Page 2 - DICHIARAZIONE DI CONFORMITA’; Italia
2 Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. Tochange a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If th...
Page 4 - GENERAL INFORMATION; As an ENERGY STAR; Environmental information; his set complies with the radio interference
GENERAL INFORMATION 4 – 2 loudspeakers including 2 speaker cables– Remote control– 2 batteries for the remote control, size AA– AM (MW) loop antenna– FM wire antenna– Mains cable Place the set on a flat, hard and stabile surface. Make surethere is sufficient space around the set to preventoverheatin...
Page 5 - Note: Do not use a computer CDR or CDRW as recording will; All pre-recorded audio CDs; Discs for playback; INVISIBLE LASER RADIATION WHEN OPEN.; Note: This warning is located inside the enclosure.
GENERAL INFORMATION 5 For recording, make sure to use special audio discs only.These discs are marked “Digital Audio” and the logos shownbelow. There are two different types of audio discs for the use onthis CD recorder: – CD-Audio Recordable (CDR) discs These discs can be recorded on once andplay o...
Page 6 - CONTROLS AND CONNECTIONS; SPEAKERS 6; On the back
CONTROLS AND CONNECTIONS 6 1 AC MAINS ~ ........................ After all otherconnections have beenmade , connect the mains lead to the wall socket. For optimal performanceuse only the originalmains cable. 2 SPEAKERS 6 Ω FRONT L/R ...connect to the supplied speakers 3 LINE OUT L/R ...................
Page 7 - Note: Connecting the headphones will switch off the speakers.; On the front
CONTROLS AND CONNECTIONS 7 0 Source selectionCD 1, CD 2, CD 3 ..................selects the CD changer, switches to CD 1, CD 2 or CD 3 CDR ........................................selects the CD recorder TUNER ...................................selects the tuner DIGITAL / ANALOG AUX ....selects the i...
Page 8 - INSTALLATION; The type plate is located on the rear of the set.; AM antenna; AM AERIAL; Antenna connections
INSTALLATION 8 The type plate is located on the rear of the set. 1 Check whether the mains voltage as shown on the typeplate corresponds to your local mains voltage. If it does not,consult your dealer or service organisation. 2 Make sure all connections have been made beforeswitching on the mains su...
Page 9 - AUX Analog; DIGITAL IN; AUX Digital; DIGITAL OUT; Follow the instructions supplied with the subwoofer.; Connecting a subwoofer
INSTALLATION 9 AUX IN L/R It is possible to use an additional appliance, e.g. taperecorder, TV or VCR with the set. 1 Insert the red plug of a cinch cable to the red socketAUX IN R and the white plug to the white socket AUX IN L. 2 Connect the other end of the cinch cable to the audiooutputs of the ...
Page 10 - REMOTE CONTROL; Note: Always press the source key of the source you wish to; AA; Remote control batteries
REMOTE CONTROL 10 2 ...........................switches the set to standby CDR, TUNER, CD1, CD2, CD3, AUX ........selects the sourcesNumber/alphabet keys 1–0 ....................keys in numbers for tracks or stationsABC – XYZ ........keys in letters for textSPACE ...............keys in a space withi...
Page 11 - DISPLAY; Information area; Flags; Music calendar, sound lights and remote control; Display
DISPLAY 11 The display of the set is divided into 3 sections, which showyou the following: Information area This area is used for feedback of the CD changer, CD recorder,tuner frequencies, menu options, values and scrolling textmessages. Status lights and flags Flags CD TEXT ...........................
Page 12 - BASIC FUNCTIONS; To switch the set on; ) Do not load more than one disc into one disc tray.; Loading the CD changer, CD recorder; English
BASIC FUNCTIONS 12 • To switch the set on press y STANDBY ON on the set. • To switch the set to standby press y STANDBY ON again on the set ( 2 on the remote control). Important! 1) This system is designed for regular CD(RW)s. Therefore, do not use any accessories such as discstabilizer rings or CD ...
