Philips S10 - Manual

English EN 5 a Earpiece b LCD touch screen c • End a call. • Switch off the screen. • Press to power on the handset. • Press and hold to power off the handset. d Microphone e Micro USB socket (bottom of the handset) f Headset jack (bottom of the handset, compatible with mobile headset with microphon...

6 EN 3 Get started Caution • Make sure that you have read the safety instructions in the ‘Impor tant safety instructions’ section before you connect and install your handset. Connect the base station Warning • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage...

English EN 7 Install the handset Your handset comes with a high quality Lithium Ion Polymer batter y to maximize batter y lifetime. However, over time the capacity of the batter y will decrease. You can order replacement batteries through the Philips website or Philips ser vice. Caution • Risk of ex...

8 EN Change the remote access PIN code Note • The default answering machine remote access PIN code is 0000 and it is impor tant to change it to ensure the security. 1 Tap from the main menu screen. 2 Select [Remote access] > [Change PIN] . 3 Enter the old remote access PIN/passcode, then tap [OK]...

English EN 9 Check the signal strength The number of bars indicates the connection status between the handset and base station. The more bars are shown, the better the connection is. • Make sure the handset is connected to the base station before you make or receive calls and carr y out the function...

10 EN 4 Overview of the home screens Center home screen a The pull-down menu Pull down to quickly activate/deactivate [Alarm] and [Silent mode] . b Notifications/date and time In this area, notifications of missing calls, messages etc. are displayed. If no notification is available, the time and dat...

12 EN 5 Display icons In standby mode, the icons shown on top of the main screen inform you about the status of your phone. Icon Descriptions When the handset is off the base station/charger, the bars indicate the batter y level (from full to low). When the handset is on the base station/charger, th...

English EN 13 6 Bluetooth The MobileLink features of S10/S10A are enabled by Bluetooth wireless technology. With MobileLink , you can connect your phone to a compatible mobile phone to make and receive mobile calls on your S10/S10A handset, or you can download the contacts from your mobile phone or ...

14 EN From the handset 1 Tap from the main menu screen. 2 Place the mobile phone close to the base station, then tap [Find Me] on the handset. » The mobile phone name is displayed on the handset screen. 3 On the mobile phone, select Philips S10 and connect. 4 Enter the Bluetooth PIN/passcode on the ...

English EN 15 Delete a device You can select this option to delete your device. Disconnect a device You can select this option to disconnect your device. Note • If 2 devices are connected, you have to disconnect a device, before connecting another one. • You can see [Disconnect device] in the option...

16 EN 7 Calls Note • When the power fails, the phone cannot access emergency ser vices. Tip • Check the signal strength before you make a call or when you are in a call (see ‘Check the signal strength’ on page 9). Make a call 1 Press . » The vir tual keypad is displayed. 2 Dial the phone number, the...

English EN 19 8 Text and numbers Your phone has a vir tual keypad with which you can enter text and numbers for handset name, contact records, and other menu items.

20 EN 9 Contacts This phone has a contact list that stores up to 1000 entries entered on the phone or downloaded from a computer. You can download up to 500 entries each for up to 2 mobile phones. Each record can store up to 3 numbers. You can access any entr y in the contact list and use that entr ...

English EN 21 Add a record 1 Tap from the main menu screen to access the contact lists. 2 Tap the drop-down menu ( ) to select a contact list from the landline/the mobile line. » The contact list is displayed. 3 Tap to access the options menu. 4 Select [Add new contact] . 5 Enter the information, th...

22 EN Block a caller from the contact list You can choose to block a contact. When this contact calls you, the phone does not ring. However, you will still see the call notification on the handset screen. 1 Tap from the main menu screen to access the contact lists. 2 Tap the drop-down menu ( ) to se...

24 EN 10 Call log The call log stores the call histor y of all incoming, outgoing, or missed calls. The incoming call histor y includes the name and number of the caller, call time, and date. This feature is available if you have subscribed to the caller ID ser vice with your ser vice provider. Your...

English EN 25 Return a call 1 Tap from the main menu screen to access the call log. » The call log from the landline is displayed. 2 Select a call record. 3 Select an outgoing line. » The number is dialed. Tip • You can set the phone to automatically select a line for you, or to always make a call u...

26 EN 11 Telephone answering machine Note • The answering machine feature is available only for S10A. Your phone includes a telephone answering machine that records unanswered calls when it is on. By default, the answering machine is set to the [Answer & rec.] mode. You can also access the answe...

