Philips TAW6505/10 - User Manual

Turn on and off LED State Status 3 Get started Plug in the power x The speaker is powered by AC input. x Connect the AC IN socket on the speaker to an outlet (19V 2.1A) by using the provided power cable. x Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printe...

(For iOS and Android version) 1 2 3 4 5 4 Connect Connect to Wi-Fi (Wireless Operation) By connecting this unit and mobile phones, tablets (such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-Fi to control the ...

Note For iOS version only x Go to Settings. x Select Wi-Fi setting. 6 7 8 After connection, you can change the device name. There are several names to choose from or create your own by choosing Custom Name at the end of the name list. Otherwise, it follows the default name. After connection, this pr...

AirPlay setup 1 2 3 4 Note WPS mode 1 2 3 Note Use AirPlay to set up the Wi-Fi connection of iOS device (iOS7 or later) and soundbar. After connection, this product may perform a software update. Upgrade to the latest software when it is your first time set up. The software upgrade may take several ...

Pairing with Ambilight TV You can set the built-in LED light of the speaker to follow the color of your Philips Ambilight TV. Alternatively, you can set the light to show a preset color style or you can switch the light off. Press the button repeatedly on the speaker to switch the light mode: 1. Wor...

x To disconnect a device, press and hold for 2 seconds until the LED indicator blinks blue quickly. x When you turn on the speaker, it always automatically tries to reconnect the last successfully connected device. x To clear the pairing information, press and hold for 2 seconds until the LED indica...

Upgrade Firmware 1 2 3 Check if there is the latest firmware version on www.philips.com/support. Search for your model and click on “Software and drivers”. Download the firmware into a USB flash drive. Follow the instruction for the firmware upgrade. To get the best features and support, update your...

350 x 151 x 132mm 3.5Kg 7 Product specifications Note x Product information is subject to change without prior notice. 15 Power supply 100-240V a , 50/60Hz Weight (main unit) Wireless network 802.11 a/b/g/n/ac 2412-2472MHz 5725-5825MHz 12±2dBm 20±2dBm Bluetooth range A2DP approx.20m Bluetooth Blueto...

Wi-Fi Bluetooth General Warning 8 Troubleshooting x Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have ...

Play-Fi Cannot discover the Play-Fi supported devices from the app. x Make sure the device is connected to the Wi-Fi. Cannot play Play-Fi music x C ertain network service or contents available through the device may not be accessible in case the service provider terminates its service. x When the fi...

FCC Statement (USA and Canada only) Disposal of your old product 9 Notice Care of the environment Compliance Warning Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the product. Hereby, TP Visi...

These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communic...

Trademark notice For DTS patents, see http://patents.dts.com.Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies).DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trad...