Page 13 - INCREDIBLE SURROUND; Note: The effect of Incredible Surround may vary with; PURE; If any source key is pressed:; Demo mode
BASIC FUNCTIONS 13 Volume adjustment • Adjust the volume by using MASTER VOLUME ( - VOLUME/ + on the remote control). y The volume level in dB (decibel) is displayed. DSCD igital S ound C ontrol enables you to select different preset sound settings.• Press DSC repeatedly to select the desired sound ...
Page 14 - CD text
BASIC FUNCTIONS 14 • Press either CD 1, CD 2 or CD 3 to select a particular disc. Selecting a track during playback • Rotate JOG CONTROL (press í or ë on the remote control) to skip to the beginning of the previous or nexttrack on the selected disc. y Playback continues with the selected track. Sele...
Page 15 - PROGRAM; If either CD 1, CD 2 or CD 3 is selected:; STEP; Note: If the maximum number of programmable tracks is; PROG; Note: When you open the CD recorder tray or the CD changer; PROG; Making a program for recording
PROGRAM 15 You can select tracks and store them either in the CD changeror CD recorder memory. If you use the program for playbackyou can choose one of the two memories, else if you like tospecify tracks for recording, use the CD changer memory only!You can store any track more than once. 1 Load the...
Page 16 - ABOUT RECORDING; Make sure the CDR(W) is absolutely free of; ALC; REC LEVEL key; DO NOT FORGET TO FINALIZE!; CD player and CD recorder.; Basic information
ABOUT RECORDING 16 The CD recorder deck offers you 3 main functions: – Recording from the internal CD changer and tuner or from a selected external source – Finalizing your CDR(W) discs and unfinalizing your CDRW discs – Erasing a CDRW disc The recording procedure is the same for CDR and CDRWdiscs. ...
Page 17 - INTERNAL RECORDING; High speed recording:; Record CD1; RECORDING IN PROGRESS; High speed recording and automatic finalizing
INTERNAL RECORDING 17 For internal recordings you can record from the internalCD changer or tuner. You can choose from the followingrecording modes: – High speed recording and automatic finalizing:Fast and easy! Record and finalize your CDR(W) in one quick step while the sound is muted. You can reco...
Page 18 - Rec Tr; Normal recording and listening
INTERNAL RECORDING 18 High speed recording of an entire disc, a track, aprogram or a track edit1 Make sure the CDR(W) is absolutely free of scratches anddust particles. 2 Press either CD 1, CD 2 or CD 3 to select the disc you wishto record from. 3 Press REC TYPE on the set to enter into the recordin...
Page 19 - Press REC TYPE on the set to enter the recording menu.; Press STOP; Manual recording
INTERNAL RECORDING 19 Manual recording from the FM tuner1 Make sure the CDR(W) is absolutely free of scratches anddust particles. 2 Press TUNER repeatedly to select the FM tuner. Then selectthe desired radio station (see “Tuning to radio stations”). 3 Press REC TYPE on the set to enter the recording...
Page 20 - EXTERNAL RECORDING; AUX Digital; Note: If you start playback on the selected source within a; Recording with automatic start
EXTERNAL RECORDING 20 When making recordings from an external source, werecommend to do analogue recording only if digital recordingis not possible. Digital recording will usually result in bettersound quality. Recording of an entire disc or a track with automatic start1 Make sure the CDR(W) is abso...
Page 21 - RECORDING IN; is flashing, check the digital; switch; Notes: – Track numbers cannot be changed after recording.; Automatic track increment
EXTERNAL RECORDING 21 Manual recording from an external source1 Make sure the CDR(W) is absolutely free of scratches anddust particles. 2 Press repeatedly DIGITAL / ANALOG AUX to select theinput for the external source you want to record from. y AUX Digital is displayed if the digital input is selec...
Page 22 - Auto finalizing; Final; Unfinalizing CDRW discs
(UN)FINALIZING, ERASING 22 Finalizing a CDR(W) disc is a simple procedure, necessary to: – play a recorded CDR on a standard CD player, – play a recorded CDRW on a CDRW compatible CD playerand CD recorder, – avoid further unwanted recordings on a disc, or – avoid erasure of tracks on a CDRW. Notes: ...