English EN 27 Record an announcement The maximum length of the announcement you can record is 3 minutes. The newly recorded announcement automatically replaces the old one. 1 Tap from the main menu screen. 2 Select [Announcement] > [Answer & rec.] > [Record new] . » Recording star ts after...

30 EN 12 Settings In [Settings] menu, you can customize the phone to your preferences. Phone settings Set the display language 1 Tap from the main menu screen. 2 Select [Phone settings] > [Language] . 3 Select a language. » The setting is saved. ECO mode The ECO mode reduces the transmission powe...

English EN 31 Name the handset The name of the handset can be up to 16 characters. It helps to identify a handset for conference calls if multiple handsets are connected to the base. 1 Tap from the main menu screen. 2 Select [Phone settings] > [Phone name] . 3 Enter or edit the name with the keyb...

32 EN Set the carrier code, area code, country code and domestic code You can enter these values for your phone’s current location if you have used them in entering numbers on your computer. In case you transfer a number to your phone, your phone will use this information to remove these codes from ...

English EN 33 Dial mode Note • This feature is countr y dependent and only applies to models that suppor t both tone and pulse dial. Dial mode is the telephone signal used in your countr y. The phone suppor ts tone (DTMF) and pulse (rotar y) dial. Consult the ser vice provider for detailed informati...

34 EN Phone software version You can check the current software version of your phone. 1 Tap from the main menu screen. 2 Select [Phone settings] > [Firmware version] . » The software version is displayed. Tip • To update your phone’s software, download the [Philips Phone Manager] software for yo...

36 EN 14 Set your sound preferences You can set the sound in the earpiece or handsfree mode among 5 different profiles using the [MySound Pro] application. 1 Tap from the main menu screen. 2 Select a profile. » The setting is saved. Set your sound preferences during a call Tap to access the options ...

English EN 37 15 Screen saver You can select your favorite pictures to be displayed as a screen saver in idle mode. 1 Tap from the main menu screen. 2 Select one or multiple pictures, then tap [Set] to confirm. 3 Tap to enter the options menu. 4 Select an option from: • [Transition time] to set the ...

38 EN 16 Silent mode You can set your phone to silent mode and enable it for a specific duration when you do not want to be disturbed. When the silent mode is turned on, your phone does not ring or send any aler ts or sound. Note • When you press to find your handset, or when you activate the alarm,...

English EN 39 17 Call barring You can block outgoing calls to numbers, such as overseas calls or undesirable hotlines by barring calls that star t with cer tain digits. You can create 4 sets of numbers with 4 digits at maximum for each set of numbers. When you make a call that star ts with one of th...

40 EN 18 Calendar By default the monthly view is displayed in the calendar and the current date is highlighted. You can create new, view and delete reminder events. Create new reminder events 1 Tap from the main menu screen. 2 Tap + . 3 Select the date and time. 4 Select [Reminder title] , enter the...

English EN 41 19 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. Create an alarm 1 Tap from the main menu screen. 2 Tap , then + . 3 Follow the on-screen instructions to set the alarm name, alarm time, recurrence options and alarm tones. » The ...

42 EN 20 Family notes You can leave your family a message on the phone screen. 1 Tap from the main menu screen. 2 Tap + to create a note. 3 Enter the text, then tap [Done] to save the message. 4 Tap to add the photo. 5 Tap [Post] to post the message. • To edit, select a message, then edit the text a...

English EN 43 21 Technical data General specification and features • 3.5” capacitive touchscreen with 16 million colors • Talk time: 14 hours • Standby time: 170 hours • Charging time: 6 hours • Range indoor : 50 meters • Range outdoor : 300 meters • Bluetooth range indoor : 12 meters • Multiple con...

English EN 45 Remove the integrated battery If there is no collection/recycling system for electronic products in your countr y, you can protect the environment by removing and recycling the batter y before disposing the phone. When this logo is attached to a product, it means a financial contributi...

46 EN 23 Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by WOOx Innovations Limited is under license. Google Google and the Google Logo are registered trademarks of Google Inc.

English EN 47 24 Frequently asked questions No signal bar is displayed on the screen. • The handset is out of range. Move it closer to the base station. • If the handset displays [Register your Handset] , register your handset. Tip • For fur ther information, see ‘Register additional handsets’ on th...