Page 2 - FCC NOTICE - COPYRIGHT; FCC NOTICE; CAUTION
I FCC NOTICE - COPYRIGHT FCC NOTICE This equipment has been tested and found to comply withthe limits for a Class A digital device, pursuant to part 15of the FCC (U.S. Federal Communications Commission)rules. These limits are designed to provide reasonableprotection against harmful interference when...
Page 3 - II
COPYRIGHT - CE II Copyright © This manual is copyrighted with all rights reserved. Under the copyrights law, this manual may not be copied in whole or part, without written consent. Under the law, copying includes translating into another language or format. Apple, Macintosh/II, PowerMacintosh, Appl...
Page 4 - ENGLISH; Inspection and unpacking
1 ENGLISH TABLE OF CONTENTS PREFACE 2 INTRODUCTION 2 - 3 MAIN FEATURES 4 - 5 SETTING UP YOUR NEW MONITOR 6 - 9 Inspection and unpacking 6 Connecting your monitor 7 - 9 INFORMATION AND USE OF THE CONTROL PANEL Control location and functions 10 HARDWARE OSD Adjustment: size position, geometry and spec...
Page 5 - This user manual contains the following informations:; PREFACE
ENGLISH 2 Thank you for purchasing the new MGD 203/MGD 403 high brightness monochrome monitor. We hope you will enjoy using it and we are confident that this quality product willmeet your highest expectations. This user manual contains the following informations: ‘ An introduction to the product fea...
Page 6 - INTRODUCTION
3 ENGLISH The new MGD 203/MGD 403 is a very high brightness, high resolution digitally controlledautoscan monochrome monitor, based on the CyberScreen technology. ® This new monitor, specifically designed for medical applications, gives unique performancesin term of brightness, resolution and spot s...
Page 8 - ADVANCED TECHNOLOGY; MAIN FEATURES
5 ENGLISH ADVANCED TECHNOLOGY The MGD 203/MGD 403 monitor includes the following advanced technologies:- CYBERSCREEN®: digital technology that allows the optimization of the picture qualityall over the screen, corners included.- MAGNETOMETER: the magnetic field inside your monitor may dramatically c...
Page 9 - AUTOSCAN; P l u g; a n d; P l a y
ENGLISH 6 AUTOSCAN This feature allows you to use your monitor with a wide range of video cards: the MGD203/MGD 403 monitor will automatically synchronize at all horizontal frequencies in therange 30 - 95 KHz and vertical frequencies in the range 50-170 Hz, and will automatical-ly discriminate the s...
Page 10 - GUN / 3 GUNS BRIGHTNESS; Active control range :; SHOW CONFIGURATION
7 ENGLISH 1GUN / 3 GUNS BRIGHTNESS This function allows to select (via OSD menu) between Low Brigtness Mode (even betterpicture sharpness and reduced eye strain) and High Brightness Mode (full brightness). WARNING: This function is available only if “1-BNC” input is selected since it has no muchsenc...
Page 11 - REFERENCE SETTING; Either Hsync or Vsync is missing, the power con sum-; RESOLUTION
ENGLISH 8 Note: REFERENCE SETTING Five different ‘pairs’ of brightness and contrast combinations can be defined, and storedin the monitor and selected via OSD menu. This feature is particularly attractive forOEMs using the monitor with multiple systems wich will save a lot of time in the facto-ry an...
Page 12 - Power cord; INSPECTION
9 ENGLISH Before installation, please check your monitor for physical damages which may haveoccurred during transport, and also check that the package includes all the items below: ´ Your new monitor (including pedestal) ´ Power cord ´ User manual ´ Signal cable (optional) In case any items are miss...
Page 13 - Connect the monitor to a grounded outlet.; Remove the connector protection from the rear cover.
ENGLISH 10 Follow these steps to connect the MGD 203/MGD 403 monitor to your computer: This monitor is equipped with a standard European or North American or United Kingdompower cord provided with ground wire (depending on where your monitor has been pur-chased). According to the AC power standards ...