Page 23 - Erasing from a CDRW disc
(UN)FINALIZING, ERASING 23 It is possible to erase one or more tracks (starting from theend of the last track) or the entire CDRW. Erasing an entire CDRW1 Insert the CDRW you want to erase in the CD recorder tray. 2 Press CDR to select the CD recorder. 3 Press ERASE to enter the erasing menu. 4 Rota...
Page 24 - FEATURES; Storing text during stop mode; CD TEXT EDIT; Storing text during recording; Note: Editing text is not possible when a copy protected track is; Auto copied text; If you want to delete the character:
FEATURES 24 Storing text during stop mode After you have recorded your CDR(W) you can enter a text e.g.names to discs and tracks. The text will be displayed duringplayback. You can enter up to 60 characters per text field.Only use an unfinalized CDR or CDRW (finalized CDRW mustbe unfinalized first)....
Page 25 - Erasing from the memory; Note: If there are no discs in the text memory stored; until marker position; EDIT TRACK; Note: If you open the CD changer tray the edit is deleted.
FEATURES 25 Erasing text1 Press EDIT TEXT to enter the text edit menu. y CD TEXT EDIT is blinking, Text Edit is displayed. 2 Rotate JOG CONTROL to select the text erase menu. y Text Erase is displayed. 3 Press YES to confirm. 4 Rotate JOG CONTROL to select one of the following: y All Text : All text...
Page 26 - TUNER; Tuner; Automatic programming; Autoprogram; Notes: – If there are RDS stations available, they will be; Tuning to preset stations
TUNER 26 1 Press TUNER to select the tuner. y Tuner is scrolled. 2 Press TUNER again to select the desired waveband. y The selected waveband is displayed. 3 Keep ! SEARCH or ⁄ SEARCH ( à or á on the remote control) pressed for more than a half second. y The selected waveband and Searching are displa...
Page 27 - Switching through different RDS information; NEWS; Note: In order to avoid unwanted recordings, this function does; EON
TUNER 27 This feature R adio D ata S ystem is a service that allows FM stations to send additional information along with the regularFM radio signal. When you are receiving an RDS station, and the station name are displayed. Switching through different RDS information • Press RDS on the set repeated...
Page 28 - Clock setting
CLOCK/TIMER 28 It is possible to set the clock by using a time signal which isbroadcast together with the RDS signal. This only works if theRDS station is sending this time signal. Automatic clock setting1 Tune to an RDS station (see “Tuner”). 2 Press CLOCK/TIMER on the set for more than 3 seconds. ...
Page 29 - If you have chosen the tuner as source:; Sleep timer
CLOCK/TIMER 29 You can select different timer functions which will beactivated at a chosen time. Make sure the clock is set beforeusing one of these features. Alarm timer setting The set can be used as an alarm clock, whereby the tuner,CD recorder or CD changer starts playback automatically at apres...
Page 30 - TECHNICAL DATA; Subject to modification without notice.; Output; pp; Analogue recording, digital playback
TECHNICAL DATA 30 Subject to modification without notice. General AC Power ......................................................220–240 V / 50 HzPower consumption Active ...........................................................................81 WStandby .............................................
Page 31 - TROUBLESHOOTING; PROBLEM; WARNING
TROUBLESHOOTING 31 PROBLEM POSSIBLE CAUSE SOLUTION No sound, Volume is not correctly adjusted. Adjust the volume. no power Headphones are connected. Disconnect headphones. Speakers are wrongly or not connected. Make sure speakers are properly connected. Mains cable is not securely connected. Connect...
Page 32 - Meet Philips at the Internet; CLASS 1
3103 306 1690.1 FW-R7 VieEvS0010 Meet Philips at the Internet http://www. philips.com Deutsch Espa ñ ol English Fran ç ais W CLASS 1 LASER PRODUCT
Philips QP6652/61 User Manual
Philips QT4021 Manual
Philips QT4045 Manual
Philips QT4050/32 Manual
Philips QT4060 Manual
Philips QT4090 Manual
Philips RAMA FRESNEL & PC RANGE Manual
Philips RC144 5302 Manual
Philips RC4420 Manual
Philips Real Flat TV DVD Manual
Philips Remote Controls Manual
Philips RFX9400/37 User Manual