Page 2 - Table of contents
Introduction �������������������������������������������������3 Dear customer ...............................................................3About this user manual ..............................................3What’s in the box ..........................................................3Customer se...
Page 3 - Introduction; Dear customer; Symbols used; What’s in the box; Customer service center
Introduction 3 Introduction Dear customer Thank you for purchasing this projector.We hope you enjoy this product and the many functions it offers! About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily. Detailed descriptions ...
Page 4 - Setting up the product; Repairs
4 Philips · NeoPix 730 1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Sett...
Page 5 - Power supply; Overview; Top view; g f e d
Overview 5 Power supply Use only a power adapter which is certified for this product (see Technical data, page 18 ). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.The...
Page 6 - Front view; Rear view; Bottom view; Remote control
6 Philips · NeoPix 730 Front view c a b a Projection lens b Front IR sensor c Angle adjustment knob Turn the knob to adjust screen height. Rear view USB USB-C HDMI TM 1 HDMI TM 2 b c e d g f a a • Switch the projector on or to standby mode. • When the projector is on, the LED lights up in white. • W...
Page 7 - Initial setup; Install the projector
Initial setup 7 a Display all the input sources and allow you to switch to a different one. b OK Confirm a selection. c Open or close the settings menu. d Access the home screen. e / Increase or decrease the volume. f Start, pause or resume media playback . g / Skip to the previous or next media fil...
Page 8 - Connect to power supply
8 Philips · NeoPix 730 Front Ceiling 1 Mount the projector on the ceiling with upside up in front of the projection screen. A projector mount is required to mount the projector on ceiling. 2 If the projection direction is incorrect, press on the remote control to open the settings menu, go to Projec...
Page 9 - Prepare the remote control; Power on/off the projector; Screen size adjustment
Initial setup 9 Prepare the remote control CAUTION! The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control.Never expose the remote control to direct sunlight.Avoid deforming, dismantling or charging the batt...
Page 10 - Select the language; Connect to other
10 Philips · NeoPix 730 Screen height adjustment To adjust the screen height when placing the projector on a flat surface, turn the angle adjustment knob located at the bottom of the projector. Image shape adjustment V/H Keystone You can manually make the image rectangular by adjusting the horizonta...
Page 11 - Connect to a dongle
Connect to other devices 11 Connect to a device through HDMI™ ARC The HDMI™ 1 port on the projector supports Audio Return Channel (ARC). You can connect a compatible audio system (e.g. a home cinema system, AV receiver or sound bar) to the projector through HDMI™ ARC connection. With this connection...
Page 12 - Change projector; Input source settings
12 Philips · NeoPix 730 Connect to wired speakers or headphones You can connect wired speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones. • The internal speakers of the projector are deactivated automatically ...
Page 14 - Image settings; Other settings; Help information
14 Philips · NeoPix 730 Image settings You can view and change the following image settings. • Location : You can select a location and then modify the image settings. All the modified image settings will be associated with the selected (current) location. You can create up to 3 different sets of im...
Page 15 - Maintenance; Cleaning; Cleaning the lens; Update software; Update software through USB
Maintenance 15 6 Maintenance Cleaning DANGER! Follow the following instructions when cleaning the projector : Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do...
Page 16 - Troubleshooting; Power cycling
16 Philips · NeoPix 730 7 Troubleshooting Power cycling If a problem occurs and you cannot resolve it using the instructions in this user manual, try the following steps to resolve the problem.1 Turn the projector off by pressing twice. 2 Wait at least 10 seconds.3 Turn the projector on by pressing ...
Page 18 - Appendixes; Technical data
18 Philips · NeoPix 730 8 Appendixes Technical data Technology/optical Display technology ...............................................LCDLight source ........................................... single LED WLumens ...................................................................... 700Resolution...
Page 19 - Other notice
Appendixes 19 CE statement • The product shall only be connected to a USB interface of version USB 2.0 or higher. • Adapter shall be installed near the equipment and shall be easily accessible. • The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. • The plug is co...
