR Plus+ Programming System; Station; Station
36 Setting Up the VCR Plus+ Programming System 1 First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCRPlus+ programming system to work properly.Since the channel numbers of the stations you receive may not be the same as the station numbers, a...
Page 38 - 8 Timer Recording with the VCR Plus+ Programming System; • If you enter an incorrect PlusCode
38 Timer Recording with the VCR Plus+ Programming System • If you enter an incorrect PlusCode programming number at step 4,ERROR-RE-ENTER CODE will flashon the screen after step 5. Enter thecorrect PlusCode programmingnumber. Helpful Hint Follow the steps below to program a timer recording usingPlus...
Page 39 - Timer Recording with the VCR Plus+ Programming System (cont’d) 39; Turn off the VCR for a timer recording! Put a tape; light will appear on the display panel. The; • If you want to record the program one time only, go to
Timer Recording with the VCR Plus+ Programming System (cont’d) 39 Turn off the VCR for a timer recording! Put a tape in the VCR. Leave the Cable Box/DBS on. 9 Press the POWER button to turn off the VCR. The VCRmust be turned off for a timer recording to take place.The r light will appear on the disp...
Page 40 - 0 Quick Programming; • If you are using a DBS and are using
ONE TIME PROGRAM PROGRAM 1 CHANNEL +/– – – –START +/– – – : – – AM STOP +/– – – : – – AM REC SPEED SLP DATE +/– – – /– – /– – SET DAILY=8 OR WEEKLY=9TO END PUSH EXIT 40 Quick Programming Follow the steps below to program your VCR to record TVprograms while you’re away from home. The VCR will turn it...
Page 41 - Instructions continue on page 42.; Cassette type / Playback Time
Quick Programming (cont’d) 41 5 Press the Number 2/STOP+ or Number 5/STOP– buttonto set the recording’s stop time. Every time you press a button,the stop time changes in one-minute increments. If you press andhold a button, the stop time changes in 30-minute increments. 6 Press the SPEED button to s...
Page 42 - Press the POWER button to turn off the VCR. The; light; • If the end of the tape is reached
42 Quick Programming (cont’d) 10 Press the POWER button to turn off the VCR. The r light will appear on the display panel. (The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in theVCR.) The VCR must be turned off for a timer recording totake place....
Page 43 - Checking, Editing, or Clearing Timer Recordings; D indicates a Daily recording.
Quick Programming (cont’d) 43 • To stop a timer recording that is in progress, press the POWER button onthe remote control. • If you change the time or date, make sure the new time or date does notconflict with other timer recordings. • If you leave the VCR on past the scheduled start time of a time...
Page 44 - 4 Timer Recording Speed Setting; /OK button so that MANUAL appears
44 Timer Recording Speed Setting If a program is recording in SP and there is not enough tape torecord the entire program, the VCR automatically switches to SLPto allow complete recording if TIMER REC SPEED is set toAUTO. This feature is especially useful when you set a timerrecording for a program ...
Page 45 - Connecting the Controller 45; Controller
Connecting the Controller 45 If you are using a Cable Box/DBS, connect the Controller to your VCR. The Controller will automaticallyselect channels at the Cable Box/DBS during a timer recording. Leave your Cable Box/DBS turned onduring a timer recording. 2 Connect the Controller to the CABLE BOX Jac...
Page 46 - • If the EXIT/STATUS button is; Make each entry within one minute of the previous entry.; 6 Setting the Controller to Operate a Cable Box
5 Press the PLAY 8 or STOP 9 button to select the output channel, then press the FF : /OK button. The display shown below will appear. If CABLE BOX USERS SET CLOCKMANUALLY appears, follow steps 4-8 on page 16, then go to step6 on page 47. • If the EXIT/STATUS button is pressed during steps 5-8, “CAB...
Page 47 - If the Cable Box changes to channel 09, go to step 8.; Setting the Controller to Operate a Cable Box (cont’d) 47; CABLE BOX CODES
• If your Cable Box does not respond to any of the codes at step 7, theController will not change channelsat the Cable Box during a timerrecording. You must select thechannel to be recorded at the CableBox before a timer recording begins.Enter the Cable Box output channel(03 or 04) at step 3 on page...
Page 48 - 8 Setting the Controller to Operate a DBS; • The Controller can change channels
SELECT CODE NUMBEROF YOUR DBS RECEIVER 40 REFER TOINSTRUCTION BOOK TO SET PUSH , 9 TO TEST PUSH : /OK TO END PUSH EXIT 48 Setting the Controller to Operate a DBS • If you use a DBS, you must set the clock manually. Details are onpages 15-16. • Complete the steps on page 29 before proceeding. This wi...
Page 49 - • If your DBS does not respond to the; Setting the Controller to Operate a DBS (cont’d) 49; If the Cable Box changes to channel 205, go to step 8.; DBS CODES; Wait for a few seconds.
• If your DBS does not respond to the code in steps 6-7, the Controller willnot change channels at the DBSduring a timer recording. In thiscase, you must select the channel tobe recorded at the DBS before atimer recording begins. Enter theDBS output channel (03 or 04) atstep 3 on page 40. Leave the ...
Page 50 - • Unauthorized recording of copyrighted
ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 CABLEBOX LP 30561-003 OUT IN S-VIDEO OUT IN ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 CABLEBOX LP 30561-003 OUT IN S-VIDEO OUT IN 6 Press the PLAY button on VCR 1 and the REC(ord)/OTRbutton on VCR 2 at the same time. The \ light will appear on the VC...
Page 51 - Index Search 51
3 When you make a recording, the VCR automatically places anindex code at the beginning of the recording. Essentially, an indexcode is a type of “bookmark” for your tape. This feature is usefulif you have several different programs recorded on a single tape. Fast forward or rewind to the next or pre...
