Philips HTS3377W/12 - Manual

7 High speed USB 2.0 Link and MP3 link Simply plug your USB device into the USB jack to play your MP3/WMA /JPEG/DivX fi les; or plug your por table media player to the MP3 LINK jack to enjoy the music play in superb sound quality. Sync the audio output with the video play Synchronise audio and video...

8 j MP3 LINK Connects a por table audio player • k ( USB ) Connects a USB suppor ted device. • Remote control a ( Standby-On ) Turns on the Home Theatre System • or switches to standby mode. When EasyLink is enabled, press • and hold for at least three seconds to turn all connected HDMI CEC-complian...

10 Place the product Place the product where it cannot be • pushed, pulled over or knocked down. Do not place it in an enclosed cabinet. Make sure that you have full access to the • power cord for easy disconnection of the product from the power supply. Wireless receiver is for HTS3377W, HTS3376W on...

11 Option 2: Connect to the HDMI jack 1 Connect a HDMI cable (not supplied) to the HDMI OUT jack on this Home Theatre System and the HDMI input jack on the T V. Note If your device suppor ts HDMI CEC , you can • control compliant devices with a single remote control. (see ‘Get star ted’ > ‘Use Ph...

12 Connect speaker cables to speakers For the rear speakers of HTS3277, HTS3377, HTS3376 and HTS3377W, HTS3376W only 1 Connect the speaker cables to the matching colour jacks on the speakers (or speaker stands). Connect speaker to speaker stand For the rear speakers of HTS3277, HTS3377, HTS3376 and ...

13 For HTS3377, HTS3376 and HTS3277. Different set of speakers for HTS3270, HTS3269 (see ‘Specifi cations’ > ‘Speakers’). 1 Connect the speakers and subwoofer to the matching jacks on this Home Theatre System. Note Ensure that the colours of the plugs and jacks • are matched. Connect speakers and...

14 Tip For better FM stereo reception, connect to an • ex ternal FM antenna. Connect audio cables/other devices Route the audio from other devices to this Home Theatre System to enjoy audio play with multi-channel surround capabilities. Connect audio to TV (also used for EasyLink control) 1 Connect ...

16 Note This Home Theatre System can only play/view • MP3, WMA , DivX (Ultra) or JPEG fi les that are stored on such devices. Press • USB to access the content and play the fi les. Connect power cord Warning Risk of product damage! Ensure that the • power supply voltage corresponds to the voltage pr...

17 Navigate through the menu 1 Point the remote control directly at the remote sensor on the Home Theatre System and select the desired function. 2 Press the following buttons on the remote control to navigate through the on-screen menus. Button Action Move up or down Move left or right OK Confi rm ...

18 Tip You can set the default language for DVD disc • menu (see ‘Adjust settings’ > ‘Preferences’ > [Disc Menu] ). Change speaker settings Ideally, the distance between listening position and all the speakers should be the same. If not, change the speaker settings based on their distance from...

19 Use Philips EasyLink Your product suppor ts Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note Philips does not guarantee 100% • interoperabilit...

20 5 Select [System Audio Control] > [On] , then press OK to star t scanning devices. Once complete, the audio input » mapping menu is displayed. For example, if the TV audio is connected to the AUX jack on this Home Theatre System, select [Aux] and map with the TV (brand name) at the right panel...

21 Select a play source On the main unit Press the • SOURCE button repeatedly to select: DISC > USB > FM > SCART IN > AUX > COAX IN > OPTI IN > MP3 LINK > DISC ... On the remote control Press • AUDIO SOURCE repeatedly to switch to the connected audio source: Display Device co...

22 Play video Note For video disc, playback always resumes from • the point where it was last stopped. To star t play from the beginning, press while the message is displayed. Control video play 1 Play a title. 2 Use the remote control to control the title. Button Action Star ts, pauses or resumes p...

23 Access DVD menu 1 Press DISC to access disc main menu. 2 Select a play option, then press OK . In some menus, press the • Numeric buttons to input your selection. To return to the title menu during • play, press BACK . Access VCD menu or preview menu The PBC (Playback Control) for VCD is activate...

24 Quick skip play to a specifi c time 1 During play, press INFO . The disc status menu is displayed. » 2 Press to view information, then press OK . • [TT Time] (title time) • [Ch Time] (chapter time) • [Disc Time] (disc time) • [Track Time] (track time) 3 Press the Numeric buttons to enter the time...

