Philips RFX9200/37 - User Manual
Philips RFX9200/37 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Concept and realisation of the Guide:; RFX9200 Extender User Guide
- Page 3 – Contents
- Page 4 – How to Use the Extender; Introduction; in; in combination with the front blaster; • The Single IR emitters; instead of the front blaster; control the devices by using the Single IR emitters alone.
- Page 6 – Taking a Closer Look
- Page 7 – How to Install the Extender; To add more than one Extender to the project, see
- Page 8 – Once you have found the best position, you can optionally; mount; the Extender onto a piece; Tip; Slide the Extender in place.
- Page 9 – How to Install the Single IR Emitters; Plug the Single IR emitters into the Extender.; Note
- Page 10 – How to Do More
- Page 12 – Troubleshooting; How to Avoid Interference from Other Remote Controls
- Page 13 – any position
- Page 14 – Approbation & safety content RFX9200; FCC Compliancy
- Page 15 – Regulations According to R&TTE
RFX9200
www.pronto.philips.com
EN
Installer’s Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Concept and realisation of the Guide: Human Interface Group, De Regenboog 11, 2800 Mechelen (Belgium)www.higroup.com RFX9200 Extender User Guide © Copyright 2007 Philips Innovative Applications N.V., Interleuvenlaan 74-76, 3001 Leuven (Belgium) Remark: All rights are reserved. Reproduction in whole ...
EN G LI SH 3 Contents Contents 1 How to Use the Extender 4 1.1 Introduction 4 1.2 Taking a Closer Look 6 2 How to Install the Extender 7 2.1 How to Configure the Extender 7 2.2 How to Connect the Extender 7 2.3 How to Position the Extender when Using the Front Blaster 7 2.4 How to Install the Single...
4 How to Use the Extender 1 How to Use the Extender 1.1 Introduction Infrared (IR) remote controls do not work properly when obstacles between the remote control and the audio/video devices disturb the operating signal. This problem can be solved using radio frequency (RF) as a carrier for IR comman...