Philips TAT1209PK/00 - User Manual

Page 2 - Contents

1 Important safety instructions 2 Hearing safety 2 General information 2 2 Your True wireless earpieces 4 What's in the box 4 Other devices 4 Overview of your True wireless earpieces 5 3 Get started 6 Charge the battery 6 How to wear 7 Pair for the �rst time 7 Pair with another Bluetooth device 8 4 ...

Page 3 - Important; Hearing safety

2 EN 1 Important safety instructions Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you ...

Page 5 - Other devices

2 Your True wireless earpieces What's in the box Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips oﬀers, register your product at www.philips.com/support. With these Philips True wireless earpieces you can: • Enjoy convenient wireless handsfree ...

Page 7 - Get started; Charge the battery; Charging Box

3 Get started Charge the battery Charging Box Earpieces • The earpieces start charging and the white LED light goes on • When the earpieces are fully charged, the white light will go oﬀ Place the earpieces in the charging box. Plug one end of the USB-C cable into the charging box and the other end i...

Page 8 - How to wear; Pair the earpieces with

How to wear Select suitable ear tips for optimum �t A tight, secure �t will provide the best sound quality and noise-cancellation. Pair the earpieces with your Bluetooth device for the �rst time Test which ear tips provide you with the best sound and wearing comfort. 3 sizes of silicone ear tips are...

Page 10 - Connect the earpieces to; Manage your calls and

The blue LED �ashes. The earpieces will search the last connected Bluetooth device and reconnect to it automatically. If the last connected one is not available, the earpieces will search and reconnect to the second last connected device. 4 Use your earpieces Connect the earpieces to your Bluetooth ...

Page 12 - Technical data

5 Reset the earpieces 1 2 3 4 5 6 On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT1209 from the device list. Turn oﬀ the Bluetooth function of your Bluetooth device. Return earpieces to charging box and open the lid. Press button on box twice. Follow steps in “Use your earpi...

Page 13 - Notice; Declaration of conformity; Remove the integrated

7 Notice Hereby, TP Vision Europe B.V. declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can �nd the Declaration of Conformity on www.philips.com/support. Declar...

Page 16 - Trademarks; Bluetooth

8 Trademarks The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Bluetooth Siri is a trademark of Apple Inc., reg...

Page 17 - The Bluetooth device cannot �nd the

9 Frequently asked questions My Bluetooth earpieces do not turn on. The battery level is low. Charge the earpieces. I cannot pair my Bluetooth earpieces with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before ...

Page 18 - Charge your headphones regularly.

Charge your headphones regularly. If the headphones are not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months. 17 EN

Philips TAT1209PK/00 - User Manual

Table of Contents:

Other Manuals for Philips TAT1209PK/00

Summary

Other Philips Models