25 Note You can only play DivX videos that were • rented or purchased with the DivX registration code of this Home Theatre System (see ‘Adjust settings’ > ‘General setup’ > [DivX(R) VOD Code] ) . You can play DivX video fi les of up to 4 GB. • If the subtitle does not appear correctly, • chang...

26 Play photo Play photo as slideshow This product can play JPEG photos (fi les with .jpeg or .jpg ex tensions). 1 Inser t a disc or USB that contains the JPEG photos. 2 Press DISC or USB . Slideshow begins (for Kodak disc) or » a contents menu (for JPEG disc) is displayed. 3 Select the folder/album...

27 Audio continues to play till the end of » the disc. To stop slideshow play, press • . To stop music play, press • again. Play from USB device This product plays/views MP3, WMA, DivX (Ultra) or JPEG fi les on the following USB devices: digital camera that complies with the PTP • standard fl ash dr...

28 Play from radio Check that the FM antenna has been connected to this Home Theatre System. If not, connect the supplied FM antenna to the FM75 jack and fi x its ends to the wall. Tip For the best reception, place the antenna away • from your T V and other sources of radiation. For even better rece...

29 Search and store radio stations individually 1 Press RADIO . 2 Press / . It star ts searching until a radio station » is detected. 3 Repeat step 2 until you tune to the radio station you wish to store. To fi netune the radio frequency, • press / . 4 Press PROGRAM . The preset station number blink...

30 6 Select the audio track, then press OK . To select another track, repeat step • 6. To select all tracks, select • [Select All] in the menu and press OK . To deselect all tracks, select • [Deselect all] in the menu and press OK . 7 Select [Start] in the menu to conver t, then press OK . Once comp...

31 Select a preset sound 1 Press SOUND repeatedly to select the sound effect that is most suitable for the video or music you play. Video/Music Description ACTION / ROCK Enhanced low and high range for great sounding movie effects and atmosphere. Great for action movies and rock /pop music. CONCERT ...

32 3 Select an option, then press OK . 4 Select a setting, then press OK . To return to the previous menu, • press BACK . To exit the menu, press • SETUP . Note See the explanations of the above options in • the following pages. [EasyLink Setup] If this Home Theatre System is connected to HDMI CEC c...

34 [Speakers Delay] Sets the delay time for the centre and rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reaches the listening position at the same time. 1) To star t, press OK . 2) Select a speaker in the menu, then press to set the de...

35 [TV System] Changes this setting if the video does not appear correctly. By default, this setting matches the most common setting for T Vs in your countr y. • [PAL] – For PAL-system T V. • [NTSC] – For NTSC-system T V. • [Multi] – For T V that is compatible with both PAL and NTSC . [TV Display] S...

39 Note Do not remove the CD-R or USB when • sof tware updating is in progress. 8 Disconnect the power cord for a few seconds and connect again to reboot the system. Care Caution Never use solvents such as benzene, thinner, • cleaners available commercially or anti-static sprays intended for discs. ...

40 PCM: IEC 60958 • Dolby Digital: IEC 60958, IEC 61937 • DTS: IEC 60958, IEC 61937 • Radio Tuning range: FM 87.5–108 MHz (50 kHz) • 26 dB quieting sensitivity: FM 22 dBf • IF rejection ratio: FM 60 dB • Signal-to-noise ratio: FM 50 dB • Harmonic distor tion: FM 3% • Frequency response: FM 180 Hz~10...

42 Picture No picture. See T V manual for correct video input • channel selection. Change the T V channel until you see the DVD screen. Press • DISC . If you have changed the • [TV Display] setting, switch back to default mode: 1) Press to open the disc compar tment. 2) Press . 3) Press SUBTITLE . N...

43 The contents of the USB fl ash drive cannot be read. The USB fl ash drive format is not • compatible with this Home Theatre System. Drive is formatted with a different fi le • system which is not suppor ted by this unit (e.g. NTFS). Maximum size of memor y suppor ted is • 160 GB. No sound from th...

44 HDMI High-Defi nition Multimedia Inter face (HDMI) is a high-speed digital inter face that can transmit uncompressed high defi nition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. A...