Page 14 - Connection to the computer; DAISY CHAIN
11 ENGLISH figure 2 Connection to the computer 1. Connect the male plug of the mini D-Sub 15 pins cable (optional) to the D-SUB input connector at the rear of the monitor (see figure 2). 2. (Alternative) Connect the BNC connectors (VIDEO/H/V) of the video cable tothesocket on the back of the monitor...
Page 15 - It is to be used only by qualified personnel.
ENGLISH 12 figure 4 RS232 IN OUT DAISY-CHAIN RS232 IN OUT DAISY-CHAIN RS232 IN OUT DAISY-CHAIN UNIT # 1 UNIT # 2 UNIT # 6 FROMCOMPUTER SYSTEM figure 5 This connector, located on the back of the monitor, is provided for Service maintenance ofthe monitor through an extra RS232 line. It is to be used o...
Page 16 - INFORMATION AND USE OF THE CONTROL PANEL; Control location and functions
13 ENGLISH INFORMATION AND USE OF THE CONTROL PANEL Control location and functions A A Brightness -/+ ´ Adjusts brightness (brilliance of the screen) B B Contrast -/+ ´ Adjusts contrast (the ratio between the brightness of the brightest and darkest parts ofa picture). LED COLOR / MEANING TABLE OFF M...
Page 17 - HARDWARE ON SCREEN DISPLAY
ENGLISH 14 HARDWARE ON SCREEN DISPLAY An easy OSD menu to control and adjust by keyboard or mouse all the monitor parameters. The H. OSD has five languages selectable by the user. Hardware On Screen Display flow chart - MAIN MENU OSD FUNCTIONS GLOBAL MENU LOCAL MENU ____ 1-GUN / 3-GUNS ____ DEGAUSS ...
Page 18 - USER INTERFACE FUNCTIONS; DIRECT KEYBOARD FUNCTIONAL INTERFACE; USER SETTING; MODE
15 ENGLISH USER INTERFACE FUNCTIONS DIRECT KEYBOARD FUNCTIONAL INTERFACE The monitor is equipped with DIRECT KEYING FUNCTIONS control capability for brightness and contrast functions.When not locked, the operations are executed by using single front keys as following: A A Brightness - Decreases moni...
Page 19 - OVERVIEW FOR OSD KEY FUNCTIONALITY; OSD DAISY-CHAIN OPERATION WARNING WINDOW; KEYBOARD UNLOCK; GLOBAL MENU; ABC REDUCED
ENGLISH 16 ´ KEYBOARD UNLOCK While “Key Lock” warning message is displayed on screen, pressing ALL front keys together, the LOCAL KEYBOARD LOCK FUNCTION DIS-ABLED shell be locally executed in the monitor. The window shown below will be displayed on all enabled units (if daisy chain on) and will disa...
Page 20 - GLOBAL MENU CONTROLS
17 ENGLISH GLOBAL MENU CONTROLS The commands associed to the global menu are trasmitted over daisy chain (if enabled), and the other monitors connected receive and execute thecommands. A pop-up window appears with a message to indicate a change: e.g. The message window will be displayed on all appli...
Page 22 - LOCAL MENU
19 ENGLISH ´ REFERENCE SETTING Five different Brightness/Contrast parameters ‘pairs’ are available (Factory preset).They are identified with a number in the range 1-5. These val-ues can be modified using OSD Service Local Menu item ‘STORE REF. SET’. The Reference Setting #n choice defines which pair...
Page 23 - LOCAL MENU CONTROLS; ABC MASTER ON
ENGLISH 20 LOCAL MENU CONTROLS ´ SET MASTER ABC This function allows the monitor’s light sensor to operate as Master ABC Sensor for the Daisy-chained units. When enabled, the monitor sends (every2 seconds) through the Daisy-Chain a command sequence to set “Contrast and Brightness” of all units to a ...
Page 24 - ON
21 ENGLISH ´ SET ADDRESS This function allows to assign an unique address to each monitor in a Daisy Chain connection. This local operation is executed once during instal-lation. The address can be in the range 1-15.Note: Care must be taken to assign different addresses to each of the monitors conne...
