Philips TAT1207BK/00 User Manual

Page 2 - Contents

1 Important safety instructions 2 Hearing safety 2 General information 2 2 Your True wireless earpieces 4 What's in the box 4 Other devices 4 Overview of your True wireless earpieces 5 3 Get started 6 Charge the battery 6 How to wear 7 Pair the earpieces with your Bluetooth device for the first time...

Page 3 - Important; Hearing safety

2 EN 1 Important safety instructions Hearing safety Be sure to observe the following guidelines when using your headphones.• Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so ...

Page 5 - Other devices

2 Your True wireless earphones What's in the box Philips True wireless earphones Philips TAT1207 Replaceable rubber ear caps x 3 pairs Other devices USB-C charging cable (for charging only) Quick start guide Global Warranty Safety leaflet Headpho nes Series CTN Congratulations on your purchase, and ...

Page 7 - Get started; Charge the battery; How to wear; Earpiece; Charging case

3 Get started Charge the battery  Before you use your headphones, place them in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime.  Use only the original USB-C charging cable to avoid any damage.  Finish your call before charging. Connecting the earpie...

Page 8 - Pair the earpieces with

Check left or right orientation of the earpiece. Insert the earpieces into the ears and twist slightly until a secure fit is achieved. Insert the earpieces 1 2 Single earpiece (Mono mode) Take either right or left earpiece out from charging case for Mono use. The earpiece will power on automatically...

Page 10 - Connect the earpieces to; Manage your music and

The blue LED flashes The earpieces will search the last connected Bluetooth device and reconnect to it automatically. 4 Use your earpieces Connect the earpieces to your Bluetooth device 1 2  If you turn on the Bluetooth function of your Bluetooth device after turning on the earpieces, you have to g...

Page 12 - Technical data

5 Reset the earpieces If you encounter any pairing or connection issue, you can follow the following procedure to reset your earpieces to factory default value. On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT1207 from the device list. Turn off the Bluetooth function of your...

Page 13 - Notice; Declaration of conformity

7 Notice Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Declaration of conformity Disposal of your old product ...

Page 16 - Trademarks; Bluetooth

8 Trademarks The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade-marks and trade names are those of their respective owners. Bluetooth Siri is a trademark of Apple Inc., re...

Page 17 - Clean your headphones regularly.; Frequently

My Bluetooth earpieces do not turn on. The battery level is low. Charge the earpieces. I cannot pair my Bluetooth earpieces with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earpieces. Pa...

Page 18 - Charge your headphones regularly.

APP DOWNLOAD Scan the QR code/press 'Download' button or search 'Philips Headphones' in Apple App Store or Google Play to download App. EN 17 • Be sure the headphones are completely dry before charging and using. Avoid using disposable alcohol pads or other substances for cleaning. Charge your headp...