Page 52 - 2 Multi-Channel Television Sound System; • Hi-Fi Stereo Playback If a tape is recorded in stereo, you can; Receiving a Stereo Broadcast
52 Multi-Channel Television Sound System The VRA999 can receive and record programs broadcast in stereoor second audio. It can also play back tapes recorded in stereo orsecond audio. • Second Audio You can program your VCR so you can hear a program that is being broadcast in second audio or a tape t...
Page 53 - • If you want to connect the VCR to a
To receive and record programs broadcast in second audio, follow steps 1-6. To receive and record aprogram broadcast in stereo, make one of the connections shown, then follow steps 1-6. 6 Press the REC(ord)/OTR button to start recording. ANT. IN RF OUT ANT. IN VIDEO L R AUDIO (MONO) RF OUT CH3 CH4 C...
Page 54 - 4 Hi-Fi Stereo Tape Playback; • If Hi-Fi stereo continually reverts to
54 Hi-Fi Stereo Tape Playback • During playback, Hi-Fi stereo may temporarily revert to normal audiowhen you adjust tracking. This isnormal. • If Hi-Fi stereo continually reverts to normal audio during playback, youmay want to press the FF : /OK button to select MONO at step 3. • Only tapes recorded...
Page 55 - Video Stabilizer 55
• Regardless of the setting, this feature has no effect during recording orspecial effects playback. • To set VIDEO STABILIZER to OFF, follow steps 1-2 above. At step 3,press the FF : /OK button so that OFF appears beside VIDEO STABILIZER.Press the EXIT/STATUS button. Helpful Hints 4 Press the EXIT/...
Page 56 - 6 SmartPicture; Choose to soften the picture.
56 SmartPicture You can make the tape playback picture softer, sharper, morenatural, or more distinct by adjusting the SmartPicture setting.SmartPicture is set to NATURAL when you receive the VCR.Follow the steps below to adjust the SmartPicture setting. 2 While the setting appears, press the SMARTP...
Page 57 - Viewing a Still Picture; picture search will begin.; Repeat Playback; Playback Options 57
1 Press and hold the PLAY : button until the 3 light flashes on the display panel. Now, when a tape has finishedplaying, the VCR will rewind it and start playback again. The VCRwill play the tape 50 times. The 3 light on the display panel will flash during tape playback and while rewinding. TV progr...
Page 58 - Viewing Pictures in Slow to Fast Motion; Press the PLAY; • The Jog/Shuttle Light goes off after
58 Playback Options (cont’d) 3 Or, turn the inner dial (the Jog Dial) in either direction.The tape will move frame-by-frame at the speed with which thedial is turned. Viewing Pictures in Slow to Fast Motion 1 First, press the JOG/SHTL (shuttle) button while in thePlay or Still mode. The JOG/SHTL but...
Page 59 - 9 Child Lock; • If you lose your remote control; • The VCR power may come on briefly if you insert a tape. However,
59 Child Lock The Child Lock feature disables the buttons on the VCR andthe VCR feature buttons on the remote control. • If you lose your remote control when Child Lock is on, contactPhilips. Helpful Hint VCR TV VCR/TV QUICK PROGRAMMING POWER STILL/SLOW EJECT CH VOL EXIT/STATUS TIMER JOG/SHTL SMARTP...
Page 60 - 0 Blue Background
60 Blue Background If you want the TV screen to be solid blue when a weak signal isreceived, set BLUE BACKGROUND to ON. The screen will beblue and the sound will be muted. Or, if you want to receive theweak signal, set BLUE BACKGROUND to OFF. When you selecta channel that is receiving a weak signal,...
Page 61 - POWER OFF will appear on the screen. When; Automatic Operation Features 61
Automatic Playback When you put a tape in the VCR, the power will come onautomatically. If the tape’s record tab is missing, playback will begin. Automatic Rewind When a tape is played, fast forwarded, or recorded to its end, theVCR will rewind the tape to the beginning, then stop. The VCRwill not r...
Page 62 - scan through channels you receive.; Dubbing: copying a tape using a second VCR.
62 Glossary AUDIO IN/OUT Jacks: jacks located on the front and back of the VCR which are used to recordaudio from another source (IN) or to send audio to another system (OUT). Automatic Channel Programming: process in which the VCR scans all available channels andplaces the ones you receive in its m...
Page 63 - Specifications 63
Video HeadsFour heads with Hi-Fi stereo Video SignalEIA standards; NTSC color AntennaVHF/UHF – 75 ohm external antenna terminal VHF Output SignalChannel 3 or 4 (switchable)75 ohms unbalanced Power Requirement120V AC; 60 Hz Power Consumption22 W Operating Temperature41°F (5°C) to 104°F (40°C) Relativ...
Page 64 - 4 Helpful Hints; • Install new batteries (preferably alkaline) in the remote control.
64 Helpful Hints If you are having problems with your VCR, check the following list of problems and possible solutionsbefore requesting service. You may be able to solve the problem yourself.If you need to call a customer service representative, please know the model number and serial number ofyour ...
Page 66 - 6 Limited Warranty; VIDEO CASSETTE RECORDER
66 Limited Warranty VIDEO CASSETTE RECORDER 90 Days Free Labor/One Year Parts Exchange. This product must be carried in for repair. WHO IS COVERED?You must have proof of purchase to receive warrantyservice. A sales receipt or other document showingthat you purchased the product is considered proof o...
Page 68 - The following items are supplied with your VCR they
IB8142E001 LPT0243-001A S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your VCR; they are provided to help you use or set up your VCR. The following additional items are not provided with your VCR, but they are designed for use with your new VCR. To order these o...