Page 25 - ORBITING
ENGLISH 22 ´ ORBITING When enabled, the function causes a very slow movement of the image displayed on screen, shifting few millimeters upward, leftward, downwardand rightward in order to reduce the “ PRINTING” effect on the screen due to browning of glass and burn-in of phosphors of CRT tube displa...
Page 26 - LIGHT BAR
23 ENGLISH ´ OSD POSITION This function allows to move the OSD Menu window at the desired position on the screen. First “SELECT” key press will change the message ‘OSD POSITION’ to ‘OSD UP/DOWN’ (blinking) message, indicating that the function isactive, press + / - keys to move up/down the window. N...
Page 27 - TILT
ENGLISH 24 ´ STORE REFERENCE SETTINGS This function allows to modify the values of Brightness and Contrast associated to each of the 5 Reference Settings of the unit. The change is oper-ated on the currently active Ref. Setting in OSD Global Menu.The sequence of operations is: ➢ Select the reference...
Page 29 - SERVICE MENU
ENGLISH 26 ´ ABC REDUCTION-FACTORS COMBINED TO REF. SETTINGS Each of the five Reference Settings has its own couple of ABC_Reduction_Factor settings.At monitor power-on, the ABC_Setting corresponding to the active Reference Setting are used to drive the ABC_Reduction_Effect.Every time a new Referenc...
Page 30 - APPENDIX
Page 31 - APPENDIX 1
APPENDIX 1 The following specification are subject to change without notice. Specification limits are guaranteed for the pre-set timings at the “nominal picture size” TECHNICAL SPECIFICATIONS CRT 17/21 inches - Flat square CRT - Medium persistence white phosphor type P45 - Surface treatment Anti Gla...
Page 32 - APPENDIX 2; PIN ASSIGNMENT
APPENDIX 2 PIN ASSIGNMENT (1) The 15-pins D-sub connector (female) of the video signal cable: 5 10 15 1 6 11 (1) Pin N° Assignment Pin N° Assignment 1 V 1 video input 9 +5V EXT 2 V 2 video input/Sync on green 10 Logic ground 3 V 3 video input 11 Optional - connected to pin10 4 Ground 12 NC 5 Ground ...
Page 33 - APPENDIX 3; MGD 203 MECHANICAL SPECIFICATIONS - CARATERISTIQUES MECANIQUES; DIMENSIONS
APPENDIX 3 MGD 203 MECHANICAL SPECIFICATIONS - CARATERISTIQUES MECANIQUES WEIGHT - POIDS 24kg (52.9 lbs) DIMENSIONS : w x h x d (l x h x p) : 426 x 446 x 495 mm
Page 34 - APPENDIX 4; MGD 403 MECHANICAL SPECIFICATIONS - CARATERISTIQUES MECANIQUES
APPENDIX 4 MGD 403 MECHANICAL SPECIFICATIONS - CARATERISTIQUES MECANIQUES WEIGHT - POIDS 32kg (70.5 lbs) DIMENSIONS : w x h x d (l x h x p) : 498 x 485 x 557 mm
Page 35 - APPENDIX 5; Note: the severed plug must be destroyed to avoid a; The GREEN & YELLOW wire must be connected; WARNING - THIS APPLIANCE MUST BE EARTH GROUNDED
APPENDIX 5 This apparatus is supplied with an approved moulded13A plug. To change a fuse in this type of plug proceedas follow:1. Remove Fuse cover and fuse.2. Fit new fuse which should be a BS 1362 5A, A.S.T.A. or BSI approve type. 3. Refit the fuse cover. If the fitted plug is not suitable for you...
Page 36 - APPENDIX 6; MGD203 / MGD403 FACTORY PRESET VIDEO TIMINGS
APPENDIX 6 MGD203 / MGD403 FACTORY PRESET VIDEO TIMINGS NUM-9 ST-VGA-1 INT-31/100 INIT-31/120 VESA SUN-81/76 ITEM UNIT 1280x1024 640x480 625/100/2:1 525/120/2:1 1024x768 1280x1024 60 Hz VGA 100 Hz 120 Hz 85 Hz 76Hz Pixel Rate MHz 106.85 25.18 29.688 24.696 94.5 134.81 Hor. Freq. KHz 63 31.47 31.25 3...
